A filled cell is a month with at least one published link in the loaded scope. A gap is a month with no published link, not a month without trade.
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
Published in 55 months between 2016-01 and 2026-07. Each published month is listed with its commodity code count in the table above.
at least one published link
no published link in this month
outside the loaded window
swap_horizPublished as both an importer and an exporter, against 49 commodity codes across 10 tariff chapters.
event_busyPublished in 55 of the 123 months from May 2016 to July 2026. A missing month is one with no published link, not a month without trade.
scatter_plotSpread across 10 tariff chapters, none of them holding half the loaded codes.
south_westThe chapter 32 codes are import only.
What it trades
Grouped by tariff chapter, most published codes first. Descriptions are HMRC’s own, verbatim. This list is bounded: codes outside the loaded coverage are not listed.
inventory_2Chapter 73Published 2016-05 to 2026-0723of 49 loaded codes47%
7326 90 98Articles of iron or steel, n.e.s.Import21months published, 2022-03 to 2026-07
7304 59 89Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, of an external diameter of > 406,4 mm (excl. cold-drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas, and products of subheading 7304 59 30)Import3months published, 2022-04 to 2022-06
7309 00 90Reservoirs, tanks, vats and similar containers, of iron or steel, for solids, of a capacity of > 300 l (excl. containers lined or heat-insulated or fitted with mechanical or thermal equipment and containers specifically constructed or equipped for one or more types of transport)ImportExport3months published, 2019-03 to 2023-03
7326 90 92Articles of iron or steel, open-die forged, n.e.s.Import3months published, 2022-04 to 2023-11
Show the 23 sampled codesShow fewer codesexpand_moreexpand_less
73Chapter-level link, no HMRC descriptionImport2months published, 2020-07 to 2020-08
7301 20 00Angles, shapes and sections, of iron or steel, weldedExport
inventory_2Chapter 84Published 2017-06 to 2026-0711of 49 loaded codes22%
8419 89 98Machinery, plant or laboratory equipment, whether or not electrically heated, for the treatment of materials by a process involving a change of temperature, n.e.s.ImportExport
inventory_2Chapter 72Published 2018-09 to 2024-027of 49 loaded codes14%
7219 21 10Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm, containing by weight >= 2,5 nickelImport
inventory_2Chapter 32Published 2022-08 to 2024-032of 49 loaded codes4%
3208 20 90Paints and varnishes, incl. enamels and lacquers, based on acrylic or vinyl polymers, dispersed or dissolved in a non-aqueous mediumImport
inventory_2Chapter 29Published 2016-05 to 2016-051of 49 loaded codes2%
inventory_2Chapter 40Published 2016-05 to 2016-051of 49 loaded codes2%
4016 99 97Articles of vulcanised rubber, n.e.s. (excl. hard rubber and those of cellular rubber)Export1
inventory_2Chapter 69Published 2018-04 to 2018-041of 49 loaded codes2%
6903 90 90Retorts, crucibles, mufflers, nozzles, plugs, supports, cupels, tubes, pipes, sheaths, rods, slide gates and other refractory ceramic goods (excl. those of siliceous fossil meals or of similar siliceous earths, articles of heading 6902, articles containing carbon, alumina or silica of subheading 6903.10.00 and 6903.90.10)Import
inventory_2Chapter 74Published 2025-09 to 2025-091of 49 loaded codes2%
inventory_2Chapter 85Published 2026-05 to 2026-051of 49 loaded codes2%
8504 40 95Static converters (excl. accumulator chargers, rectifiers, and inverters)Import1
inventory_2Chapter 90Published 2026-05 to 2026-051of 49 loaded codes2%
9026 10 21Electronic flow meters for measuring or checking the flow or level of liquids (excl. meters and regulators)Import1
2months published, 2021-11 to 2022-01
7307 21 00Flanges of stainless steel (excl. cast products)Import2months published, 2023-11 to 2026-06
7307 91 00Flanges of iron or steel (excl. cast or stainless products)Import2months published, 2022-03 to 2022-04
7308 90 98Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet)ImportExport2months published, 2023-09 to 2025-12
7304 39 82Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm (excl. cold-drawn or cold-rolled, of cast iron, line pipe of a kind used for oil or gas pipelines, casing, tubing and drill pipe of a kind used in drilling for oil or gas and tubes, and gas pipes of subheading 7304 39 50)Import1months published, 2022-04 to 2022-04
7304 39 83Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. cold-drawn or cold-rolled, of cast iron, line pipe of a kind used for oil or gas pipelines, casing, tubing and drill pipe of a kind used in drilling for oil or gas and tubes, and gas pipes of subheading 7304 39 50)Import1months published, 2022-04 to 2022-04
7304 39 88Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, of an external diameter of > 406,4 mm (excl. cold-drawn or cold-rolled, of cast iron, line pipe of a kind used for oil or gas pipelines, casing, tubing and drill pipe of a kind used in drilling for oil or gas and tubes, and gas pipes of subheading 7304 39 50)Import1months published, 2022-03 to 2022-03
7304 49 83Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, of an external diameter of <= 168,3 mm (excl. cold-drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, and casing and tubing of a kind used for drilling for oil or gas and tubes)Import1months published, 2023-11 to 2023-11
7304 49 85Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. cold-drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, and casing and tubing of a kind used for drilling for oil or gas and tubes)Import1months published, 2023-11 to 2023-11
7304 59 82Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, of an external diameter of <= 168,3 mm (excl. cold-drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas, and products of subheading 7304 59 30)Import1months published, 2022-04 to 2022-04
7304 59 83Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. cold-drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas, and products of subheading 7304 59 30)Import1months published, 2022-04 to 2022-04
7307 19 90Cast tube or pipe fittings of steelImport1months published, 2025-09 to 2025-09
7307 22 90Elbows and bends, of stainless steel, threaded (excl. cast products)Import1months published, 2023-11 to 2023-11
7307 93 99Butt welding fittings of iron or steel, with greatest external diameter > 609,6 mm (excl. cast iron or stainless steel products, elbows, bends and flanges)Import1months published, 2017-12 to 2017-12
7309 00 10Reservoirs, tanks, vats and similar containers, of iron or steel, for gases other than compressed or liquefied gas, of a capacity of > 300 l (excl. containers fitted with mechanical or thermal equipment and containers specifically constructed or equipped for one or more types of transport)Export1months published, 2016-05 to 2016-05
7309 00 51Reservoirs, tanks, vats and similar containers, of iron or steel, for liquids, of a capacity of > 100.000 l (excl. containers lined or heat-insulated or fitted with mechanical or thermal equipment and containers specifically constructed or equipped for one or more types of transport)Export1months published, 2025-10 to 2025-10
7309 00 59Reservoirs, tanks, vats and similar containers, of iron or steel, for liquids, of a capacity of <= 100.000 l but > 300 l (excl. containers lined or heat-insulated or fitted with mechanical or thermal equipment and containers specifically constructed or equipped for one or more types of transport)Import1months published, 2021-02 to 2021-02
7310 29 90Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material, of a capacity of < 50 l and of a wall thickness of >= 0,5 mm, n.e.s. (excl. containers for compressed or liquefied gas, or containers fitted with mechanical or thermal equipment, and cans which are to be closed by soldering or crimping)Import1months published, 2018-02 to 2018-02
4
months published, 2017-06 to 2026-07
8419 50 80Heat-exchange units (excl. those used with boilers and those made of fluoropolymers with inlet and outlet tube bores with inside diameters measuring <=3 cm)Import3months published, 2024-03 to 2025-04
8431 43 00Parts for boring or sinking machinery of subheading 8430.41 or 8430.49, n.e.s.Export2months published, 2024-09 to 2025-02
8413 11 00Pumps fitted or designed to be fitted with a measuring device, for dispensing fuel or lubricants, of the type used in filling stations or in garagesExport1months published, 2018-11 to 2018-11
Show the 11 sampled codesShow fewer codesexpand_moreexpand_less
8413 60 80Rotary positive displacement pumps, power-driven (excl. pumps of subheading 8413.11 and 8413.19, fuel, lubricating or cooling medium pumps for internal combustion piston engine, concrete pumps, gear pumps, vane pumps, screw pumps and hydraulic units)Import1months published, 2026-05 to 2026-05
8419 19 00Instantaneous or storage water heaters, non-electric (excl. instantaneous gas water heaters, solar water heaters and boilers or water heaters for central heating)Import1months published, 2017-06 to 2017-06
8419 31 00Dryers for agricultural productsExport1months published, 2021-08 to 2021-08
8421 99 90Parts of machinery and apparatus for filtering or purifying liquids or gases, n.e.s.Import1months published, 2024-06 to 2024-06
8428 90 90Lifting, handling, loading or unloading machinery, n.e.s.Import1months published, 2025-01 to 2025-01
8481 30 91Check "non-return" valves for pipes, boiler shells, tanks, vats or the like, of cast iron or of steelExport1months published, 2023-03 to 2023-03
8481 80 99Appliances for pipes, boiler shells, tanks, vats or the like (excl. pressure-reducing valves, valves for the control of pneumatic power transmission, check "non-return" valves, safety or relief valves, taps, cocks and valves for sinks, baths and similar fixtures, central heating radiator valves, valves for pneumatic tyres and inner-tubes, process control valves, globe valves, gate valves, ball andImport1months published, 2024-05 to 2024-05
4
months published, 2018-09 to 2019-11
7216 61 10c, l, u, z, omega or open-ended sections of iron or non-alloy steel, simply cold-formed or cold-finished, obtained from flat-rolled productsImport2months published, 2020-02 to 2020-03
72Chapter-level link, no HMRC descriptionImport1months published, 2021-03 to 2021-03
7211 90 80Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coatednon-perforatedImport1months published, 2024-02 to 2024-02
Show the 7 sampled codesShow fewer codesexpand_moreexpand_less
7214 10 00Bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils)Import1months published, 2021-01 to 2021-01
7218 99 80Semi-finished products of stainless steel, forged (excl. products of square or rectangular cross-section)Export1months published, 2023-03 to 2023-03
7222 40 90Angles, shapes and sections of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s.Import1months published, 2021-02 to 2021-02
3
months published, 2023-02 to 2024-03
3208 20 10Solutions based on acrylic or vinyl polymers in volatile organic solvents, containing > 50% solvent by weightImport1months published, 2022-08 to 2022-08
months published, 2016-05 to 2016-05
months published, 2016-05 to 2016-05
1
months published, 2018-04 to 2018-04
months published, 2025-09 to 2025-09
months published, 2026-05 to 2026-05
months published, 2026-05 to 2026-05
VESSCO ENGINEERING LTD · Tradaro
On the same codes
Traders published against the most of the same codes. A shared code is a shared commodity, not a relationship between them.