A filled cell is a month with at least one published link in the loaded scope. A gap is a month with no published link, not a month without trade.
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
Published in 79 months between 2016-01 and 2026-07. Each published month is listed with its commodity code count in the table above.
at least one published link
no published link in this month
outside the loaded window
swap_horizPublished as both an importer and an exporter, against 93 commodity codes across 15 tariff chapters.
event_availablePublished in every one of the 79 months from January 2016 to July 2022, without a gap.
scatter_plotSpread across 15 tariff chapters, none of them holding half the loaded codes.
north_eastThe chapter 84 codes are export only.
What it trades
Grouped by tariff chapter, most published codes first. Descriptions are HMRC’s own, verbatim. This list is bounded: codes outside the loaded coverage are not listed.
inventory_2Chapter 72Published 2016-01 to 2022-0429of 93 loaded codes31%
7222 11 11Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section of a diameter of >= 800 mm, containing by weight >= 2,5% nickelImportExport41months published, 2016-01 to 2020-05
7222 20 21Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section measuring >= 25 mm but < 80 mm and containing by weight >= 2,5% nickelImportExport29months published, 2016-01 to 2022-02
72Chapter-level link, no HMRC descriptionImportExport20months published, 2016-01 to 2021-08
7219 90 80Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, non-perforatedImportExport17months published, 2016-04 to 2021-03
Show the 29 sampled codesShow fewer codesexpand_moreexpand_less
7222 20 11Bars and rods of stainless steel, of circular cross-section of a diameter >= 80 mm, simply cold-formed or cold-finished, containing by weight >= 2,5% nickelImportExport12months published, 2016-03 to 2022-01
7222 20 31Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section measuring < 25 mm and containing by weight >= 2,5% nickel
inventory_2Chapter 76Published 2016-01 to 2022-0719of 93 loaded codes20%
7604 29 10Bars and rods of aluminium alloysImportExport
inventory_2Chapter 73Published 2016-08 to 2022-0511of 93 loaded codes12%
7304 41 00Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas)ImportExport
inventory_2Chapter 74Published 2016-01 to 2021-0610of 93 loaded codes11%
7407 29 00Bars, rods and profiles of copper alloys, n.e.s. (excl. such articles of copper-zinc base alloys "brass")ImportExport
inventory_2Chapter 75Published 2016-10 to 2019-034of 93 loaded codes4%
7505 12 00Bars, rods, profiles and wire, of nickel alloys, n.e.s. (excl. electrically insulated products)ImportExport
inventory_2Chapter 84Published 2016-03 to 2020-124of 93 loaded codes4%
8471 30 00Data-processing machines, automatic, portable, weighing <= 10 kg, consisting of at least a central processing unit, a keyboard and a display (excl. peripheral units)Export
inventory_2Chapter 39Published 2016-06 to 2021-093of 93 loaded codes3%
3916 90 50Monofilament of which any cross-sectional dimension > 1 mm, rods, sticks and profile shapes, of addition polymerisation products, whether or not surface-worked but not further worked (excl. that of polymers of ethylene and vinyl chloride)Import
inventory_2Chapter 61Published 2017-12 to 2017-123of 93 loaded codes3%
6104 62 00Women's or girls' trousers, bib and brace overalls, breeches and shorts of cotton, knitted or crocheted (excl. panties and swimwear)Import
inventory_2Chapter 81Published 2016-03 to 2021-113of 93 loaded codes3%
8108 90 30Titanium bars, rods, profiles and wire, n.e.s.ImportExport
inventory_2Chapter 83Published 2018-10 to 2020-062of 93 loaded codes2%
8302 10 00Hinges of all kinds, of base metalImportExport
inventory_2Chapter 49Published 2020-01 to 2020-011of 93 loaded codes1%
4901 91 00Dictionaries and encyclopaedias, and serial instalments thereofExport1
inventory_2Chapter 78Published 2020-01 to 2020-011of 93 loaded codes1%
inventory_2Chapter 82Published 2018-08 to 2018-081of 93 loaded codes1%
8205 51 00Household hand tools, non-mechanical, with working parts of base metal, n.e.s.Export1
inventory_2Chapter 85Published 2021-06 to 2021-061of 93 loaded codes1%
8543 70 05Portable battery operated electronic readers for recording and reproducing text, still image or audio fileExport1
inventory_2Chapter 88Published 2019-04 to 2021-061of 93 loaded codes1%
8803 30 00Parts of aeroplanes or helicopters, n.e.s. (excl. those for gliders)ImportExport
ImportExport
12months published, 2016-01 to 2021-09
7219 23 00Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mmImport10months published, 2017-01 to 2018-10
7228 60 80Bars and rods of alloy steel, other than stainless steel, cold-formed or cold-finished and further worked or hot-formed and further worked (excl. bars and rods of high-speed steel, silico-manganese steel or tool steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)ImportExport10months published, 2016-11 to 2019-05
7222 30 51Other bars and rods of stainless steel, containing by weight >= 2,5% of nickel, forgedImportExport8months published, 2016-03 to 2022-02
7219 34 10Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm, containing by weight >= 2,5% nickelImport5months published, 2019-04 to 2022-01
7222 20 29Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section measuring >= 25 mm but < 80 mm and containing by weight < 2,5% nickelImportExport5months published, 2019-02 to 2020-05
7222 20 81Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, containing by weight >= 2,5% nickel (excl. such products of circular cross-section)ImportExport5months published, 2019-07 to 2022-01
7219 21 10Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm, containing by weight >= 2,5 nickelImportExport2months published, 2018-11 to 2019-09
7219 24 00Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mmImport2months published, 2021-02 to 2022-01
7219 31 00Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 4,75 mmImport2months published, 2019-03 to 2019-07
7222 11 19Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section of a diameter of >= 800 mm, containing by weight < 2,5% nickelImportExport2months published, 2017-10 to 2019-02
7222 20 89Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, containing by weight < 2,5% nickel (excl. such products of circular cross-section)Import2months published, 2020-06 to 2021-10
7228 30 61Bars and rods of alloy steel other than stainless steel, only hot-rolled, hot-drawn or hot-extruded, of circular cross-section, of a diameter of >= 80 mm (other than of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.30.41 and excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)Import2months published, 2021-01 to 2021-08
7210 11 00Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", tinned, of a thickness of >= 0,5 mmExport1months published, 2020-11 to 2020-11
7218 10 00Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting)Export1months published, 2017-07 to 2017-07
7218 91 10Semi-finished products of stainless steel, of rectangular "other than square" cross-section, containing by weight >= 2,5% nickelExport1months published, 2019-06 to 2019-06
7220 12 00Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mmImport1months published, 2020-03 to 2020-03
7222 11 89Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section measuring < 80 mm and containing by weight < 2,5% nickelImport1months published, 2019-08 to 2019-08
7222 20 39Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section measuring < 25 mm and containing by weight < 2,5% nickelExport1months published, 2020-07 to 2020-07
7222 30 97Bars and rods of stainless steel, cold-formed or cold-finished and further worked, or hot-formed and further worked, n.e.s. (excl. forged products)Export1months published, 2019-07 to 2019-07
7225 19 90Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, cold-rolled "cold-reduced", non-grain-orientedImport1months published, 2016-12 to 2016-12
7228 40 90Bars and rods of alloy steel, other than stainless steel, only forged (excl. of high-speed steel, silico-manganese steel, tool steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)Export1months published, 2016-12 to 2016-12
7228 50 61Bars and rods of alloy steel, other than stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section, of a diameter of >= 80 mm (excl. of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.50.40, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)Import1months published, 2022-04 to 2022-04
7228 80 00Hollow drill bars and rods, of alloy or non-alloy steelExport1months published, 2017-11 to 2017-11
78
months published, 2016-01 to 2022-06
7606 12 99Plates, sheets and strip, of aluminium alloys, of a thickness of >= 6 mm, square or rectangular (excl. such products painted, varnished or coated with plastics)ImportExport77months published, 2016-02 to 2022-07
7606 11 91Plates, sheets and strip, of non-alloy aluminium, of a thickness of > 0,2 mm but < 3 mm, square or rectangular (excl. such products painted, varnished or coated with plastics, and expanded plates, sheets and strip)ImportExport28months published, 2016-01 to 2020-03
7606 12 92Plates, sheets and strip, of aluminium alloys, of a thickness of > 0,2 mm but < 3 mm, square or rectangular (excl. painted, varnished or coated with plastics, expanded plates, sheets and strip, beverage can body stock, end stock and tab stock)ImportExport26months published, 2017-07 to 2022-06
Show the 19 sampled codesShow fewer codesexpand_moreexpand_less
7606 11 93Plates, sheets and strip, of non-alloy aluminium, of a thickness of >= 3 mm but < 6 mm, square or rectangular (excl. such products painted, varnished or coated with plastics)ImportExport15months published, 2016-02 to 2020-07
7608 20 20Tubes and pipes of aluminium alloys, welded (excl. hollow profiles)ImportExport13months published, 2016-06 to 2019-10
7604 29 90Solid profiles, of aluminium alloys, n.e.s.ImportExport12months published, 2020-03 to 2022-03
7606 12 93Plates, sheets and strip, of aluminium alloys, of a thickness of >= 3 mm but < 6 mm, square or rectangular (excl. such products painted, varnished or coated with plastics)ImportExport10months published, 2018-10 to 2021-12
76Chapter-level link, no HMRC descriptionExport5months published, 2019-05 to 2021-08
7604 21 00Hollow profiles of aluminium alloys, n.e.s.Export2months published, 2020-05 to 2021-05
7606 12 20Plates, sheets and strip, of aluminium alloys, of a thickness of > 0,2 mm, square or rectangular, painted, varnished or coated with plastics (excl. beverage can body stock, end stock and tab stock)ImportExport2months published, 2017-12 to 2021-10
7616 99 90Articles of aluminium, uncast, n.e.s.Export2months published, 2019-02 to 2020-12
7606 11 10Plates, sheets and strip, of non-alloy aluminium, of a thickness of > 0,2 mm, square or rectangular, painted, varnished or coated with plasticsExport1months published, 2019-12 to 2019-12
7606 11 99Plates, sheets and strip, of non-alloy aluminium, of a thickness of >= 6 mm, square or rectangular (excl. such products painted, varnished or coated with plastics)Import1months published, 2017-02 to 2017-02
7606 12 11Beverage can body stock, of aluminium alloys, of a thickness of > 0,2 mmExport1months published, 2021-07 to 2021-07
7606 91 00Plates, sheets and strip, of non-alloy aluminium, of a thickness of > 0,2 mm (other than square or rectangular)Export1months published, 2018-03 to 2018-03
7607 11 11Aluminium foil, not backed, rolled but not further worked, of a thickness of < 0,021 mm, in rolls of a weight of <= 10 kg (excl. stamping foils of heading 3212, and foil made up as christmas tree decorating material)Export1months published, 2020-05 to 2020-05
7607 19 90Aluminium foil, not backed, rolled and further worked, of a thickness (excl. any backing) from 0,021 mm to 0,2 mm (excl. stamping foils of heading 3212, and foil made up as christmas tree decorating material)Export1months published, 2020-05 to 2020-05
7608 20 89Tubes and pipes of aluminium alloys (excl. such products welded or not further worked than extruded, and hollow profiles)Export1months published, 2020-02 to 2020-02
9
months published, 2019-02 to 2020-12
7304 11 00Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steelImport2months published, 2018-11 to 2022-05
7304 49 83Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, of an external diameter of <= 168,3 mm (excl. cold-drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, and casing and tubing of a kind used for drilling for oil or gas and tubes)Import1months published, 2022-05 to 2022-05
7304 49 89Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, of an external diameter of > 406,4 mm (excl. cold-drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, and casing and tubing of a kind used for drilling for oil or gas and tubes)Export1months published, 2022-01 to 2022-01
Show the 11 sampled codesShow fewer codesexpand_moreexpand_less
7304 49 93Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced", of an external diameter of <= 168,3 mm (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas and tubes, pipes and hollow profiles of heading 7304.49.10)Export1months published, 2021-10 to 2021-10
7304 51 89Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil, precision tubes, and , pipes and hollow profiles, straight and of uniform wall-thickness, containing by weight >= 0,9% but <= 1,15% caImport1months published, 2022-05 to 2022-05
7304 90 00Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron)Import1months published, 2022-01 to 2022-01
7308 90 98Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet)Export1months published, 2016-08 to 2016-08
7326 19 90Articles of iron or steel, closed-die forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills)Export1months published, 2020-08 to 2020-08
7326 90 94Articles of iron or steel, closed-die forged, n.e.s.Export1months published, 2021-11 to 2021-11
7326 90 98Articles of iron or steel, n.e.s.Export1months published, 2021-09 to 2021-09
40
months published, 2016-01 to 2020-07
7407 21 10Bars and rods, of copper-zinc base alloys "brass", n.e.s.ImportExport5months published, 2016-07 to 2020-07
7411 22 00Tubes and pipes of copper-nickel base alloys "cupro-nickel" or copper-nickel-zinc base alloys "nickel silver"Export2months published, 2016-02 to 2019-07
7412 20 00Copper alloy tube or pipe fittings "e.g., couplings, elbows, sleeves"Export2months published, 2016-03 to 2016-10
Show the 10 sampled codesShow fewer codesexpand_moreexpand_less
74Chapter-level link, no HMRC descriptionExport1months published, 2017-05 to 2017-05
7407 21 90Profiles of copper-zinc base alloys "brass", n.e.s.Export1months published, 2017-06 to 2017-06
7408 29 00Wire of copper alloys (other than copper-zinc alloys [brass], copper-nickel alloys [cupro-nickel] or copper-nickel-zinc alloys [nickel silver])Export1months published, 2016-08 to 2016-08
7409 29 00Plates, sheets and strip, of copper-zinc base alloys "brass", of a thickness of > 0,15 mm, not in coils (excl. expanded sheet and strip and electrically insulated strip)Export1months published, 2017-09 to 2017-09
7415 39 00Screw hooks, screw rings and the like, threaded, of copper (excl. standard screws and bolts and nuts)Export1months published, 2020-05 to 2020-05
7419 99 90Articles of copper, n.e.s.Export1months published, 2021-06 to 2021-06
16
months published, 2016-10 to 2019-01
7507 12 00Tubes and pipes of nickel alloysExport2months published, 2017-03 to 2017-10
7504 00 00Powders and flakes, of nickel (excl. nickel oxide sinters)Export1months published, 2019-03 to 2019-03
7506 20 00Plates, sheets, strip and foil, of nickel alloys (excl. expanded plates, sheets or strip)Export1months published, 2017-06 to 2017-06
2
months published, 2020-03 to 2020-12
8409 91 00Parts suitable for use solely or principally with spark-ignition internal combustion piston engine, n.e.s.Export1months published, 2020-01 to 2020-01
8414 80 59Reciprocating displacement compressors, having a gauge pressure capacity > 15 bar, giving a flow/h > 120 m (excl. compressors for refrigerating equipment and air compressors mounted on a wheeled chassis for towing)Export1months published, 2016-03 to 2016-03
8466 93 70No description publishedExport1months published, 2016-08 to 2016-08
2
months published, 2016-11 to 2018-02
3917 29 00Rigid tubes, pipes and hoses, of plastics (excl. those of polymers of ethylene, propylene and vinyl chloride)Export1months published, 2016-06 to 2016-06
3921 90 90Plates, sheets, film, foil and strip, of plastics, reinforced, laminated, supported or similarly combined with other materials, unworked or merely surface-worked or merely cut into squares or rectangles (excl. of cellular plastic, addition polymerization products, condensation polymerization products and rearrangement polymerization products; self-adhesive products and floor, wall and ceiling coveImport1months published, 2021-09 to 2021-09
1
months published, 2017-12 to 2017-12
6109 90 90T-shirts, singlets and other vests of textile materials, knitted or crocheted (excl. of wool, fine animal hair, cotton or man-made fibres)Import1months published, 2017-12 to 2017-12
6110 11 90Women's or girls' jerseys, pullovers, cardigans, waistcoats and similar articles, of wool, knitted or crocheted (excl. jerseys and pullovers containing >= 50% by weight of wool and weighing >= 600 g/article, and wadded waistcoats)Import1months published, 2017-12 to 2017-12
16
months published, 2016-03 to 2021-06
8108 90 50Titanium plates, sheets, strip and foilImportExport5months published, 2016-07 to 2021-11
81Chapter-level link, no HMRC descriptionExport1months published, 2017-07 to 2017-07
4
months published, 2018-10 to 2020-04
8302 20 00Castors with mountings of base metalExport1months published, 2020-06 to 2020-06
months published, 2020-01 to 2020-01
months published, 2020-01 to 2020-01
months published, 2018-08 to 2018-08
months published, 2021-06 to 2021-06
3
months published, 2019-04 to 2021-06
WILSONS LTD · Tradaro
On the same codes
Traders published against the most of the same codes. A shared code is a shared commodity, not a relationship between them.
UK traderHMRC trader directoryref 156490