Published trader · United Kingdom

PRECON PRODUCTS LTD

ImporterExporter

Directory snapshot: 2026-09-12. Address observation date, not a trade date.

HMRC trader directory · ref 158645 · published 2026-07 to 2026-07

32Commodity codes
1Months published
34Published links
2026-07First published
2026-07Last published

Months published

Commodity codes HMRC published this trader against, month by month, within the loaded coverage. A gap is a month with no published link in that coverage, not a month without trade.

2026-072026-07

Commodity codes on the record

Codes in the loaded coverage this trader is published against, most months first. Descriptions are HMRC’s own, verbatim. This list is bounded; codes outside the loaded coverage are not listed.

Commodity codeDescription (as published)DirectionMonthsWindow
2523 21 00White portland cement, whether or not artificially colouredImporter12026-07 – 2026-07
2523 29 00Portland cement (excl. white, whether or not artificially coloured)Exporter12026-07 – 2026-07
3209 10 00Paints and varnishes, incl. enamels and lacquers, based on acrylic or vinyl polymers, dispersed or dissolved in an aqueous mediumExporter12026-07 – 2026-07
3214 10 10Glaziers' putty, grafting putty, resin cements, caulking compounds and other masticsImporter12026-07 – 2026-07
3214 90 00Non-refractory surfacing preparations for facades, inside walls, floors, ceilings and the likeImporterExporter12026-07 – 2026-07
3916 20 00Monofilament with any cross-sectional dimension of > 1 mm, rods, sticks and profile shapes, whether or not surface-worked but not otherwise worked, of polymers of vinyl chlorideImporter12026-07 – 2026-07
3916 90 50Monofilament of which any cross-sectional dimension > 1 mm, rods, sticks and profile shapes, of addition polymerisation products, whether or not surface-worked but not further worked (excl. that of polymers of ethylene and vinyl chloride)Importer12026-07 – 2026-07
3917 21 10Rigid tubes, pipes and hoses, of polymers of ethylene, seamless and of a length > the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise workedImporter12026-07 – 2026-07
3919 10 80Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, in rolls <= 20 cm wide (excl. plastic strips coated with unvulcanised natural or synthetic rubber)Importer12026-07 – 2026-07
3920 10 89Plates, sheets, film, foil, tape, strip, of unexpanded polymers of ethylene, not reinforced and non-cellular "laminated" or supported or similarly combined with other materials, unworked or not further worked than surface-worked or only cut to square or rectangular shapes, with a thickness of > 0,125 mm (other than self-adhesive and floor, wall and ceiling coverings of heading 3918, and syntheticImporter12026-07 – 2026-07
3920 20 80Plates, sheets, film, foil and strip, of non-cellular polymers of propylene, not reinforced, laminated, supported or similarly combined with other materials, not further worked or only surface-worked and not cut to shapes other than rectangular "incl. square" of a thickness of > 0,10 mm, n.e.s.Importer12026-07 – 2026-07
3921 19 00Plates, sheets, film, foil and strip, of cellular plastic, unworked or merely surface-worked or merely cut into squares or rectangles (excl.those of polymers of styrene, vinyl chloride, polyurethanes and regenerated cellulose, self-adhesive products, floor, wall and ceiling coverings of heading 3918 and sterile surgical or dental adhesion barriers of subheading 3006.10.30)Importer12026-07 – 2026-07
3925 90 10Fittings and mountings intended for permanent installation in or on doors, windows, staircases, walls or other parts of buildings, of plasticsImporter12026-07 – 2026-07
3925 90 80Builders' ware for the manufacture of flooring, walls, partition walls, ceilings, roofing, etc. guttering and accessories, banisters, fences and the like, fitted shelving for shops, factories, warehouses, storerooms, etc., architectural ornaments such as fluting, vaulting and friezes, of plastics, n.e.s.ImporterExporter12026-07 – 2026-07
3926 90 97Articles of plastics and articles of other materials of heading 3901 to 3914, n.e.s.Importer12026-07 – 2026-07
4409 29 99Wood, continuously shaped "tongued, grooved, rebated, chamfered, V-jointed beaded, moulded, rounded or the like" along any of its edges, ends or faces, whether or not planed, sanded or end-jointed (excl. coniferous and tropical wood and bamboo, and mouldings for frames for paintings, photographs, mirrors or similar objects, blocks, strips and friezes for parquet or wood block flooring)Importer12026-07 – 2026-07
4411 94 10Fibreboard of wood or other ligneous materials, whether or not agglomerated with resins or other organic bonding agents, of a density of <= 0,5 g/cm (excl. mechanically worked or surface-covered; medium density fibreboard "MDF"; particle board, whether or not bonded with one or more sheets of fibreboard; laminated wood with a layer of plywood; cellular wood panels of which both sides are fibreboaImporter12026-07 – 2026-07
4822 90 00Bobbins, spools, cops and similar supports of paper pulp, paper or paperboard, whether or not perforated or hardened (excl. those for winding textile yarn)Importer12026-07 – 2026-07
6810 11 90Building blocks and bricks of cement, concrete or artificial stone, whether or not reinforced (excl. of light concrete with a basis of crushed pumice, granulated slag, etc.)Importer12026-07 – 2026-07
7217 10 10Wire of iron or non-alloy steel, in coils, containing by weight < 0,25% carbon, not plated or coated, whether or not polished, with a maximum cross-sectional dimension of < 0,8 mmImporter12026-07 – 2026-07
7217 10 90Wire of iron or non-alloy steel, in coils, containing by weight >= 0,6% carbon, not plated or coated, whether or not polished (excl. hot-rolled bars and rods)Exporter12026-07 – 2026-07
7222 40 90Angles, shapes and sections of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s.Importer12026-07 – 2026-07
7308 90 98Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet)Importer12026-07 – 2026-07
7314 19 00Woven cloth, incl. endless bands, of iron or steel wire (excl. stainless and woven products of metal fibres of a kind used for cladding, lining or similar purposes)Importer12026-07 – 2026-07
7314 20 10Grill, netting and fencing, welded at the intersection, having a mesh size of >= 100 cm , of ribbed iron or steel wire of a maximum cross-sectional dimension of >= 3 mmImporter12026-07 – 2026-07
7314 39 00Grill, netting and fencing, of iron or steel wire, welded at the intersection (excl. products of wire with a maximum cross-sectional dimension of >= 3 mm and having a mesh size of >= 100 cm , and grill, netting and fencing plated or coated with zinc)Importer12026-07 – 2026-07
7317 00 80Nails, tacks, drawing pins, corrugated nails, staples and similar articles, of iron or steel (excl. cold-pressed from wire, and staples in strips)Importer12026-07 – 2026-07
7326 90 98Articles of iron or steel, n.e.s.Importer12026-07 – 2026-07
7615 10 80Table, kitchen or other household articles and parts thereof, and pot scourers and scouring or polishing pads, gloves and the like, of uncast aluminium (excl. cans, boxes and similar containers of heading 7612, articles manufactured from foil of a thickness <= 0,2 mm, articles of the nature of a work implement, spoons, ladles, forks and other articles of heading 8211 to 8215, ornamental articles,Importer12026-07 – 2026-07
8205 59 80Hand tools, incl. glaziers' diamonds, of base metal, n.e.s.Importer12026-07 – 2026-07
8480 60 00Moulds for mineral materials (excl. moulds of graphite or other carbons, ceramic or glass moulds)Exporter12026-07 – 2026-07
9024 80 00Machines and appliances for testing the mechanical properties of materials (excl. metals)Importer12026-07 – 2026-07