A filled cell is a month with at least one published link in the loaded scope. A gap is a month with no published link, not a month without trade.
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
Published in 55 months between 2016-01 and 2026-07. The months are listed with their commodity codes in the table above.
at least one published link
no published link in this month
outside the loaded window
swap_horizPublished as both an importer and an exporter, against 53 commodity codes across 4 tariff chapters.
event_busyPublished in 55 of the 81 months from November 2019 to July 2026. A missing month is one with no published link, not a month without trade.
scatter_plotSpread across 4 tariff chapters, none of them holding half the loaded codes.
south_westThe chapter 76 codes are import only.
What it trades
Grouped by tariff chapter, most published codes first. Descriptions are HMRC’s own, verbatim. This list is bounded: codes outside the loaded coverage are not listed.
inventory_2Chapter 73Published 2019-11 to 2026-0724of 53 loaded codes45%
7306 61 10Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steelImport54months published, 2022-01 to 2026-07
7306 40 80Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excl. products cold-drawn or cold-rolled "cold-reduced", tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas)Import48months published, 2022-01 to 2026-07
7306 61 92Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mmImport36months published, 2022-02 to 2026-04
7306 30 72Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm, plated or coated with zinc (excl. line pipe of a kind used for oil or gas pipelines or casing and tubingof a kind used in drilling for oil or gas)Import19months published, 2022-02 to 2026-05
Show the 24 sampled codesShow fewer codesexpand_moreexpand_less
7306 61 99Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mmImport10months published, 2022-01 to 2026-04
7307 21 00Flanges of stainless steel (excl. cast products)Import
inventory_2Chapter 72Published 2022-04 to 2026-0720of 53 loaded codes38%
7222 20 81Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, containing by weight >= 2,5% nickel (excl. such products of circular cross-section)ImportExport
inventory_2Chapter 76Published 2023-04 to 2026-066of 53 loaded codes11%
7606 11 99Plates, sheets and strip, of non-alloy aluminium, of a thickness of >= 6 mm, square or rectangular (excl. such products painted, varnished or coated with plastics)Import8
inventory_2Chapter 84Published 2024-02 to 2026-063of 53 loaded codes6%
8466 93 60Parts and accessories for machine tools for working material by removing material of headings 8456 to 8461, n.e.s.Import1
Export
8months published, 2019-11 to 2026-03
7306 30 77Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel of an external diameter of <= 168,3 mm (excl. plated or coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe")Import7months published, 2022-04 to 2025-07
7304 41 00Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas)Import6months published, 2024-04 to 2025-06
7307 23 10Butt welding elbows and bends of stainless steel (excl. cast products)Import4months published, 2024-03 to 2025-06
7305 31 00Tubes and pipes having circular cross-sections and an external diameter of > 406,4 mm, of iron or steel, longitudinally welded (excl. products of a kind used for oil or gas pipelines or of a kind used in drilling for oil or gas)Import3months published, 2025-02 to 2025-05
7307 23 90Butt welding tube or pipe fittings of stainless steel (excl. cast products and elbows and bends)Import3months published, 2024-05 to 2026-06
7304 11 00Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steelImport2months published, 2023-10 to 2024-03
7306 40 20Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas)Import2months published, 2026-05 to 2026-06
7307 22 90Elbows and bends, of stainless steel, threaded (excl. cast products)Import2months published, 2026-02 to 2026-06
7314 49 00Grill, netting and fencing, of iron or steel wire, not welded at the intersection (excl. plated or coated with zinc or coated with plastics)Import2months published, 2025-08 to 2026-02
7301 20 00Angles, shapes and sections, of iron or steel, weldedImport1months published, 2025-06 to 2025-06
7307 19 90Cast tube or pipe fittings of steelImport1months published, 2026-06 to 2026-06
7307 22 10Sleeves, of stainless steel, threaded (excl. cast products)Import1months published, 2025-04 to 2025-04
7307 29 10Threaded tube or pipe fittings of stainless steel (excl. cast products, flanges, elbows, bends and sleeves)Import1months published, 2026-06 to 2026-06
7307 29 80Tube or pipe fittings of stainless steel (excl. cast, threaded, butt welding fittings and flanges)Import1months published, 2026-06 to 2026-06
7308 90 98Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet)Import1months published, 2024-04 to 2024-04
7314 31 00Grill, netting and fencing, of iron or steel wire, welded at the intersection, plated or coated with zinc (excl. products of wire with a maximum cross-sectional dimension of >= 3 mm and having a mesh size of >= 100 cm )Import1months published, 2026-04 to 2026-04
7314 39 00Grill, netting and fencing, of iron or steel wire, welded at the intersection (excl. products of wire with a maximum cross-sectional dimension of >= 3 mm and having a mesh size of >= 100 cm , and grill, netting and fencing plated or coated with zinc)Import1months published, 2026-04 to 2026-04
7318 19 00Threaded articles, of iron or steel, n.e.s.Import1months published, 2024-06 to 2024-06
8
months published, 2022-09 to 2026-06
7219 32 10Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but <= 4,75 mm, containing by weight >= 2,5% nickelImport6months published, 2024-04 to 2026-04
7219 33 10Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm, containing by weight >= 2,5% nickelImport6months published, 2024-04 to 2026-07
7219 21 10Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm, containing by weight >= 2,5 nickelImport4months published, 2025-11 to 2026-07
Show the 20 sampled codesShow fewer codesexpand_moreexpand_less
7222 20 21Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section measuring >= 25 mm but < 80 mm and containing by weight >= 2,5% nickelExport4months published, 2023-09 to 2025-09
7222 40 90Angles, shapes and sections of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s.Import4months published, 2025-04 to 2026-02
7219 32 90Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but <= 4,75 mm, containing by weight < 2,5% nickelImport3months published, 2026-02 to 2026-04
7222 20 89Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, containing by weight < 2,5% nickel (excl. such products of circular cross-section)Import3months published, 2024-03 to 2024-10
7210 49 00Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", not corrugated, plated or coated with zinc (excl. electrolytically plated or coated with zinc)Import2months published, 2022-05 to 2022-06
7219 22 10Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm but <= 10 mm, containing by weight >= 2,5% nickelImport2months published, 2025-05 to 2026-04
7219 23 00Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mmImport2months published, 2022-12 to 2026-02
7219 31 00Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 4,75 mmImport2months published, 2025-03 to 2025-05
7219 33 90Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm, containing by weight < 2,5% nickelImport2months published, 2025-07 to 2026-02
7219 21 90Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm, containing by weight < 2,5 nickelImport1months published, 2026-02 to 2026-02
7219 22 90Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm but <= 10 mm, containing by weight < 2,5% nickelImport1months published, 2026-02 to 2026-02
7222 20 11Bars and rods of stainless steel, of circular cross-section of a diameter >= 80 mm, simply cold-formed or cold-finished, containing by weight >= 2,5% nickelExport1months published, 2023-10 to 2023-10
7222 20 31Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section measuring < 25 mm and containing by weight >= 2,5% nickelExport1months published, 2024-02 to 2024-02
7222 40 50Angles, shapes and sections of stainless steel, not further worked than cold-formed or cold-finishedImport1months published, 2022-04 to 2022-04
7225 92 00Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated and products of silicon-electrical steel)Import1months published, 2022-05 to 2022-05
7228 60 20Bars and rods of tool steel, cold-formed or cold-finished and further worked or hot-formed and further worked (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)Export1months published, 2023-05 to 2023-05
months published, 2023-04 to 2026-04
7606 12 93Plates, sheets and strip, of aluminium alloys, of a thickness of >= 3 mm but < 6 mm, square or rectangular (excl. such products painted, varnished or coated with plastics)Import6months published, 2024-02 to 2026-06
7604 29 10Bars and rods of aluminium alloysImport3months published, 2024-06 to 2024-08
7606 11 93Plates, sheets and strip, of non-alloy aluminium, of a thickness of >= 3 mm but < 6 mm, square or rectangular (excl. such products painted, varnished or coated with plastics)Import3months published, 2023-09 to 2024-07
Show the 6 sampled codesShow fewer codesexpand_moreexpand_less
7606 12 92Plates, sheets and strip, of aluminium alloys, of a thickness of > 0,2 mm but < 3 mm, square or rectangular (excl. painted, varnished or coated with plastics, expanded plates, sheets and strip, beverage can body stock, end stock and tab stock)Import1months published, 2026-06 to 2026-06
7606 12 99Plates, sheets and strip, of aluminium alloys, of a thickness of >= 6 mm, square or rectangular (excl. such products painted, varnished or coated with plastics)Import1months published, 2025-11 to 2025-11
months published, 2025-11 to 2025-11
8473 30 80Parts and accessories of automatic data-processing machines or for other machines of heading 8471, n.e.s. (excl. electronic assemblies)Import1months published, 2024-02 to 2024-02
8481 80 81Ball and plug valves for pipes, boiler shells, tanks, vats or the like (excl. taps, cocks and valves for sinks, washbasins, bidets, water cisterns, baths and similar fixtures, and central heating radiator valves)Import1months published, 2026-06 to 2026-06
OPTIMA STAINLESS LTD · Tradaro
On the same codes
Traders published against the most of the same codes. A shared code is a shared commodity, not a relationship between them.
UK traderHMRC trader directoryref 187933