A filled cell is a month with at least one published link in the loaded scope. A gap is a month with no published link, not a month without trade.
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
Published in 126 months between 2016-01 and 2026-07. Each published month is listed with its commodity code count in the table above.
at least one published link
no published link in this month
outside the loaded window
swap_horizPublished as both an importer and an exporter, against 135 commodity codes across 17 tariff chapters.
event_busyPublished in 126 of the 127 months from January 2016 to July 2026. A missing month is one with no published link, not a month without trade.
scatter_plotSpread across 17 tariff chapters, none of them holding half the loaded codes.
north_eastThe chapter 94 codes are export only.
What it trades
Grouped by tariff chapter, most published codes first. Descriptions are HMRC’s own, verbatim. This list is bounded: codes outside the loaded coverage are not listed.
inventory_2Chapter 84Published 2016-01 to 2026-0731of 135 loaded codes23%
8481 90 00Parts of valves and similar articles for pipes, boiler shells, tanks, vats or the like, n.e.s.ImportExport5months published, 2023-10 to 2026-07
8409 91 00Parts suitable for use solely or principally with spark-ignition internal combustion piston engine, n.e.s.Export3months published, 2016-11 to 2025-01
8409 99 00Parts suitable for use solely or principally with compression-ignition internal combustion piston engine "diesel or semi-diesel engine", n.e.s.Export3months published, 2016-01 to 2019-08
8414 90 00Parts of: air or vacuum pumps, air or other gas compressors, fans and ventilating or recycling hoods incorporating a fan, and gas-tight biological safety cabinets, n.e.s.Export3months published, 2023-04 to 2023-11
Show the 31 sampled codesShow fewer codesexpand_moreexpand_less
8431 49 80Parts of machinery of heading 8426, 8429 and 8430, n.e.s.Export3months published, 2018-10 to 2023-06
8479 10 00Machinery for public works, building or the like, n.e.s.Export
inventory_2Chapter 73Published 2016-01 to 2026-0726of 135 loaded codes19%
inventory_2Chapter 87Published 2016-01 to 2026-0720of 135 loaded codes15%
8708 30 10Brakes and servo-brakes and their parts, for the industrial assembly of: pedestrian-controlled tractors, motor cars and vehicles principally designed for the transport of persons, vehicles for the transport of goods with compression-ignition internal combustion piston engine "diesel or semi-diesel engine" <= 2500 cm or with spark-ignition internal piston engine <= 2800 cm , special purpose motorExport
inventory_2Chapter 39Published 2016-01 to 2026-0711of 135 loaded codes8%
3917 10 90Artificial guts "sausage casings" of cellulose materialsExport7
inventory_2Chapter 40Published 2016-04 to 2026-0611of 135 loaded codes8%
4009 42 00Tubes, pipes and hoses, of vulcanised rubber (excl. hard rubber), reinforced or otherwise combined with materials other than metal or textile materials, with fittingsExport
inventory_2Chapter 85Published 2017-02 to 2025-1110of 135 loaded codes7%
8503 00 10Non-magnetic retaining rings for electric motors and electric generating setsExport1
inventory_2Chapter 72Published 2017-03 to 2024-074of 135 loaded codes3%
7209 15 00Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply cold-rolled "cold-reduced", not clad, plated or coated, of a thickness of >= 3 mmImport
inventory_2Chapter 74Published 2020-04 to 2024-024of 135 loaded codes3%
inventory_2Chapter 68Published 2018-09 to 2020-092of 135 loaded codes1%
6813 20 00Friction material and articles thereof, e.g. sheets, rolls, strips, segments, discs, washers and pads, for clutches and the like, not mounted, containing asbestos, whether or not combined with textile or other materialsExport
inventory_2Chapter 83Published 2016-01 to 2025-032of 135 loaded codes1%
8307 10 00Flexible tubing of iron or steel, with or without fittingsImportExport
inventory_2Chapter 90Published 2020-06 to 2024-082of 135 loaded codes1%
9031 10 00Machines for balancing mechanical partsExport1
inventory_2Chapter 92Published 2016-06 to 2025-082of 135 loaded codes1%
inventory_2Chapter 82Published 2021-01 to 2021-011of 135 loaded codes1%
8207 90 10Interchangeable tools for hand tools, whether or not power-operated, or for machine tools, with working parts of diamond or agglomerated diamond, n.e.s.Export
3months published, 2018-05 to 2018-10
8484 10 00Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metalExport3months published, 2016-08 to 2019-10
8459 10 00Way-type unit head machines for drilling, boring, milling, threading or tapping metalExport2months published, 2018-07 to 2020-02
8459 70 00Threading or tapping machines for metals (excl. way-type unit head machines)Export2months published, 2019-06 to 2019-10
8466 94 00Parts and accessories for machine tools for working metal without removing material, n.e.s.ImportExport2months published, 2019-05 to 2023-05
8479 90 80Parts of machines and mechanical appliances having individual functions, n.e.s. (excl. of cast iron or cast steel)Export2months published, 2016-04 to 2016-10
8481 10 05Pressure-reducing valves combined with filters or lubricatorsExport2months published, 2019-06 to 2021-01
84Chapter-level link, no HMRC descriptionExport1months published, 2020-01 to 2020-01
8412 90 80Parts of non-electrical engines and motors, n.e.s.Export1months published, 2019-04 to 2019-04
8414 80 80Air pumps and ventilating or recycling hoods incorporating a fan, whether or not fitted with filters, with a maximum horizontal side > 120 cm (excl. vacuum pumps, hand- or foot-operated air pumps, compressors and gas-tight biological safety cabinets)Export1months published, 2024-02 to 2024-02
8424 10 00Fire extinguishers, whether or not chargedExport1months published, 2020-03 to 2020-03
8431 10 00Parts of pulley tackles and hoists (other than skip hoists), winches, capstans and jacks, n.e.s.Export1months published, 2019-05 to 2019-05
8431 20 00Parts of fork-lift trucks and other works trucks fitted with lifting or handling equipment, n.e.s.Export1months published, 2024-07 to 2024-07
8442 30 00Machinery, apparatus and equipment for preparing or making printing plates, cylinders or other printing components (excl. machines of headings 8456 to 8465)Import1months published, 2022-08 to 2022-08
8451 90 00Parts of machines for washing, cleaning, wringing, drying, ironing, pressing, bleaching, dyeing, dressing, finishing, coating or impregnating textile yarns, fabrics or made-up textile articles; parts of machines used in the manufacture of linoleum or other floor coverings for applying the paste to the base fabric or other support; parts of machines for reeling, unreeling, folding, cutting or pinkiExport1months published, 2018-04 to 2018-04
8452 10 90Sewing machines and heads, of the household type (excl. lock-stitch sewing machines with heads weighing <= 16 kg without motor or <= 17 kg with motor and heads weighing <= 16 kg without motor or <= 17 kg with motor)Export1months published, 2025-08 to 2025-08
8456 11 10Machine tools for working any material by removal of material, operated by laser, of a kind used solely or principally for the manufacture of printed circuits, printed circuit assemblies, parts of heading 8517, or parts of automatic data processing machinesImport1months published, 2019-09 to 2019-09
8459 29 00Drilling machines for working metal, not numerically controlled (excl. way-type unit head machines and hand-operated machines)Export1months published, 2019-07 to 2019-07
8462 99 80Presses, not hydraulic, not numerically controlled, for working metals (excl. forging, bending, folding, straightening and flattening presses)Export1months published, 2020-10 to 2020-10
8463 10 10Draw-benches for metal wireExport1months published, 2019-12 to 2019-12
8464 20 19Grinding or polishing machines, for cold-working glass (other than optical glass)Export1months published, 2018-05 to 2018-05
8479 90 70Parts of machines and mechanical appliances having individual functions, n.e.s. (excl. of cast iron or cast steel)Export1months published, 2021-03 to 2021-03
8480 10 00Moulding boxes for metal foundryExport1months published, 2025-07 to 2025-07
8481 20 10Valves for the control of oleohydraulic power transmissionExport1months published, 2016-02 to 2016-02
8481 30 99Check "non-return" valves for pipes, boiler shells, tanks, vats or the like (excl. those of cast iron or steel)Export1months published, 2020-12 to 2020-12
8484 90 00Sets or assortments of gaskets and similar joints, dissimilar in composition, put up in pouches, envelopes or similar packingsExport1months published, 2020-09 to 2020-09
months published, 2017-05 to 2020-12
7326 19 90Articles of iron or steel, closed-die forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills)Export9months published, 2016-03 to 2017-09
7318 29 00Non-threaded articles, of iron or steelExport8months published, 2016-10 to 2020-10
7326 90 98Articles of iron or steel, n.e.s.ImportExport8months published, 2016-02 to 2017-09
Show the 26 sampled codesShow fewer codesexpand_moreexpand_less
7307 22 10Sleeves, of stainless steel, threaded (excl. cast products)ImportExport7months published, 2017-07 to 2025-03
7307 29 80Tube or pipe fittings of stainless steel (excl. cast, threaded, butt welding fittings and flanges)Export7months published, 2016-07 to 2025-02
7307 29 10Threaded tube or pipe fittings of stainless steel (excl. cast products, flanges, elbows, bends and sleeves)Export6months published, 2016-01 to 2026-06
7307 19 10Tube or pipe fittings of cast iron (excl. of non-malleable)ImportExport5months published, 2017-09 to 2023-07
7326 90 50Reels for cables, piping and the like, of iron or steelExport5months published, 2016-01 to 2020-11
7307 11 10Tube or pipe fittings of non-malleable cast iron, of a kind used in pressure systemsExport4months published, 2018-11 to 2019-06
7307 99 80Tube or pipe fittings, of iron or steel (excl. of cast iron or stainless steel, threaded, butt welding fittings, and flanges)Export4months published, 2017-03 to 2020-12
7304 90 00Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron)Export3months published, 2024-10 to 2026-07
7307 19 90Cast tube or pipe fittings of steelImport3months published, 2016-09 to 2020-02
7318 12 10Wood screws of stainless steel (excl. coach screws)Export3months published, 2016-04 to 2019-11
7318 19 00Threaded articles, of iron or steel, n.e.s.ImportExport3months published, 2016-08 to 2020-12
7325 99 90Articles of cast steel, n.e.s. (excl. grinding balls and similar articles for mills)Export2months published, 2016-04 to 2017-11
7326 11 00Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further workedExport2months published, 2019-12 to 2020-05
7306 11 10Line pipe of a kind used for oil or gas pipelines, longitudinally welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mmExport1months published, 2019-11 to 2019-11
7307 11 90Tube or pipe fittings of non-malleable cast iron (excl. products of a kind used in pressure systems)Export1months published, 2019-06 to 2019-06
7307 22 90Elbows and bends, of stainless steel, threaded (excl. cast products)Export1months published, 2018-08 to 2018-08
7307 91 00Flanges of iron or steel (excl. cast or stainless products)Export1months published, 2020-08 to 2020-08
7318 14 91Spaced-thread screws of iron or steel other than stainlessExport1months published, 2019-07 to 2019-07
7318 14 99Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws)Export1months published, 2020-07 to 2020-07
7318 16 31Blind rivet nuts of stainless steelExport1months published, 2018-01 to 2018-01
7318 21 00Spring washers and other lock washers, of iron or steelExport1months published, 2021-01 to 2021-01
7323 99 00Table, kitchen or other household articles, and parts thereof, of iron other than cast iron or steel other than stainless (excl. enamelled articles; cans, boxes and similar containers of heading 7310; waste baskets; shovels and other articles of the nature of a work implement; cutlery, spoons, ladles etc. of heading 8211 to 8215; ornamental articles; sanitary ware)Export1months published, 2023-03 to 2023-03
69
months published, 2020-07 to 2026-07
8708 99 97Parts and accessories for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. of closed-die forged steel)ImportExport37months published, 2016-01 to 2026-06
8708 30 99Brakes and servo-brakes and their parts, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.30.10 and for disc brakes)ImportExport20months published, 2016-09 to 2026-07
8714 10 10Brakes and parts thereof, of motorcycles "incl. mopeds"ImportExport18months published, 2018-12 to 2025-07
Show the 20 sampled codesShow fewer codesexpand_moreexpand_less
8708 91 20Radiators and parts thereof, for the industrial assembly of: pedestrian-controlled tractors, motor cars and vehicles principally designed for the transport of persons, vehicles for the transport of goods with compression-ignition internal combustion piston engine "diesel or semi-diesel engine" of a cylinder capacity <= 2500 cm or with spark-ignition internal piston engine of a cylinder capacity <Export17months published, 2023-03 to 2026-06
8708 10 10Bumpers and parts thereof, for the industrial assembly of motor cars and other motor vehicles principally designed for the transport of persons, vehicles for the transport of goods with compression-ignition internal combustion piston engine "diesel or semi-diesel engine" of a cylinder capacity <= 2.500 cm or with spark-ignition internal piston engine of a cylinder capacity <= 2.800 cm and speciaExport8months published, 2018-06 to 2025-05
8714 94 90Parts of brakes, incl. coaster braking hubs and hub-brakes, for cycles, n.e.s. (excl. for motorcycles)ImportExport8months published, 2021-06 to 2026-02
8708 91 35Radiators for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.91.20)ImportExport6months published, 2017-02 to 2025-11
8708 30 91Parts for disc brakes, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.30.10)ImportExport4months published, 2016-05 to 2026-05
8708 99 10Parts and accessories for the industrial assembly of: pedestrian-controlled tractors, motor cars and vehicles principally designed for the transport of persons, vehicles for the transport of goods with compression-ignition internal combustion piston engine "diesel or semi-diesel engine" <= 2500 cm or with spark-ignition internal piston engine <= 2800 cm , special purpose motor vehicles of headingExport4months published, 2019-11 to 2025-05
8714 10 90Parts and accessories of motorcycles, incl. mopeds, n.e.s. (excl. brakes, gear boxes, road wheels, silencers, exhaust pipes, clutches, and their parts)Export3months published, 2019-02 to 2026-01
8714 94 20Brakes, incl. coaster braking hubs and hub brakes, for cycles (excl. for motorcycles)Export3months published, 2026-03 to 2026-06
8708 10 90Bumpers and parts thereof for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.10.10)Export2months published, 2019-08 to 2020-12
8708 91 99Parts for radiators, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.91.20 and those of closed-die forged steel)Export2months published, 2025-12 to 2026-06
87Chapter-level link, no HMRC descriptionImport1months published, 2017-07 to 2017-07
8708 29 90Parts and accessories for the industrial assembly of bodies of: tractors, motor vehicles for the transport of >= 10 persons, motor cars and vehicles principally designed for the transport of persons, motor vehicles for the transport of goods, special purpose motor vehicles (excl. bumpers and parts thereof, safety seat belts, front windscreens "windshields", rear windows and other windows and partsExport1months published, 2024-10 to 2024-10
8708 92 20Silencers "mufflers" and exhaust pipes, and parts thereof, for the industrial assembly of: pedestrian-controlled tractors, motor cars and vehicles principally designed for the transport of persons, vehicles for the transport of goods with compression-ignition internal combustion piston engine "diesel or semi-diesel engine" <= 2500 cm or with spark-ignition internal piston engine <= 2800 cm , specExport1months published, 2016-02 to 2016-02
8708 93 90Clutches and parts thereof, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.93.10)Export1months published, 2017-08 to 2017-08
8708 95 91Safety airbags with inflator system and parts thereof, of closed-die forged steel, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. those for the industrial assembly of certain motor vehicles of subhExport1months published, 2016-02 to 2016-02
8708 99 93Parts and accessories of closed-die forged steel, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s.Export1months published, 2022-01 to 2022-01
months published, 2018-06 to 2020-04
3926 90 97Articles of plastics and articles of other materials of heading 3901 to 3914, n.e.s.ImportExport7months published, 2016-01 to 2025-01
3917 31 00Flexible tubes, pipes and hoses, of plastics, burst pressure >= 27,6 MPaImportExport5months published, 2021-02 to 2026-07
3917 10 10Artificial guts "sausage casings" of hardened proteinExport3months published, 2016-01 to 2020-04
Show the 11 sampled codesShow fewer codesexpand_moreexpand_less
3917 21 10Rigid tubes, pipes and hoses, of polymers of ethylene, seamless and of a length > the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise workedExport3months published, 2018-02 to 2018-12
3917 40 00Fittings, e.g. joints, elbows, flanges, of plastics, for tubes, pipes and hosesExport3months published, 2016-07 to 2017-04
3917 29 00Rigid tubes, pipes and hoses, of plastics (excl. those of polymers of ethylene, propylene and vinyl chloride)ImportExport2months published, 2023-09 to 2024-08
3917 39 00Flexible tubes, pipes and hoses, of plastics, reinforced or otherwise combined with other materials (excl. those with a burst pressure of >= 27,6 MPa)Import1months published, 2025-12 to 2025-12
3920 99 59Plates, sheets, film, foil and strip, of non-cellular addition polymerization products, n.e.s., not reinforced, laminated, supported or similarly combined with other materials, without backing, unworked or merely surface-worked or merely cut into squares or rectangles (excl. self-adhesive products, floor, wall and ceiling coverings of heading 3918, poly"vinyl fluoride" sheet, ion-exchange membraneExport1months published, 2021-01 to 2021-01
3923 90 00Articles for the conveyance or packaging of goods, of plastics (excl. boxes, cases, crates and similar articles; sacks and bags, incl. cones; carboys, bottles, flasks and similar articles; spools, spindles, bobbins and similar supports; stoppers, lids, caps and other closures)Import1months published, 2016-04 to 2016-04
3926 90 50Perforated buckets and similar articles used to filter water at the entrance to drains, of plasticsExport1months published, 2016-12 to 2016-12
15
months published, 2016-04 to 2025-03
4009 11 00Tubes, pipes and hoses, of vulcanised rubber (excl. hard rubber), not reinforced or otherwise combined with other materials, without fittingsExport9months published, 2016-10 to 2025-06
4009 22 00Tubes, pipes and hoses, of vulcanised rubber (excl. hard rubber), reinforced or otherwise combined only with metal, with fittingsImportExport4months published, 2016-12 to 2026-03
4009 12 00Tubes, pipes and hoses, of vulcanised rubber (excl. hard rubber), not reinforced or otherwise combined with other materials, with fittingsExport3months published, 2016-11 to 2020-07
Show the 11 sampled codesShow fewer codesexpand_moreexpand_less
4009 21 00Tubes, pipes and hoses, of vulcanised rubber (excl. hard rubber), reinforced or otherwise combined only with metal, without fittingsImport2months published, 2026-03 to 2026-06
4009 32 00Tubes, pipes and hoses, of vulcanised rubber (excl. hard rubber), reinforced or otherwise combined only with textile materials, with fittingsImportExport2months published, 2016-10 to 2018-08
4016 10 00Articles of cellular rubber, n.e.s.Export2months published, 2018-03 to 2019-02
4009 41 00Tubes, pipes and hoses, of vulcanised rubber (excl. hard rubber), reinforced or otherwise combined with materials other than metal or textile materials, without fittingsExport1months published, 2019-05 to 2019-05
4010 11 00Conveyor belts or belting, of vulcanised rubber, reinforced only with metalExport1months published, 2020-06 to 2020-06
4016 99 52Rubber-to-metal bonded parts of vulcanised rubber (excl. hard rubber), of a type intended exclusively or mainly for use in motor vehicles of heading 8701 to 8705 (excl. those of cellular rubber)Export1months published, 2018-06 to 2018-06
4016 99 97Articles of vulcanised rubber, n.e.s. (excl. hard rubber and those of cellular rubber)Export1months published, 2024-05 to 2024-05
months published, 2017-02 to 2017-02
8511 90 00Parts of electrical ignition or starting equipment, generators, etc. of heading 8511, n.e.s.Export1months published, 2021-01 to 2021-01
8522 90 80No description publishedExport1months published, 2019-10 to 2019-10
8536 10 10Fuses for a current <= 10 A, for a voltage <= 1.000 VExport1months published, 2020-05 to 2020-05
Show the 10 sampled codesShow fewer codesexpand_moreexpand_less
8536 49 00Relays for a voltage > 60 V but <= 1.000 VImport1months published, 2025-11 to 2025-11
8536 50 07Electromechanical snap-action switches for a current <= 11 A (excl. relays and automatic circuit breakers)Import1months published, 2025-03 to 2025-03
8536 50 80Switches for a voltage of > 60 V and <= 1.000 V (excl. relays, automatic circuit breakers, electronic AC switches consisting of optically coupled input and output circuits "insulated thyristor AC switches", electronic switches, incl. temperature protected electronic switches, consisting of a transistor and a logic chip [chip-on-chip technology] and electromechanical snap-action switches for a currImport1months published, 2023-12 to 2023-12
8538 10 00Boards, panels, consoles, desks, cabinets and other bases for the goods of heading 8537, not equipped with their apparatusExport1months published, 2018-05 to 2018-05
8545 11 00Electrodes of graphite or other carbon, for electric furnacesExport1months published, 2019-06 to 2019-06
8546 90 90Electrical insulators (excl. those of glass, ceramics or plastics and insulating fittings)Import1months published, 2020-10 to 2020-10
1
months published, 2024-07 to 2024-07
7218 99 80Semi-finished products of stainless steel, forged (excl. products of square or rectangular cross-section)Export1months published, 2017-03 to 2017-03
7222 11 11Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section of a diameter of >= 800 mm, containing by weight >= 2,5% nickelExport1months published, 2017-05 to 2017-05
7222 40 90Angles, shapes and sections of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s.Export1months published, 2017-03 to 2017-03
2
months published, 2020-06 to 2021-02
7415 10 00Nails, tacks, drawing pins, staples and similar articles, of copper or with shafts of iron or steel and heads of copper (excl. staples in strips)Export2months published, 2020-04 to 2020-10
7415 21 00Washers, "incl. spring washers and spring lock washers", of copperExport1months published, 2024-02 to 2024-02
7415 39 00Screw hooks, screw rings and the like, threaded, of copper (excl. standard screws and bolts and nuts)Export1months published, 2020-10 to 2020-10
months published, 2019-07 to 2020-05
9401 10 00Seats for aircraftExport1months published, 2018-10 to 2018-10
9401 30 00Swivel seats with variable height adjustments (excl. medical, surgical, dental or veterinary, and barbers' chairs)Export1months published, 2019-01 to 2019-01
9403 30 11Desks for offices, with wooden framesExport1months published, 2018-02 to 2018-02
21
months published, 2016-06 to 2026-07
7616 99 90Articles of aluminium, uncast, n.e.s.ImportExport3months published, 2016-09 to 2025-07
7602 00 90Scrap of aluminium (excl. slags, scale and the like from iron and steel production, containing recoverable aluminium in the form of silicates, ingots or other similar unwrought shapes, of remelted waste and scrap, of aluminium, and ashes and residues from aluminium production)Export1months published, 2016-10 to 2016-10
3
months published, 2018-09 to 2020-09
6813 81 00Brake linings and pads, with a basis of mineral substances or cellulose, whether or not combined with textile or other materials (excl. containing asbestos)Export2months published, 2020-06 to 2020-07
10
months published, 2016-01 to 2025-03
8305 10 00Fittings for loose-leaf binders or files, of base metal (excl. drawing pins and clasps for books or registers)Export1months published, 2019-03 to 2019-03
months published, 2020-06 to 2020-06
9032 10 80Thermostats (excl. electronic)Import1months published, 2024-08 to 2024-08
months published, 2025-08 to 2025-08
9207 90 10Guitars, the sound of which is produced, or must be amplified, electricallyExport1months published, 2016-06 to 2016-06
months published, 2024-02 to 2024-11
months published, 2024-12 to 2026-03
1
months published, 2021-01 to 2021-01
HOSE SOLUTIONS LTD · Tradaro
On the same codes
Traders published against the most of the same codes. A shared code is a shared commodity, not a relationship between them.
UK traderHMRC trader directoryref 208010