Published trader · United Kingdom
BARCLAY & MATHIESON LTD
ImporterExporterDirectory snapshot: 2026-09-12. Address observation date, not a trade date.
HMRC trader directory · ref 23147 · published 2026-07 to 2026-07
36Commodity codes
1Months published
38Published links
2026-07First published
2026-07Last published
Months published
Commodity codes HMRC published this trader against, month by month, within the loaded coverage. A gap is a month with no published link in that coverage, not a month without trade.
2026-072026-07
Commodity codes on the record
Codes in the loaded coverage this trader is published against, most months first. Descriptions are HMRC’s own, verbatim. This list is bounded; codes outside the loaded coverage are not listed.
| Commodity code | Description (as published) | Direction | Months | Window |
|---|---|---|---|---|
| 3921 90 90 | Plates, sheets, film, foil and strip, of plastics, reinforced, laminated, supported or similarly combined with other materials, unworked or merely surface-worked or merely cut into squares or rectangles (excl. of cellular plastic, addition polymerization products, condensation polymerization products and rearrangement polymerization products; self-adhesive products and floor, wall and ceiling cove | ImporterExporter | 1 | 2026-07 – 2026-07 |
| 6903 10 00 | Retorts, crucibles, mufflers, nozzles, plugs, supports, cupels, tubes, pipes, sheaths, rods, slide gates and other refractory ceramic goods, containing by weight > 50% free carbon (excl. refractory bricks, blocks, tiles and similar refractory ceramic constructional goods) | Importer | 1 | 2026-07 – 2026-07 |
| 72 | HS chapter: HMRC publishes no description for a chapter-level link | Importer | 1 | 2026-07 – 2026-07 |
| 7208 51 20 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 15 mm, without patterns in relief | Importer | 1 | 2026-07 – 2026-07 |
| 7208 51 91 | Flat-rolled products of iron or non-alloy steel, of a width of >= 2.050 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 10 mm but <= 15 mm, without patterns in relief (excl. "wide flats") | Importer | 1 | 2026-07 – 2026-07 |
| 7208 51 98 | Flat-rolled products of iron or non-alloy steel, of a width of < 2.050 mm but >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 10 mm but <= 15 mm, without patterns in relief | Importer | 1 | 2026-07 – 2026-07 |
| 7208 52 91 | Flat-rolled products of iron or non-alloy steel, of a width of >= 2.050 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief | Importer | 1 | 2026-07 – 2026-07 |
| 7214 91 10 | Bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight < 0,25% of carbon, of rectangular "other than square" cross-section (excl. those with indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling, and free-cutting steel) | Importer | 1 | 2026-07 – 2026-07 |
| 7214 99 31 | Bars and rods of iron or non-alloy steel, only hot-rolled, hot-drawn or hot-extruded, containing < 0,25% of carbon, of circular cross-section, of a maximum diameter of >= 80 mm (other than of free-cutting steel, smooth bars and rods, for reinfoced concrete, or bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process, or wound after rolling) | Importer | 1 | 2026-07 – 2026-07 |
| 7214 99 39 | Bars and rods of iron or non-alloy steel, only hot-rolled, hot-drawn or hot-extruded, containing < 0,25% of carbon, of circular cross-section of a maximum diameter of < 80 mm (other than of free-cutting steel, smooth bars and rods, for reinforced concrete, or bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process, or wound after rolling) | Importer | 1 | 2026-07 – 2026-07 |
| 7214 99 50 | Bars and rods of iron or non-alloy steel, only hot-rolled, hot-drawn or hot-extruded, containing by weight < 0,25% of carbon, of square cross-section or of a cross-section other than square or circular (other than of free-cutting steel, smooth bars and rods, for reinforced concrete, or bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process, o | Importer | 1 | 2026-07 – 2026-07 |
| 7216 21 00 | L sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of < 80 mm | Importer | 1 | 2026-07 – 2026-07 |
| 7216 31 10 | U sections of iron or non-alloy steel, simply hot-rolled, hot-drawn or extruded, of a height >= 80 mm but <= 220 mm | Importer | 1 | 2026-07 – 2026-07 |
| 7216 31 90 | U sections of iron or non-alloy steel, simply hot-rolled, hot-drawn or extruded, of a height > 220 mm | Importer | 1 | 2026-07 – 2026-07 |
| 7216 32 11 | I sections with parallel flange faces, of iron or non-alloy steel, simply hot-rolled, hot-drawn or extruded, of a height >= 80 mm but <= 220 mm | Importer | 1 | 2026-07 – 2026-07 |
| 7216 32 91 | I sections with parallel flange faces, of iron or non-alloy steel, simply hot-rolled, hot-drawn or extruded, of a height > 220 mm | Importer | 1 | 2026-07 – 2026-07 |
| 7216 33 10 | H sections of iron or non-alloy steel, simply hot-rolled, hot-drawn or extruded, of a height >= 80 mm but <= 180 mm | ImporterExporter | 1 | 2026-07 – 2026-07 |
| 7216 33 90 | H sections of iron or non-alloy steel, simply hot-rolled, hot-drawn or extruded, of a height > 180 mm | Importer | 1 | 2026-07 – 2026-07 |
| 7216 40 10 | L sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of >= 80 mm | Importer | 1 | 2026-07 – 2026-07 |
| 7216 50 91 | Bulb sections "bulb flat", only hot-rolled, hot-drawn or hot-extruded | Importer | 1 | 2026-07 – 2026-07 |
| 7216 61 90 | Angles, shapes and sections (other than c, l, u, z, omega or open-ended sections) of iron or non-alloy steel, simply cold-formed or cold-finished, obtained from flat-rolled products | Importer | 1 | 2026-07 – 2026-07 |
| 7222 40 50 | Angles, shapes and sections of stainless steel, not further worked than cold-formed or cold-finished | Importer | 1 | 2026-07 – 2026-07 |
| 7226 91 91 | Flat-rolled products of alloy steel other than stainless steel, simply hot-rolled, of a thickness of >= 4,75 mm, of a width of < 600 mm (excl. of tool steel, silicon-electrical steel or high speed steel) | Importer | 1 | 2026-07 – 2026-07 |
| 7228 30 69 | Bars and rods or alloy steel other than stainless steel, only hot-rolled, hot-drawn or hot-extruded, of circular cross-section, of a diameter of < 80 mm (other than of high-speed steel, silico-manganese steel, tool steel and articles of subheading 7228.30.49 and excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) | Importer | 1 | 2026-07 – 2026-07 |
| 7228 70 10 | Angles, shapes and sections of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded | Importer | 1 | 2026-07 – 2026-07 |
| 7304 19 10 | Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel, of an external diameter of <= 168,3 mm (excl. products of stainless steel or of cast iron) | Importer | 1 | 2026-07 – 2026-07 |
| 7304 19 30 | Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. products of stainless steel or of cast iron) | Importer | 1 | 2026-07 – 2026-07 |
| 7304 19 90 | Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel, of an external diameter of > 406,4 mm (excl. products of stainless steel or of cast iron) | Importer | 1 | 2026-07 – 2026-07 |
| 7306 30 77 | Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel of an external diameter of <= 168,3 mm (excl. plated or coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe") | Importer | 1 | 2026-07 – 2026-07 |
| 7306 40 80 | Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excl. products cold-drawn or cold-rolled "cold-reduced", tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) | Importer | 1 | 2026-07 – 2026-07 |
| 7306 69 90 | Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel other than stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or | Importer | 1 | 2026-07 – 2026-07 |
| 7308 90 98 | Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet) | Importer | 1 | 2026-07 – 2026-07 |
| 7604 10 90 | Profiles of non-alloy aluminium, n.e.s. | Importer | 1 | 2026-07 – 2026-07 |
| 8301 60 00 | Parts of padlocks, locks, clasps and frames with clasps, incorporating locks, of base metal, n.e.s. | Importer | 1 | 2026-07 – 2026-07 |
| 8302 41 10 | Base metal mountings and fittings suitable for doors (excl. locks with keys and hinges) | Importer | 1 | 2026-07 – 2026-07 |
| 8302 41 90 | Base metal mountings and fittings suitable for buildings (excl. for doors, windows and French windows and locks with keys and hinges) | Importer | 1 | 2026-07 – 2026-07 |