Published trader · United Kingdom

JACK SEALEY LIMITED

ImporterExporter

Directory snapshot: 2026-09-12. Address observation date, not a trade date.

HMRC trader directory · ref 252845 · published 2026-07 to 2026-07

139Commodity codes
1Months published
174Published links
2026-07First published
2026-07Last published

Months published

Commodity codes HMRC published this trader against, month by month, within the loaded coverage. A gap is a month with no published link in that coverage, not a month without trade.

2026-072026-07

Commodity codes on the record

Codes in the loaded coverage this trader is published against, most months first. Descriptions are HMRC’s own, verbatim. This list is bounded; codes outside the loaded coverage are not listed.

Commodity codeDescription (as published)DirectionMonthsWindow
26HS chapter: HMRC publishes no description for a chapter-level linkExporter12026-07 – 2026-07
3006 50 00First-aid boxes and kitsExporter12026-07 – 2026-07
3902 10 00Polypropylene, in primary formsImporter12026-07 – 2026-07
3917 33 00Flexible tubes, pipes and hoses of plastics, not reinforced or otherwise combined with other materials, with fittings, seals or connectorsImporter12026-07 – 2026-07
3918 10 90Floor coverings of polymers of vinyl chloride, whether or not self-adhesive, in rolls or in the form of tiles (excl. those on a backing coated, impregnated or covered with poly"vinyl chloride")Importer12026-07 – 2026-07
3918 90 00Floor coverings of plastics, whether or not self-adhesive, in rolls or in the form of tiles, and wall or ceiling coverings in rolls with a width of >= 45 cm, consisting of a layer of plastics fixed permanently on a backing of any material other than paper, the face side of which is grained, embossed, coloured, design-printed or otherwise decorated (excl. coverings of polymers of vinyl chloride)Importer12026-07 – 2026-07
3919 10 80Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, in rolls <= 20 cm wide (excl. plastic strips coated with unvulcanised natural or synthetic rubber)Importer12026-07 – 2026-07
3920 99 90Plates, sheets, film, foil and strip, of non-cellular plastics, n.e.s., not reinforced, laminated, supported or similarly combined with other materials, without backing, unworked or merely surface-worked or merely cut into squares or rectangles (excl. self-adhesive products, those of addition polymerization, condensation and rearrangement polymerization products, floor, wall and ceiling coveringsImporter12026-07 – 2026-07
3921 90 90Plates, sheets, film, foil and strip, of plastics, reinforced, laminated, supported or similarly combined with other materials, unworked or merely surface-worked or merely cut into squares or rectangles (excl. of cellular plastic, addition polymerization products, condensation polymerization products and rearrangement polymerization products; self-adhesive products and floor, wall and ceiling coveImporter12026-07 – 2026-07
3923 30 90Carboys, bottles, flasks and similar articles for the conveyance or packaging of goods, of plastics, with a capacity of > 2 lImporter12026-07 – 2026-07
3923 90 00Articles for the conveyance or packaging of goods, of plastics (excl. boxes, cases, crates and similar articles; sacks and bags, incl. cones; carboys, bottles, flasks and similar articles; spools, spindles, bobbins and similar supports; stoppers, lids, caps and other closures)ImporterExporter12026-07 – 2026-07
3926 90 60Protective face shields/visors of plasticsImporter12026-07 – 2026-07
3926 90 97Articles of plastics and articles of other materials of heading 3901 to 3914, n.e.s.ImporterExporter12026-07 – 2026-07
4009 12 00Tubes, pipes and hoses, of vulcanised rubber (excl. hard rubber), not reinforced or otherwise combined with other materials, with fittingsExporter12026-07 – 2026-07
4009 42 00Tubes, pipes and hoses, of vulcanised rubber (excl. hard rubber), reinforced or otherwise combined with materials other than metal or textile materials, with fittingsImporterExporter12026-07 – 2026-07
4017 00 00Hard rubber, e.g. ebonite, in all forms, incl. waste and scrap; articles of hard rubber, n.e.s.Importer12026-07 – 2026-07
6307 10 30Floorcloths, dishcloths, dusters and similar cleaning cloths, of nonwovensExporter12026-07 – 2026-07
6307 10 90Floorcloths, dishcloths, dusters and similar cleaning cloths, of all types of textile materials (excl. knitted or crocheted and nonwovens)Importer12026-07 – 2026-07
6506 10 80Safety headgear, whether or not lined or trimmed (other than of plastics)Exporter12026-07 – 2026-07
6805 10 00Natural or artificial abrasive powder or grain, on a base of woven textile fabric only, whether or not cut to shape, sewn or otherwise made upExporter12026-07 – 2026-07
7307 29 80Tube or pipe fittings of stainless steel (excl. cast, threaded, butt welding fittings and flanges)Importer12026-07 – 2026-07
7310 10 00Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material, of a capacity of >= 50 l but <= 300 l, n.e.s. (excl. containers for compressed or liquefied gas, or containers fitted with mechanical or thermal equipment)ImporterExporter12026-07 – 2026-07
7310 29 90Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material, of a capacity of < 50 l and of a wall thickness of >= 0,5 mm, n.e.s. (excl. containers for compressed or liquefied gas, or containers fitted with mechanical or thermal equipment, and cans which are to be closed by soldering or crimping)Importer12026-07 – 2026-07
7318 23 00Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses)Importer12026-07 – 2026-07
7322 90 00Air heaters and hot-air distributors, incl. distributors which can also distribute fresh or conditioned air, non-electrically heated, incorporating a motor-driven fan or blower, and parts thereof, of iron or steelImporter12026-07 – 2026-07
7325 99 90Articles of cast steel, n.e.s. (excl. grinding balls and similar articles for mills)Importer12026-07 – 2026-07
7326 90 98Articles of iron or steel, n.e.s.Importer12026-07 – 2026-07
7616 10 00Nails, tacks, staples, screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles, of aluminium (excl. staples in strips, plugs, bungs and the like, threaded)Importer12026-07 – 2026-07
7616 99 90Articles of aluminium, uncast, n.e.s.Importer12026-07 – 2026-07
8201 10 00Spades and shovels, with working parts of base metalImporter12026-07 – 2026-07
8201 90 00Scythes, sickles, hay knives, timber wedges and other hand tools of a kind used in agriculture, horticulture or forestry, with working parts of base metal (excl. spades, shovels, mattocks, picks, hoes, rakes, axes, billhooks and similar hewing tools, poultry shears, secateurs and similar one-handed pruners and shears, hedge shears, two-handed pruning shears and similar two-handed shears)Importer12026-07 – 2026-07
8203 20 00Pliers, incl. cutting pliers, pincers and tweezers for non-medical use and similar hand tools, of base metalImporterExporter12026-07 – 2026-07
8203 40 00Pipe-cutters, bolt croppers, perforating punches and similar hand tools, of base metalImporter12026-07 – 2026-07
8204 11 00Hand-operated spanners and wrenches, incl. torque meter wrenches, of base metal, non-adjustableImporterExporter12026-07 – 2026-07
8204 12 00Hand-operated spanners and wrenches, incl. torque meter wrenches, of base metal, adjustable (excl. tap wrenches)Exporter12026-07 – 2026-07
8204 20 00Interchangeable spanner sockets, with or without handles, of base metalImporterExporter12026-07 – 2026-07
8205 10 00Hand-operated drilling, threading or tapping hand toolsImporterExporter12026-07 – 2026-07
8205 20 00Hammers and sledge hammers with working parts of base metalImporterExporter12026-07 – 2026-07
8205 30 00Planes, chisels, gouges and similar cutting tools for working woodImporter12026-07 – 2026-07
8205 40 00Hand-operated screwdriversImporterExporter12026-07 – 2026-07
8205 59 80Hand tools, incl. glaziers' diamonds, of base metal, n.e.s.ImporterExporter12026-07 – 2026-07
8205 70 00Vices, clamps and the like (excl. accessories for and parts of machine tools or water-jet cutting machines)ImporterExporter12026-07 – 2026-07
8207 19 90Rock-drilling or earth-boring tools, interchangeable, with working parts of materials other than sintered metal carbide, cermets, diamond or agglomerated diamondImporter12026-07 – 2026-07
8207 30 10Interchangeable tools for pressing, stamping or punching, for working metalImporter12026-07 – 2026-07
8302 30 00Base metal mountings, fittings and similar articles suitable for motor vehicles (excl. hinges and castors)Importer12026-07 – 2026-07
8302 49 00Base metal mountings, fittings and similar articles (excl. locks with keys, clasps and frames with clasps incorporating locks, hinges, castors and mountings and fittings suitable for buildings, motor vehicles or furniture)Importer12026-07 – 2026-07
8304 00 00Filing cabinets, card-index cabinets, paper trays, paper rests, pen trays, office-stamp stands and similar office or desk equipment, of base metal (excl. office furniture of heading 9403 and waste paper bins)Importer12026-07 – 2026-07
8311 10 00Coated electrodes of base metal, for electric arc-weldingImporter12026-07 – 2026-07
8413 20 00Hand pumps for liquids (excl. those of subheading 8413.11 and 8413.19)ImporterExporter12026-07 – 2026-07
8413 81 00Pumps for liquids, power-driven (excl. those of subheading 8413.11 and 8413.19, fuel, lubricating or cooling medium pumps for internal combustion piston engine, concrete pumps, general reciprocating or rotary positive displacement pumps and centrifugal pumps of all kinds)ImporterExporter12026-07 – 2026-07
8413 91 00Parts of pumps for liquids, n.e.s.ImporterExporter12026-07 – 2026-07
8414 40 10Air compressors mounted on a wheeled chassis for towing, giving a flow per minute <= 2 mImporter12026-07 – 2026-07
8414 40 90Air compressors mounted on a wheeled chassis for towing, giving a flow per minute > 2 mImporter12026-07 – 2026-07
8414 59 25Axial fans (excl. table, floor, wall, window, ceiling or roof fans, with a self-contained electric motor of an output <= 125 W, and fans for cooling IT equipment of 8414 59 15)Exporter12026-07 – 2026-07
8414 59 95Fans (excl. table, floor, wall, window, ceiling or roof fans, with a self-contained electric motor of an output <= 125 W, axial and centrifugal fans, and fans for cooling IT equipment of 8414 59 15)ImporterExporter12026-07 – 2026-07
8414 60 00Hoods incorporating a fan, whether or not fitted with filters, having a maximum horizontal side <= 120 cmImporter12026-07 – 2026-07
8414 80 22Reciprocating displacement compressors, having a gauge pressure capacity <= 15 bar, giving a flow/h <= 60 m (excl. compressors for refrigerating equipment and air compressors mounted on a wheeled chassis for towing)Importer12026-07 – 2026-07
8414 80 80Air pumps and ventilating or recycling hoods incorporating a fan, whether or not fitted with filters, with a maximum horizontal side > 120 cm (excl. vacuum pumps, hand- or foot-operated air pumps, compressors and gas-tight biological safety cabinets)ImporterExporter12026-07 – 2026-07
8415 10 10Air conditioning machines designed to be fixed to a window, wall, ceiling or floor, self-containedImporterExporter12026-07 – 2026-07
8415 82 00Air conditioning machines incorporating a refrigerating unit but without a valve for reversal of the cooling-heat cycle (excl. of a kind used for persons in motor vehicles, and self-contained or "split-system" window or wall air conditioning machines)Exporter12026-07 – 2026-07
8416 10 10Furnace burners for liquid fuel, incorporating an automatic control deviceImporter12026-07 – 2026-07
8416 20 10Furnace burners, only for gas, monobloc, incorporating a ventilator and a control deviceImporter12026-07 – 2026-07
8416 20 80Furnace burners for pulverised solid fuel or gas (excl. such products only for gas, monobloc, incorporating a ventilator and a control device and combination burners)Importer12026-07 – 2026-07
8416 90 00Parts of furnace burners such as mechanical stokers, incl. their mechanical grates, mechanical ash dischargers and similar appliances, n.e.s.Importer12026-07 – 2026-07
8418 21 91Household refrigerators compression-type, of a capacity <= 250 l (excl. table models and building-in types)Importer12026-07 – 2026-07
8418 29 00Household refrigerators, absorption-typeImporter12026-07 – 2026-07
8418 40 80Freezers of the upright type, of a capacity > 250 l but <= 900 lImporter12026-07 – 2026-07
8418 69 00Refrigerating or freezing equipment (excl. refrigerating and freezing furniture)Importer12026-07 – 2026-07
8421 19 70Centrifuges, incl. centrifugal dryers (excl. apparatus for isotope separation, cream separators, clothes-dryers, and centrifuges of a kind used in laboratories and in the manufacture of semiconductor wafers)Importer12026-07 – 2026-07
8421 23 00Oil or petrol-filters for internal combustion enginesImporter12026-07 – 2026-07
8424 20 00Spray guns and similar appliances (other than electrical machines, appliances and other devices for spraying molten metals or metal carbides of heading 8515, sand blasting machines and similar jet projecting machines)ImporterExporter12026-07 – 2026-07
8424 30 01Water cleaning appliances with built-in motor, with heating deviceExporter12026-07 – 2026-07
8424 30 08Water cleaning appliances with built-in motor, without heating deviceImporter12026-07 – 2026-07
8424 90 80Parts of fire extinguishers, spray guns and similar appliances, steam or sand blasting machines and similar jet projecting machines and machinery and apparatus for projecting, dispersing or spraying liquids or powders, n.e.s.Importer12026-07 – 2026-07
8425 41 00Built-in jacking systems of a type used in garagesImporterExporter12026-07 – 2026-07
8425 42 00Jacks and hoists, hydraulic (excl. built-in jacking systems used in garages)ImporterExporter12026-07 – 2026-07
8425 49 00Jacks and hoists of a kind used for raising vehicles, not hydraulicImporterExporter12026-07 – 2026-07
8426 19 00Overhead travelling cranes, transporter cranes, gantry cranes, bridge cranes and mobile lifting frames (excl. overhead travelling cranes on fixed support, mobile lifting frames on tyres, straddle carriers and portal or pedestal jib cranes)Importer12026-07 – 2026-07
8426 99 00Ships' derricks; cranes, incl. cable cranes (excl. overhead travelling cranes, transporter cranes, gantry cranes, portal or pedestal jib cranes, bridge cranes, mobile lifting frames and straddle carriers, tower cranes, works trucks fitted with a crane, mobile cranes and cranes designed for mounting on road vehicles)Importer12026-07 – 2026-07
8427 90 00Works trucks fitted with lifting or handling equipment, not self-propelledImporterExporter12026-07 – 2026-07
8428 10 80Lifts and skip hoists, non-electrically operatedImporter12026-07 – 2026-07
8428 90 90Lifting, handling, loading or unloading machinery, n.e.s.Importer12026-07 – 2026-07
8431 10 00Parts of pulley tackles and hoists (other than skip hoists), winches, capstans and jacks, n.e.s.Importer12026-07 – 2026-07
8459 29 00Drilling machines for working metal, not numerically controlled (excl. way-type unit head machines and hand-operated machines)Importer12026-07 – 2026-07
8460 39 00Sharpening "tool or cutter grinding" machines, not numerically controlledImporterExporter12026-07 – 2026-07
8461 50 19Sawing machines for working metals, metal carbides or cermets (excl. machines for working in the hand and circular saws)ImporterExporter12026-07 – 2026-07
8462 22 90Profile forming machines, for flat products (excl. numerically controlled)ImporterExporter12026-07 – 2026-07
8462 59 00Machines for working tube, pipe, hollow section and bar (excl. presses, and numerically controlled)Importer12026-07 – 2026-07
8462 61 90Hydraulic cold metal working presses (excl. numerically controlled)Importer12026-07 – 2026-07
8465 91 10Bandsaws for working wood, cork, bone, hard rubber, hard plastics or similar hard materials (excl. machines for working in the hand)Importer12026-07 – 2026-07
8465 92 00Planing, milling or moulding -by cutting- machines, for working wood, cork, bone, hard rubber, hard plastics or similar hard materials (excl. machines for working in the hand and machines of subheadings 8465.10 and 8465.20)Importer12026-07 – 2026-07
8466 10 38Tool holders for machine tools, incl. tool holders for any type of tool for working in the hand (excl. tool holders for lathes, arbors, collets and sleeves)Importer12026-07 – 2026-07
8467 19 00Pneumatic tools for working in the hand, non-rotary typeImporterExporter12026-07 – 2026-07
8467 92 00Parts of pneumatic tools for working in the hand, n.e.s.Importer12026-07 – 2026-07
8467 99 00Parts of pneumatic tools for working in the hand, hydraulic or with self-contained electric or non-electric motor, n.e.s.Importer12026-07 – 2026-07
8468 10 00Hand-held blow pipes, gas-operated, for soldering, brazing or weldingImporter12026-07 – 2026-07
8468 20 00Gas-operated machinery and apparatus for soldering, brazing, welding or surface tempering (excl. hand-held blow pipes)Importer12026-07 – 2026-07
8479 89 97Machines, apparatus and mechanical appliances, n.e.s.Exporter12026-07 – 2026-07
8481 80 39Central heating radiator valves (excl. thermostatic valves)Importer12026-07 – 2026-07
8504 40 60Accumulator chargers (excl. polycrystalline semiconductor rectifiers)Importer12026-07 – 2026-07
8504 40 95Static converters (excl. accumulator chargers, rectifiers, and inverters)Importer12026-07 – 2026-07
8504 90 17Parts of transformers and inductors, n.e.s. (excl. ferrite cores and steel laminations and cores)Importer12026-07 – 2026-07
8505 19 90Permanent magnets and articles intended to become permanent magnets after magnetization, of materials other than metal or agglomerated ferriteImporter12026-07 – 2026-07
8507 60 00Lithium-ion accumulators (excl. spent)Exporter12026-07 – 2026-07
8508 11 00Vacuum cleaners, incl. dry cleaners and wet vacuum cleaners, with self-contained electric motor, power <= 1 500 W and having a dust bag or other receptacle capacity <= 20 lExporter12026-07 – 2026-07
8513 10 00Portable electrical lamps designed to function by their own source of energyImporter12026-07 – 2026-07
8515 29 00Machines for resistance welding of metals, neither fully nor partly automaticExporter12026-07 – 2026-07
8516 29 91Electric space-heating and soil-heating apparatus, with built-in fan (excl. storage heating radiators)Importer12026-07 – 2026-07
8516 29 99Electric space-heating and soil-heating apparatus, without built-in fan (excl. convection heaters and liquid-filled radiators)Importer12026-07 – 2026-07
8516 60 10Electric cookers incorporating at least an oven and a hob, for domestic useImporter12026-07 – 2026-07
8516 60 50Electric cooking plates, boiling rings and hobs, for domestic useImporter12026-07 – 2026-07
8516 80 80Electric heating resistors (excl. electric heating resistors assembled with an insulated former of agglomerated carbon or graphite)ImporterExporter12026-07 – 2026-07
8536 69 90Plugs and sockets for a voltage of <= 1.000 V (excl. those for coaxial cables and printed circuits)Importer12026-07 – 2026-07
8536 90 40Battery clamps of a kind used for motor vehicles of heading 8702, 8703, 8704, or 8711Importer12026-07 – 2026-07
8539 52 00Light-emitting diode "LED" lampsImporterExporter12026-07 – 2026-07
8544 42 90Electric conductors, for a voltage <= 1.000 V, insulated, fitted with connectors, n.e.s. (other than of a kind used for telecommunications)ImporterExporter12026-07 – 2026-07
8544 49 95Electric conductors for a voltage > 80 V but < 1.000 V, insulated, not fitted with connectors, n.e.s. (excl. winding wire, coaxial conductors, wiring sets for vehicles, aircraft or ships, and wire and cables with individual conductor wires of a diameter > 0,51 mm)Importer12026-07 – 2026-07
8708 80 35Suspension shock-absorbers for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.80.20)Importer12026-07 – 2026-07
8716 80 00Vehicles pushed or drawn by hand and other vehicles not mechanically propelled (excl. trailers and semi-trailers)Importer12026-07 – 2026-07
9017 30 00Micrometers, callipers and gauges (excl. gauges without adjustable devices of subheading 9031.80)ImporterExporter12026-07 – 2026-07
9025 19 00Thermometers and pyrometers, not combined with other instruments (excl. liquid-filled thermometers for direct reading)ImporterExporter12026-07 – 2026-07
9026 20 80Instruments and apparatus for measuring or checking pressure of liquids or gases, non-electronic (excl. spiral or metal diaphragm type pressure gauges, and regulators)ImporterExporter12026-07 – 2026-07
9027 89 90Instruments and apparatus for physical or chemical analysis or for determining surface tension or the like, or for measuring heat or sound, n.e.s.Importer12026-07 – 2026-07
9028 20 00Liquid meters, incl. calibrating meters thereforImporter12026-07 – 2026-07
9030 31 00Multimeters for voltage, current, resistance or electrical power, without recording deviceImporter12026-07 – 2026-07
9030 33 70Instruments and apparatus for measuring or checking voltage, current or electrical power, without recording device (excl. multimeters, oscilloscopes and oscillographs)Importer12026-07 – 2026-07
9030 39 00Instruments and apparatus for measuring or checking voltage, current, resistance or electrical power, with recording device (excl. multimeters, and oscilloscopes and oscillographs)Importer12026-07 – 2026-07
9030 90 00Parts and accessories for instruments and apparatus for measuring or checking electrical quantities or for detecting ionising radiations, n.e.s.Importer12026-07 – 2026-07
9031 49 90Optical instruments, appliances and machines for measuring or checking, not elsewhere specified or included in chapter 90Importer12026-07 – 2026-07
9031 80 80Non-optical instruments, appliances and machines for measuring or checking, n.e.s. in Ch 90Importer12026-07 – 2026-07
9401 71 00Upholstered seats, with metal frames (excl. seats for aircraft or motor vehicles, swivel seats with variable height adjustments and medical, dental or surgical furniture)Importer12026-07 – 2026-07
9403 10 51Office desks, with metal framesExporter12026-07 – 2026-07
9403 10 58Metal furniture for offices, of <= 80 cm in height (excl. desks, and tables with special fittings for drafting of heading 9017)Importer12026-07 – 2026-07
9403 10 98Metal furniture for offices, of > 80 cm in height (excl. tables with special fittings for drawing of heading 9017, cupboards with doors, shutters or flaps, and seats)Importer12026-07 – 2026-07
9403 20 80Metal furniture (excl. for offices, medical, surgical, dental or veterinary furniture, beds and seats)ImporterExporter12026-07 – 2026-07
9403 70 00Furniture of plastics (excl. medical, dental, surgical or veterinary, and seats)ImporterExporter12026-07 – 2026-07
9403 99 10Parts of furniture, of metal, n.e.s. (excl. of seats or medical, surgical, dental or veterinary furniture)Importer12026-07 – 2026-07
9603 90 91Road-sweeping brushes; household type brooms and brushes, incl. shoe brushes and clothes brushes; brushes for grooming animals (excl. brushes constituting parts of machines, appliances or vehicles, and brooms or brushes consisting of twigs or other vegetable materials)Exporter12026-07 – 2026-07
9603 90 99Mops and leather dusters; prepared knots and tufts for broom or brush making; squeegees of rubber or similar flexible materials; brooms and brushes, n.e.s.Exporter12026-07 – 2026-07