A filled cell is a month with at least one published link in the loaded scope. A gap is a month with no published link, not a month without trade.
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
Published in 21 months between 2016-01 and 2026-07. Each published month is listed with its commodity code count in the table above.
at least one published link
no published link in this month
outside the loaded window
swap_horizPublished as both an importer and an exporter, against 9 commodity codes in chapter 39 and chapter 76.
event_busyPublished in 21 of the 25 months from January 2016 to January 2018. A missing month is one with no published link, not a month without trade.
inventory_2Concentrated in chapter 39: 7 of the 9 loaded codes are in chapter 39.
south_westThe chapter 39 codes are import only.
What it trades
Grouped by tariff chapter, most published codes first. Descriptions are HMRC’s own, verbatim. This list is bounded: codes outside the loaded coverage are not listed.
inventory_2Chapter 39Published 2016-01 to 2018-017of 9 loaded codes78%
3921 19 00Plates, sheets, film, foil and strip, of cellular plastic, unworked or merely surface-worked or merely cut into squares or rectangles (excl.those of polymers of styrene, vinyl chloride, polyurethanes and regenerated cellulose, self-adhesive products, floor, wall and ceiling coverings of heading 3918 and sterile surgical or dental adhesion barriers of subheading 3006.10.30)Import10months published, 2016-04 to 2018-01
3923 21 00Sacks and bags, incl. cones, of polymers of ethyleneImport10months published, 2016-01 to 2016-11
3919 10 80Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, in rolls <= 20 cm wide (excl. plastic strips coated with unvulcanised natural or synthetic rubber)Import4months published, 2016-05 to 2017-01
3920 10 40Plates, sheets, film, foil and strip, of non-cellular polymers of ethylene, not reinforced, laminated, supported or similarly combined with other materials, unworked or not further worked than surface-worked or only cut to square or rectangular shapes, of a thickness of <= 0,125 mm (other than self-adhesive, and wall and ceiling coverings of heading 3918)Import2months published, 2016-02 to 2016-05
Show the 7 sampled codesShow fewer codesexpand_moreexpand_less
3920 10 89Plates, sheets, film, foil, tape, strip, of unexpanded polymers of ethylene, not reinforced and non-cellular "laminated" or supported or similarly combined with other materials, unworked or not further worked than surface-worked or only cut to square or rectangular shapes, with a thickness of > 0,125 mm (other than self-adhesive and floor, wall and ceiling coverings of heading 3918, and syntheticImport2months published, 2016-06 to 2016-08
Stretch film of non-cellular polyethylene, not printed, of a thickness of <= 0,125 mm and of a specific gravity of < 0,94
Import
1months published, 2016-04 to 2016-04
3920 20 29Plates, sheets, film, foil and strip, of non-cellular polymers of propylene, not reinforced, laminated, supported or similarly combined with other materials, not further worked or only surface-worked and not cut to shapes other than rectangular "incl. square" of a thickness of <= 0,10 mm, not biaxially orientedImport1months published, 2016-06 to 2016-06
months published, 2016-01 to 2016-01
7612 90 80Casks, drums, cans, boxes and similar containers <= 300 l, of aluminium, for any material (other than compressed or liquefied gas), n.e.s. (other than collapsible tubular containers, containers for aerosols and containers manufactured from foil of a thickness <= 0,2 mmExport1months published, 2016-01 to 2016-01
PLASTNIR UK LTD · Tradaro
On the same codes
Traders published against the most of the same codes. A shared code is a shared commodity, not a relationship between them.