A filled cell is a month with at least one published link in the loaded scope. A gap is a month with no published link, not a month without trade.
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
Published in 68 months between 2016-01 and 2026-07. The months are listed with their commodity codes in the table above.
at least one published link
no published link in this month
outside the loaded window
swap_horizPublished as both an importer and an exporter, against 66 commodity codes across 11 tariff chapters.
event_busyPublished in 68 of the 117 months from November 2016 to July 2026. A missing month is one with no published link, not a month without trade.
inventory_2Concentrated in chapter 72: 39 of the 66 loaded codes are in chapter 72.
north_eastThe chapter 76 codes are export only.
What it trades
Grouped by tariff chapter, most published codes first. Descriptions are HMRC’s own, verbatim. This list is bounded: codes outside the loaded coverage are not listed.
inventory_2Chapter 72Published 2016-11 to 2026-0639of 66 loaded codes59%
72Chapter-level link, no HMRC descriptionImportExport11months published, 2022-07 to 2025-11
7225 40 40Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm (excl. products of tool steel, high-speed steel or silicon-electrical steel)Import7months published, 2024-03 to 2025-10
7218 99 19Semi-finished products of stainless steel, of square cross-section, forgedImport6months published, 2023-03 to 2026-06
7228 30 69Bars and rods or alloy steel other than stainless steel, only hot-rolled, hot-drawn or hot-extruded, of circular cross-section, of a diameter of < 80 mm (other than of high-speed steel, silico-manganese steel, tool steel and articles of subheading 7228.30.49 and excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)ImportExport6months published, 2022-08 to 2026-06
Show the 39 sampled codesShow fewer codesexpand_moreexpand_less
7222 19 10Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, containing by weight >= 2,5% nickel (excl. such products of circular cross-section)ImportExport5months published, 2023-01 to 2025-07
7222 11 11Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section of a diameter of >= 800 mm, containing by weight >= 2,5% nickel
inventory_2Chapter 84Published 2023-01 to 2026-067of 66 loaded codes11%
8454 90 00Parts of converters, ladles, ingot moulds and casting machines of a kind used in metallurgy or in metal foundries, n.e.s.Import4
inventory_2Chapter 73Published 2017-03 to 2024-015of 66 loaded codes8%
73Chapter-level link, no HMRC descriptionImport3months published, 2017-12 to 2020-09
inventory_2Chapter 75Published 2019-06 to 2026-074of 66 loaded codes6%
7505 12 00Bars, rods, profiles and wire, of nickel alloys, n.e.s. (excl. electrically insulated products)ImportExport
inventory_2Chapter 81Published 2018-10 to 2026-063of 66 loaded codes5%
8105 20 00Cobalt mattes and other intermediate products of cobalt metallurgy; unwrought cobalt; cobalt powdersImportExport
inventory_2Chapter 74Published 2022-04 to 2026-022of 66 loaded codes3%
7407 29 00Bars, rods and profiles of copper alloys, n.e.s. (excl. such articles of copper-zinc base alloys "brass")ImportExport
inventory_2Chapter 76Published 2022-07 to 2024-102of 66 loaded codes3%
7606 12 99Plates, sheets and strip, of aluminium alloys, of a thickness of >= 6 mm, square or rectangular (excl. such products painted, varnished or coated with plastics)Export1
inventory_2Chapter 25Published 2024-07 to 2024-071of 66 loaded codes2%
25Chapter-level link, no HMRC descriptionExport1months published, 2024-07 to 2024-07
inventory_2Chapter 38Published 2023-07 to 2026-021of 66 loaded codes2%
3816 00 90Refractory cements, mortars, concretes and similar compositions (excl. dolomite ramming mix and preparations based on graphite or other carbonaceous substances)Import3
inventory_2Chapter 69Published 2023-11 to 2025-021of 66 loaded codes2%
6903 90 90Retorts, crucibles, mufflers, nozzles, plugs, supports, cupels, tubes, pipes, sheaths, rods, slide gates and other refractory ceramic goods (excl. those of siliceous fossil meals or of similar siliceous earths, articles of heading 6902, articles containing carbon, alumina or silica of subheading 6903.10.00 and 6903.90.10)Import
inventory_2Chapter 90Published 2024-06 to 2024-061of 66 loaded codes2%
9024 10 40Machines and appliances for testing the hardness of metalsImport1months published, 2024-06 to 2024-06
Export
3months published, 2017-02 to 2026-05
7222 20 39Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section measuring < 25 mm and containing by weight < 2,5% nickelImport3months published, 2024-03 to 2024-09
7228 30 61Bars and rods of alloy steel other than stainless steel, only hot-rolled, hot-drawn or hot-extruded, of circular cross-section, of a diameter of >= 80 mm (other than of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.30.41 and excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)Import3months published, 2022-08 to 2025-12
7214 91 90Other bars and rods of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded, containing by weight >= 0,25% of carbon, of rectangular "other than square" cross-section (excl. those with indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling, and free-cutting steel)Export2months published, 2025-02 to 2026-04
7214 99 39Bars and rods of iron or non-alloy steel, only hot-rolled, hot-drawn or hot-extruded, containing < 0,25% of carbon, of circular cross-section of a maximum diameter of < 80 mm (other than of free-cutting steel, smooth bars and rods, for reinforced concrete, or bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process, or wound after rolling)ImportExport2months published, 2022-10 to 2024-05
7218 91 10Semi-finished products of stainless steel, of rectangular "other than square" cross-section, containing by weight >= 2,5% nickelImportExport2months published, 2023-03 to 2024-09
7221 00 10Bars and rods of stainless steel, hot-rolled, in irregularly wound coils, containing by weight >= 2,5% nickelExport2months published, 2023-04 to 2023-10
7222 20 29Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section measuring >= 25 mm but < 80 mm and containing by weight < 2,5% nickelExport2months published, 2025-05 to 2026-06
7222 20 31Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section measuring < 25 mm and containing by weight >= 2,5% nickelImportExport2months published, 2022-04 to 2023-06
7222 30 97Bars and rods of stainless steel, cold-formed or cold-finished and further worked, or hot-formed and further worked, n.e.s. (excl. forged products)Export2months published, 2022-05 to 2022-08
7226 91 91Flat-rolled products of alloy steel other than stainless steel, simply hot-rolled, of a thickness of >= 4,75 mm, of a width of < 600 mm (excl. of tool steel, silicon-electrical steel or high speed steel)Import2months published, 2025-07 to 2025-09
7214 99 31Bars and rods of iron or non-alloy steel, only hot-rolled, hot-drawn or hot-extruded, containing < 0,25% of carbon, of circular cross-section, of a maximum diameter of >= 80 mm (other than of free-cutting steel, smooth bars and rods, for reinfoced concrete, or bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process, or wound after rolling)Export1months published, 2026-03 to 2026-03
7215 90 00Bars or rods, of iron or non-alloy steel, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s.Export1months published, 2022-05 to 2022-05
7216 10 00U, I or H sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of < 80 mmExport1months published, 2025-09 to 2025-09
7216 33 90H sections of iron or non-alloy steel, simply hot-rolled, hot-drawn or extruded, of a height > 180 mmExport1months published, 2023-01 to 2023-01
7216 50 99Profile of iron or non-alloy steel, only hot-rolled, hot-drawn or hot-extruded (other than with a cross-section which is capable of being enclosed in a square the side of which is <= 80 mm, and U-, I-, H-, L- or T-sections and ribbed sections [ribbed steel])Export1months published, 2023-01 to 2023-01
7216 69 00Angles, shapes and sections, of iron or non-alloy steel, not further worked than cold-formed or cold-finished (excl. profiled sheet)Export1months published, 2023-01 to 2023-01
7218 10 00Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting)Export1months published, 2018-10 to 2018-10
7218 91 80Semi-finished products of stainless steel, of rectangular "other than square" cross-section, containing by weight < 2,5 nickelExport1months published, 2023-03 to 2023-03
7218 99 80Semi-finished products of stainless steel, forged (excl. products of square or rectangular cross-section)Import1months published, 2022-02 to 2022-02
7219 11 00Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mmExport1months published, 2023-12 to 2023-12
7219 22 10Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm but <= 10 mm, containing by weight >= 2,5% nickelExport1months published, 2022-05 to 2022-05
7219 34 10Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm, containing by weight >= 2,5% nickelImport1months published, 2023-09 to 2023-09
7220 12 00Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mmExport1months published, 2022-08 to 2022-08
7222 11 81Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section measuring < 80 mm and containing by weight >= 2,5% nickelExport1months published, 2022-12 to 2022-12
7222 20 11Bars and rods of stainless steel, of circular cross-section of a diameter >= 80 mm, simply cold-formed or cold-finished, containing by weight >= 2,5% nickelExport1months published, 2023-03 to 2023-03
7222 30 51Other bars and rods of stainless steel, containing by weight >= 2,5% of nickel, forgedImport1months published, 2024-12 to 2024-12
7222 40 90Angles, shapes and sections of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s.Import1months published, 2016-11 to 2016-11
7224 10 90Steel, alloy, other than stainless, in ingots or other primary forms (excl. of tool steel, waste and scrap in ingot form and products obtained by continuous casting)Import1months published, 2022-08 to 2022-08
7224 90 14Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring >= twice the thickness (excl. of tool steel)Import1months published, 2026-05 to 2026-05
7225 40 60Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm but <= 10 mm (excl. products of tool steel, high-speed steel or silicon-electrical steel)Import1months published, 2024-03 to 2024-03
7226 91 20Flat-rolled products of tool steel, of a width of < 600 mm, simply hot-rolledImport1months published, 2025-08 to 2025-08
7228 30 89Bars and rods of alloy steel other than stainless steel, only hot-rolled, hot-drawn or hot-extruded, of other than rectangular [other than square] cross-section, rolled on four faces, or of circular cross-section (other than of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.30.49 and excl. semi-finished products, flat-rolled products and hot-rolled bars and rodsImport1months published, 2024-06 to 2024-06
7228 60 20Bars and rods of tool steel, cold-formed or cold-finished and further worked or hot-formed and further worked (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)Import1months published, 2025-03 to 2025-03
months published, 2023-12 to 2026-06
84Chapter-level link, no HMRC descriptionImportExport3months published, 2023-01 to 2024-05
8424 30 90Steam or sand blasting machines and similar jet projecting machines (excl. compressed air operated and water cleaning appliances with built-in motor and appliances for cleaning special containers)Import2months published, 2026-05 to 2026-06
8454 20 00Ingot moulds and ladles, of a kind used in metallurgy or in metal foundriesImport2months published, 2023-12 to 2024-01
Show the 7 sampled codesShow fewer codesexpand_moreexpand_less
8421 99 90Parts of machinery and apparatus for filtering or purifying liquids or gases, n.e.s.Import1months published, 2026-06 to 2026-06
8455 30 10Rolls for metal-rolling mills, of cast ironImport1months published, 2026-06 to 2026-06
8479 81 00Machinery for treating metal, incl. electric wire coil-winders, n.e.s. (excl. industrial robots, furnaces, dryers, spray guns and the like, high-pressure cleaning equipment and other jet cleaners, rolling millls or machines, machine tools and rope or cable-making machines)Import1months published, 2026-05 to 2026-05
7304 39 82Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm (excl. cold-drawn or cold-rolled, of cast iron, line pipe of a kind used for oil or gas pipelines, casing, tubing and drill pipe of a kind used in drilling for oil or gas and tubes, and gas pipes of subheading 7304 39 50)Import3months published, 2023-03 to 2024-01
7314 50 00Expanded metal, of iron or steelExport2months published, 2017-03 to 2017-07
7304 49 89Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, of an external diameter of > 406,4 mm (excl. cold-drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, and casing and tubing of a kind used for drilling for oil or gas and tubes)Import1months published, 2023-06 to 2023-06
Show the 5 sampled codesShow fewer codesexpand_moreexpand_less
7314 31 00Grill, netting and fencing, of iron or steel wire, welded at the intersection, plated or coated with zinc (excl. products of wire with a maximum cross-sectional dimension of >= 3 mm and having a mesh size of >= 100 cm )Export1months published, 2018-07 to 2018-07
40
months published, 2019-06 to 2026-07
7507 12 00Tubes and pipes of nickel alloysExport3months published, 2022-10 to 2024-10
75Chapter-level link, no HMRC descriptionExport1months published, 2022-09 to 2022-09
7505 22 00Wire of nickel alloys (excl. electrically insulated products)Export1months published, 2024-08 to 2024-08
43
months published, 2021-11 to 2026-06
8105 90 00Articles of cobalt, n.e.s.Export6months published, 2018-10 to 2023-09
8108 90 30Titanium bars, rods, profiles and wire, n.e.s.Export1months published, 2022-02 to 2022-02
19
months published, 2022-04 to 2026-02
7411 22 00Tubes and pipes of copper-nickel base alloys "cupro-nickel" or copper-nickel-zinc base alloys "nickel silver"Export1months published, 2023-12 to 2023-12
months published, 2024-10 to 2024-10
7606 92 00Plates, sheets and strip, of aluminium alloys, of a thickness of > 0,2 mm (other than square or rectangular)Export1months published, 2022-07 to 2022-07
months published, 2023-07 to 2026-02
2
months published, 2023-11 to 2025-02
PRO - ROLL LTD · Tradaro
On the same codes
Traders published against the most of the same codes. A shared code is a shared commodity, not a relationship between them.
UK traderHMRC trader directoryref 83664