Published trader · United Kingdom
Directory snapshot: 2026-09-12. Address observation date, not a trade date.
HMRC trader directory · ref 105570 · published 2025-08 to 2026-07
Months published
Loading months publishedCommodity codes
Loading commodity codesMonths published
Commodity codes HMRC published this trader against, month by month, within the loaded coverage. A gap is a month with no published link in that coverage, not a month without trade.
Codes in the loaded coverage this trader is published against, most months first. Descriptions are HMRC’s own, verbatim. This list is bounded; codes outside the loaded coverage are not listed.
| Commodity code | Description (as published) | Direction | Months | Window |
|---|---|---|---|---|
| 7326 90 98 | Articles of iron or steel, n.e.s. | ImporterExporter | 11 | 2025-08 – 2026-06 |
| 8431 49 80 | Parts of machinery of heading 8426, 8429 and 8430, n.e.s. | ImporterExporter | 10 | 2025-08 – 2026-05 |
| 7208 51 20 | Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 15 mm, without patterns in relief | ImporterExporter | 8 | 2025-08 – 2026-07 |
| 7307 92 90 | Elbows and bends, of iron or steel, threaded (excl. cast or of stainless steel) | Exporter | 8 | 2025-08 – 2026-05 |
| 4009 21 00 | Tubes, pipes and hoses, of vulcanised rubber (excl. hard rubber), reinforced or otherwise combined only with metal, without fittings | Exporter | 7 | 2025-08 – 2026-04 |
| 7225 40 40 | Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm (excl. products of tool steel, high-speed steel or silicon-electrical steel) | ImporterExporter | 7 | 2025-08 – 2026-07 |
| 7307 91 00 | Flanges of iron or steel (excl. cast or stainless products) | ImporterExporter | 7 | 2025-08 – 2026-05 |
| 7307 99 10 | Threaded tube or pipe fittings, of iron or steel (excl. cast iron or stainless steel products, flanges, elbows, bends and sleeves) | Exporter | 7 | 2025-09 – 2026-06 |
| 8413 50 61 | Hydraulic fluid power piston pumps (excl. hydraulic units) | Exporter | 7 | 2025-08 – 2026-05 |
| 7307 99 80 | Tube or pipe fittings, of iron or steel (excl. of cast iron or stainless steel, threaded, butt welding fittings, and flanges) | Exporter | 6 | 2025-08 – 2026-05 |
| 7308 90 98 | Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet) | ImporterExporter | 6 | 2025-08 – 2026-07 |
| 3926 90 97 | Articles of plastics and articles of other materials of heading 3901 to 3914, n.e.s. | ImporterExporter | 5 | 2025-08 – 2026-06 |
| 4016 99 91 | Rubber-to-metal bonded parts of vulcanised rubber (excl. hard rubber and those of cellular rubber and those of a type intended exclusively or mainly for use in motor vehicles of heading 8701 to 8705) | Exporter | 5 | 2025-11 – 2026-05 |
| 7208 52 91 | Flat-rolled products of iron or non-alloy steel, of a width of >= 2.050 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief | Importer | 5 | 2025-08 – 2026-02 |
| 7318 22 00 | Washers of iron or steel (excl. spring washers and other lock washers) | Exporter | 5 | 2026-01 – 2026-06 |
| 8412 21 80 | Hydraulic power engines and motors, linear acting "cylinders" (excl. hydraulic systems) | Exporter | 5 | 2025-09 – 2026-04 |
| 8481 20 10 | Valves for the control of oleohydraulic power transmission | ImporterExporter | 5 | 2025-09 – 2026-06 |
| 8528 52 91 | LCD monitors designed for computer use but of a kind not used principally with a computer (excl. with TV receiver) | ImporterExporter | 5 | 2025-08 – 2026-06 |
| 8537 10 91 | Programmable memory controllers (excl. numerical control panels with built-in automatic data-processing machines) | ImporterExporter | 5 | 2025-08 – 2026-05 |
| 8544 42 90 | Electric conductors, for a voltage <= 1.000 V, insulated, fitted with connectors, n.e.s. (other than of a kind used for telecommunications) | ImporterExporter | 5 | 2025-08 – 2026-06 |
| 3403 19 80 | Lubricating preparations, incl. cutting-oil preparations, bolt or nut release preparations, anti-rust or anti-corrosion preparations and mould-release preparations, based on lubricants, containing, by weight, < 70% of petroleum oil or oil obtained from bituminous minerals (excl. preparations for the treatment of textile materials, leather, fur skins or other materials, and lubricants having a bio- | ImporterExporter | 4 | 2025-08 – 2026-05 |
| 7208 51 91 | Flat-rolled products of iron or non-alloy steel, of a width of >= 2.050 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 10 mm but <= 15 mm, without patterns in relief (excl. "wide flats") | ImporterExporter | 4 | 2025-08 – 2026-07 |
| 7229 20 00 | Wire of silico-manganese steel, in coils (excl. bars and rods) | ImporterExporter | 4 | 2025-12 – 2026-06 |
| 7306 90 00 | Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm) | Exporter | 4 | 2026-01 – 2026-05 |
| 8466 93 40 | Parts and accessories of machines of subheadings 84561110, 84561210, 845620, 845630, 845710, 845891, 84592100, 845961 or 846150 of a kind used solely or principally for the manufacture of printed circuits, printed circuit assemblies, parts of heading 8517, or parts of automatic data processing machines | ImporterExporter | 4 | 2025-09 – 2026-02 |
| 8537 10 98 | Boards, cabinets and similar combinations of apparatus for electric control or the distribution of electricity, for a voltage <= 1.000 V (excl. switching apparatus for line telephony or line telegraphy, numerical control panels with built-in automatic data-processing machines, programmable memory controllers and touch screens) | Exporter | 4 | 2025-09 – 2026-06 |
| 8544 49 99 | Electric conductors for a voltage 1.000 V, insulated, not fitted with connectors, n.e.s. (excl. winding wire, coaxial conductors, wiring sets for vehicles, aircraft or ships, and wire and cables with individual conductor wires of a diameter > 0,51 mm) | ImporterExporter | 4 | 2025-08 – 2026-07 |
| 2710 19 81 | Motor oils, compressor lube oils and turbine lube oils containing by weight >= 70% of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations (excl. for undergoing chemical transformation) | ImporterExporter | 3 | 2025-08 – 2026-06 |
| 2710 19 87 | Gear oils and reductor oils containing by weight >= 70% of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituent of the preparations (excl. for undergoing chemical transformation) | ImporterExporter | 3 | 2025-08 – 2026-06 |
| 4009 22 00 | Tubes, pipes and hoses, of vulcanised rubber (excl. hard rubber), reinforced or otherwise combined only with metal, with fittings | Exporter | 3 | 2025-10 – 2026-04 |
| 7229 90 90 | Wire of alloy steel other than stainless, in coils (excl. rolled bars and rods, wire of high-speed steel or silico-manganese steel and articles of subheading 7229.90.50) | ImporterExporter | 3 | 2025-08 – 2026-07 |
| 7304 59 89 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, of an external diameter of > 406,4 mm (excl. cold-drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas, and products of subheading 7304 59 30) | ImporterExporter | 3 | 2025-09 – 2026-05 |
| 7318 15 48 | Screws and bolts, of iron or steel other than stainless "whether or not with their nuts and washers", without heads, with a tensile strength of >= 800 MPa (excl. screws and bolts for fixing railway track construction material) | Exporter | 3 | 2025-10 – 2026-06 |
| 7318 19 00 | Threaded articles, of iron or steel, n.e.s. | Exporter | 3 | 2026-04 – 2026-06 |
| 8412 29 81 | Hydraulic fluid power motors (excl. linear acting [cylinders] and hydraulic systems) | ImporterExporter | 3 | 2025-08 – 2026-05 |
| 8419 50 80 | Heat-exchange units (excl. those used with boilers and those made of fluoropolymers with inlet and outlet tube bores with inside diameters measuring <=3 cm) | Exporter | 3 | 2025-10 – 2026-04 |
| 8421 32 00 | Catalytic converters or particulate filters, whether or not combined, for purifying or filtering exhaust gases from internal combustion engines | Exporter | 3 | 2025-09 – 2026-05 |
| 8431 49 20 | Parts of machinery of heading 8426, 8429 and 8430 of cast iron or cast steel, n.e.s. | Exporter | 3 | 2026-02 – 2026-05 |
| 8479 89 97 | Machines, apparatus and mechanical appliances, n.e.s. | ImporterExporter | 3 | 2025-08 – 2026-07 |
| 8483 40 29 | Gears and gearing, for machinery (excl. friction gears, spur, helical, bevel, bevel-spur gears and gearing and worm gear, gear boxes and other speed changers) | ImporterExporter | 3 | 2025-08 – 2026-05 |
| 8483 60 80 | Clutches and shaft couplings, incl. universal joints (excl. of cast iron or cast steel) | Exporter | 3 | 2025-09 – 2026-04 |
| 8483 90 89 | Toothed wheels, chain sprockets and other transmission elements presented separately and parts of transmission shafts and cranks; bearing housings and plain shaft bearings; gears and gearing, ball or roller screws, gear boxes and other speed changers, flywheels and pulleys, clutches and shaft couplings, n.e.s. (excl. of cast iron or cast steel) | Exporter | 3 | 2026-01 – 2026-05 |
| 8531 10 95 | Burglar or fire alarms and similar apparatus (excl. those for use in motor vehicles or buildings) | ImporterExporter | 3 | 2025-08 – 2026-05 |
| 8536 90 10 | Connections and contact elements, for wire and cables, for a voltage of <= 1.000 V (excl. plugs, sockets and prefabricated elements) | ImporterExporter | 3 | 2025-08 – 2026-05 |
| 8538 90 99 | Parts suitable for use solely or principally with the apparatus of heading 8535, 8536 or 8537, n.e.s. (excl. electronic assemblies, and boards, panels, consoles, desks, cabinets and other bases for the goods of heading 8537, not equipped with their apparatus, and for wafer probers) | Exporter | 3 | 2025-11 – 2026-06 |
| 2710 19 83 | Liquids for hydraulic purposes containing by weight >= 70% of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations (excl. for undergoing chemical transformation) | ImporterExporter | 2 | 2025-09 – 2026-05 |
| 3208 90 91 | Paints and varnishes, incl. enamels and lacquers, based on synthetic polymers, dispersed or dissolved in a non-aqueous medium (excl. those based on polyesters and acrylic or vinyl polymers) | Exporter | 2 | 2025-08 – 2026-02 |
| 3917 32 00 | Flexible tubes, pipes and hoses of plastics, not reinforced or otherwise combined with other materials, without fittings | Exporter | 2 | 2026-02 – 2026-05 |
| 3917 39 00 | Flexible tubes, pipes and hoses, of plastics, reinforced or otherwise combined with other materials (excl. those with a burst pressure of >= 27,6 MPa) | Exporter | 2 | 2025-11 – 2026-04 |
| 7304 31 20 | Precision tubes, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas) | Exporter | 2 | 2025-11 – 2026-05 |
| 7304 39 83 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. cold-drawn or cold-rolled, of cast iron, line pipe of a kind used for oil or gas pipelines, casing, tubing and drill pipe of a kind used in drilling for oil or gas and tubes, and gas pipes of subheading 7304 39 50) | Importer | 2 | 2025-09 – 2026-02 |
| 7309 00 59 | Reservoirs, tanks, vats and similar containers, of iron or steel, for liquids, of a capacity of <= 100.000 l but > 300 l (excl. containers lined or heat-insulated or fitted with mechanical or thermal equipment and containers specifically constructed or equipped for one or more types of transport) | Exporter | 2 | 2025-08 – 2026-01 |
| 7318 15 75 | Hexagon screws and bolts, of stainless steel "whether or not with their nuts and washers" (excl. with socket head, wood screws, self-tapping screws and screws and bolts for fixing railway track construction material) | Exporter | 2 | 2026-04 – 2026-05 |
| 7318 15 88 | Hexagon screws and bolts, of iron or steel other than stainless "whether or not with their nuts and washers", with a tensile strength of => 800 MPa (excl. with socket head, wood screws, self-tapping screws and screws and bolts for fixing railway track construction material) | Exporter | 2 | 2026-05 – 2026-06 |
| 7318 21 00 | Spring washers and other lock washers, of iron or steel | Exporter | 2 | 2026-04 – 2026-06 |
| 7616 99 90 | Articles of aluminium, uncast, n.e.s. | ImporterExporter | 2 | 2025-09 – 2026-05 |
| 8409 91 00 | Parts suitable for use solely or principally with spark-ignition internal combustion piston engine, n.e.s. | Exporter | 2 | 2026-02 – 2026-04 |
| 8415 10 10 | Air conditioning machines designed to be fixed to a window, wall, ceiling or floor, self-contained | Exporter | 2 | 2025-11 – 2026-06 |
| 8421 23 00 | Oil or petrol-filters for internal combustion engines | Exporter | 2 | 2026-04 – 2026-06 |
| 8421 99 90 | Parts of machinery and apparatus for filtering or purifying liquids or gases, n.e.s. | ImporterExporter | 2 | 2025-08 – 2026-06 |
| 8424 10 00 | Fire extinguishers, whether or not charged | Exporter | 2 | 2025-08 – 2026-02 |
| 8425 39 00 | Winches and capstans, non-powered by electric motor | Exporter | 2 | 2025-12 – 2026-06 |
| 8426 41 00 | Mobile cranes and works trucks fitted with a crane, self-propelled, on tyres (excl. wheel-mounted cranes, mobile lifting frames on tyres and straddle carriers) | Exporter | 2 | 2025-11 – 2025-12 |
| 8431 41 00 | Buckets, shovels, grabs and grips for machinery of heading 8426, 8429 and 8430 | ImporterExporter | 2 | 2025-09 – 2026-06 |
| 8466 20 91 | Work holders for lathes (excl. work holders in the form of jigs and fixtures for specific applications, incl. sets of standard jig and fixture components) | Exporter | 2 | 2026-04 – 2026-06 |
| 8481 30 91 | Check "non-return" valves for pipes, boiler shells, tanks, vats or the like, of cast iron or of steel | Exporter | 2 | 2026-04 – 2026-05 |
| 8481 80 81 | Ball and plug valves for pipes, boiler shells, tanks, vats or the like (excl. taps, cocks and valves for sinks, washbasins, bidets, water cisterns, baths and similar fixtures, and central heating radiator valves) | Exporter | 2 | 2026-01 – 2026-06 |
| 8483 30 80 | Plain shaft bearings for machinery | Exporter | 2 | 2025-09 – 2026-04 |
| 8483 40 21 | Spur and helical gears and gearing, for machinery (excl. friction gears, gear boxes and other speed changers) | Exporter | 2 | 2025-09 – 2026-05 |
| 8515 39 90 | Machines for arc welding of metals, incl. plasma arc welding, neither fully nor partly automatic (excl. machines for manual welding with coated electrodes) | Exporter | 2 | 2026-04 – 2026-06 |
| 8517 62 00 | Machines for the reception, conversion and transmission or regeneration of voice, images or other data, incl. switching and routing apparatus (excl. telephone sets, telephones for cellular networks or for other wireless networks) | Exporter | 2 | 2025-10 – 2026-05 |
| 8528 59 00 | Monitors (excl. with TV receiver, CRT and those designed for computer use) | ImporterExporter | 2 | 2025-08 – 2026-05 |
| 8536 50 07 | Electromechanical snap-action switches for a current <= 11 A (excl. relays and automatic circuit breakers) | Exporter | 2 | 2025-08 – 2026-05 |
| 8536 69 90 | Plugs and sockets for a voltage of <= 1.000 V (excl. those for coaxial cables and printed circuits) | Exporter | 2 | 2026-05 – 2026-06 |
| 8536 90 95 | Electrical apparatus for making connections to or in electrical circuits, for a voltage <= 1.000 V (excl. fuses, circuit breakers and other apparatus for protecting electrical circuits, relays and other switches, lamp holders, plugs and sockets, prefabricated elements for electrical circuits, connections and contact elements for wire and cables, and car battery clamps) | Exporter | 2 | 2026-05 – 2026-06 |
| 8544 49 95 | Electric conductors for a voltage > 80 V but < 1.000 V, insulated, not fitted with connectors, n.e.s. (excl. winding wire, coaxial conductors, wiring sets for vehicles, aircraft or ships, and wire and cables with individual conductor wires of a diameter > 0,51 mm) | Exporter | 2 | 2026-01 – 2026-05 |
| 8708 92 99 | Parts for silencers "mufflers" and exhaust pipes, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.92.20 and of closed-d | Exporter | 2 | 2026-03 – 2026-04 |
| 9031 80 20 | Instruments, appliances and machines for measuring or checking geometrical quantities, n.e.s. in Ch 90 | Exporter | 2 | 2026-05 – 2026-06 |
| 2710 19 99 | Lubricating oils and other heavy oils and preparations n.e.s., containing by weight >= 70% of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations (excl. for undergoing chemical transformation) | Importer | 1 | 2025-09 – 2025-09 |
| 3403 99 00 | Lubricant preparations, incl. cutting-oil preparations, bolt or nut release preparations, anti-rust or anti-corrosion preparations and mould-release preparations, based on lubricants but not containing petroleum oil or bituminous mineral oil (excl. preparations for the treatment of textiles, leather, furskins and other materials) | Importer | 1 | 2025-08 – 2025-08 |
| 3820 00 00 | Anti-freezing preparations and prepared de-icing fluids (excl. prepared additives for mineral oils or other liquids used for the same purposes as mineral oils) | Exporter | 1 | 2026-05 – 2026-05 |
| 3907 50 00 | Alkyd resins, in primary forms | Exporter | 1 | 2026-05 – 2026-05 |
| 3917 29 00 | Rigid tubes, pipes and hoses, of plastics (excl. those of polymers of ethylene, propylene and vinyl chloride) | Exporter | 1 | 2025-10 – 2025-10 |
| 3919 90 80 | Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls > 20 cm wide (excl. floor, wall and ceiling coverings of heading 3918, and circular polishing pads used in semiconductor wafer production)) | Exporter | 1 | 2026-05 – 2026-05 |
| 3920 10 89 | Plates, sheets, film, foil, tape, strip, of unexpanded polymers of ethylene, not reinforced and non-cellular "laminated" or supported or similarly combined with other materials, unworked or not further worked than surface-worked or only cut to square or rectangular shapes, with a thickness of > 0,125 mm (other than self-adhesive and floor, wall and ceiling coverings of heading 3918, and synthetic | Importer | 1 | 2025-08 – 2025-08 |
| 4008 21 90 | Plates, sheets and strip, of non-cellular rubber (excl. floor coverings and mats) | Exporter | 1 | 2026-04 – 2026-04 |
| 4009 41 00 | Tubes, pipes and hoses, of vulcanised rubber (excl. hard rubber), reinforced or otherwise combined with materials other than metal or textile materials, without fittings | Exporter | 1 | 2025-09 – 2025-09 |
| 4016 93 00 | Gaskets, washers and other seals, of vulcanised rubber (excl. hard rubber and those of cellular rubber) | Exporter | 1 | 2026-05 – 2026-05 |
| 4819 10 00 | Cartons, boxes and cases, of corrugated paper or paperboard | Importer | 1 | 2025-10 – 2025-10 |
| 5607 50 19 | Twine, cordage, ropes and cables, of nylon, other polyamides or polyesters, not plaited or braided and whether or not impregnated, coated, covered or sheathed with rubber or plastics, with a linear density of > 50.000 decitex "5 g/m" | Exporter | 1 | 2026-06 – 2026-06 |
| 6307 90 98 | Made-up articles of textile materials, incl. dress patterns, n.e.s. (excl. of felt, knitted or crocheted, single-use drapes used during surgical procedures made up of nonwovens, and protective face masks) | Exporter | 1 | 2026-05 – 2026-05 |
| 7214 91 10 | Bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight < 0,25% of carbon, of rectangular "other than square" cross-section (excl. those with indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling, and free-cutting steel) | Exporter | 1 | 2026-07 – 2026-07 |
| 7225 40 60 | Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm but <= 10 mm (excl. products of tool steel, high-speed steel or silicon-electrical steel) | Exporter | 1 | 2026-07 – 2026-07 |
| 73 | HS chapter: HMRC publishes no description for a chapter-level link | Exporter | 1 | 2026-07 – 2026-07 |
| 7304 39 82 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm (excl. cold-drawn or cold-rolled, of cast iron, line pipe of a kind used for oil or gas pipelines, casing, tubing and drill pipe of a kind used in drilling for oil or gas and tubes, and gas pipes of subheading 7304 39 50) | Exporter | 1 | 2026-07 – 2026-07 |
| 7304 39 88 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, of an external diameter of > 406,4 mm (excl. cold-drawn or cold-rolled, of cast iron, line pipe of a kind used for oil or gas pipelines, casing, tubing and drill pipe of a kind used in drilling for oil or gas and tubes, and gas pipes of subheading 7304 39 50) | Importer | 1 | 2025-08 – 2025-08 |
| 7304 59 82 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, of an external diameter of <= 168,3 mm (excl. cold-drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas, and products of subheading 7304 59 30) | Exporter | 1 | 2026-07 – 2026-07 |
| 7304 59 83 | Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. cold-drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas, and products of subheading 7304 59 30) | Exporter | 1 | 2026-07 – 2026-07 |
| 7305 31 00 | Tubes and pipes having circular cross-sections and an external diameter of > 406,4 mm, of iron or steel, longitudinally welded (excl. products of a kind used for oil or gas pipelines or of a kind used in drilling for oil or gas) | Exporter | 1 | 2026-05 – 2026-05 |
| 7307 19 90 | Cast tube or pipe fittings of steel | Importer | 1 | 2026-02 – 2026-02 |
| 7307 22 90 | Elbows and bends, of stainless steel, threaded (excl. cast products) | Exporter | 1 | 2026-03 – 2026-03 |
| 7310 10 00 | Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material, of a capacity of >= 50 l but <= 300 l, n.e.s. (excl. containers for compressed or liquefied gas, or containers fitted with mechanical or thermal equipment) | Exporter | 1 | 2026-05 – 2026-05 |
| 7312 10 83 | Ropes and cables, incl. locked-coil ropes, of iron or steel other than stainless steel, with a maximum cross-sectional dimension of > 12 mm but <= 24 mm, uncoated or only zinc-plated or zinc-coated (other than electrically insulated, twisted fencing and barbed wire) | Importer | 1 | 2025-09 – 2025-09 |
| 7318 15 68 | Hexagonal-socket head screws and bolts, of iron or steel other than stainless "whether or not with their nuts and washers" (excl. wood screws, self-tapping screws and screws and bolts for fixing railway track construction material) | Exporter | 1 | 2026-06 – 2026-06 |
| 7318 15 95 | Screws and bolts, of iron or steel "whether or not with their nuts and washers", with heads (excl. with slotted, cross-recessed or hexagonal head; wood screws, self-tapping screws and screws and bolts for fixing railway track construction material, screw hooks and screw rings) | Exporter | 1 | 2026-06 – 2026-06 |
| 7318 16 39 | Nuts of stainless steel (excl. blind rivet nuts) | Exporter | 1 | 2026-05 – 2026-05 |
| 7318 16 60 | Self-locking nuts of iron or steel other than stainless | Exporter | 1 | 2026-06 – 2026-06 |
| 7318 16 99 | Nuts of iron or steel other than stainless, with an inside diameter > 12 mm (excl. blind rivet nuts and self-locking nuts) | Exporter | 1 | 2025-11 – 2025-11 |
| 7326 90 30 | Ladders and steps, of iron or steel | Exporter | 1 | 2026-04 – 2026-04 |
| 7419 80 90 | Articles of copper, n.e.s. | Exporter | 1 | 2026-05 – 2026-05 |
| 8205 70 00 | Vices, clamps and the like (excl. accessories for and parts of machine tools or water-jet cutting machines) | Exporter | 1 | 2026-04 – 2026-04 |
| 8205 90 90 | Sets of articles of two or more subheadings of heading 8205 | Exporter | 1 | 2025-11 – 2025-11 |
| 8408 90 81 | Compression-ignition internal combustion piston engine "diesel or semi-diesel engine", new, of a power > 500 kW but <= 1.000 kW (excl. engines for rail traction or marine propulsion and engines for motor vehicles of chapter 87) | Exporter | 1 | 2025-10 – 2025-10 |
| 8409 99 00 | Parts suitable for use solely or principally with compression-ignition internal combustion piston engine "diesel or semi-diesel engine", n.e.s. | Exporter | 1 | 2026-05 – 2026-05 |
| 8412 31 00 | Pneumatic power engines and motors, linear-acting, "cylinders" | Exporter | 1 | 2026-04 – 2026-04 |
| 8412 90 40 | Parts of hydraulic power engines and motors, n.e.s. | Importer | 1 | 2026-05 – 2026-05 |
| 8412 90 70 | Parts of non-electrical engines and motors, n.e.s. | Exporter | 1 | 2026-05 – 2026-05 |
| 8412 90 80 | Parts of non-electrical engines and motors, n.e.s. | Exporter | 1 | 2025-10 – 2025-10 |
| 8413 20 00 | Hand pumps for liquids (excl. those of subheading 8413.11 and 8413.19) | Exporter | 1 | 2025-11 – 2025-11 |
| 8413 50 69 | Piston pumps, power-driven (excl. pumps of subheading 8413.11 and 8413.19, fuel, lubricating or cooling medium pumps for internal combustion piston engine, concrete pumps, hydraulic pumps, incl. hydraulic units, and dosing pumps) | Exporter | 1 | 2026-05 – 2026-05 |
| 8413 60 20 | Rotory positive displacement hydraulic units, with pumps | Exporter | 1 | 2026-05 – 2026-05 |
| 8413 81 00 | Pumps for liquids, power-driven (excl. those of subheading 8413.11 and 8413.19, fuel, lubricating or cooling medium pumps for internal combustion piston engine, concrete pumps, general reciprocating or rotary positive displacement pumps and centrifugal pumps of all kinds) | Exporter | 1 | 2025-09 – 2025-09 |
| 8413 91 00 | Parts of pumps for liquids, n.e.s. | Exporter | 1 | 2026-05 – 2026-05 |
| 8414 59 25 | Axial fans (excl. table, floor, wall, window, ceiling or roof fans, with a self-contained electric motor of an output <= 125 W, and fans for cooling IT equipment of 8414 59 15) | Exporter | 1 | 2026-05 – 2026-05 |
| 8414 80 73 | Rotary displacement compressors, single-shaft (excl. compressors for refrigerating equipment and air compressors mounted on a wheeled chassis for towing) | Exporter | 1 | 2025-09 – 2025-09 |
| 8415 20 00 | Air conditioning machines of a kind used for persons, in motor vehicles | Importer | 1 | 2026-05 – 2026-05 |
| 8421 29 80 | Machinery and apparatus for filtering or purifying liquids (excl. such machinery and apparatus for water and other beverages, oil or petrol filters for internal combustion engines, artificial kidneys, and those made of fluoropolymers with filter or purifier membrane thickness <= 140 ?m) | Exporter | 1 | 2026-06 – 2026-06 |
| 8424 89 70 | Mechanical appliances, whether or not hand-operated, for projecting, dispersing or spraying liquids or powders, n.e.s. | Importer | 1 | 2025-09 – 2025-09 |
| 8428 39 90 | Continuous-action conveyors for goods or materials (excl. specially designed for underground use, continuous-action conveyors with buckets or belts, wheel conveyors and other roller conveyors, pneumatic continuous-action conveyors and automated material handling machines for transport, handling and storage of material for semiconductor devices) | Exporter | 1 | 2025-10 – 2025-10 |
| 8431 20 00 | Parts of fork-lift trucks and other works trucks fitted with lifting or handling equipment, n.e.s. | Importer | 1 | 2026-05 – 2026-05 |
| 8471 50 00 | Processing units for automatic data-processing machines, whether or not containing in the same housing one or two of the following types of unit: storage units, input units, output units (excl. those of heading 8471.41 or 8471.49 and excl. peripheral units) | Exporter | 1 | 2026-03 – 2026-03 |
| 8481 80 85 | Butterfly valves for pipes, boiler shells, tanks, vats or the like (excl. check valves) | Exporter | 1 | 2026-01 – 2026-01 |
| 8481 90 00 | Parts of valves and similar articles for pipes, boiler shells, tanks, vats or the like, n.e.s. | Exporter | 1 | 2025-08 – 2025-08 |
| 8482 10 90 | Ball bearings with greatest external diameter > 30 mm | Importer | 1 | 2026-02 – 2026-02 |
| 8483 10 50 | Articulated shafts | Exporter | 1 | 2025-09 – 2025-09 |
| 8483 10 95 | Main shafts or driving shafts, counter shafts, cam shafts, eccentric shafts and other transmission shafts (excl. cranks, crank shafts and articulated shafts) | Exporter | 1 | 2026-04 – 2026-04 |
| 8483 40 25 | Worm gear for machinery (excl. friction gears, gear boxes and other speed changers) | Exporter | 1 | 2026-05 – 2026-05 |
| 8483 90 81 | Toothed wheels, chain sprockets and other transmission elements presented separately and parts of transmission shafts and cranks; bearing housings and plain shaft bearings; gears and gearing, ball or roller screws, gear boxes and other speed changers, flywheels and pulleys, clutches and shaft couplings, of cast iron or cast steel, n.e.s. | Exporter | 1 | 2026-04 – 2026-04 |
| 8487 90 90 | Machinery parts of chapter 84, not intended for a specific purpose, n.e.s. | Exporter | 1 | 2026-04 – 2026-04 |
| 8501 62 00 | AC generators "alternators", of an output > 75 kVA but <= 375 kVA (excl. photovoltaic generators) | Exporter | 1 | 2025-09 – 2025-09 |
| 8516 29 91 | Electric space-heating and soil-heating apparatus, with built-in fan (excl. storage heating radiators) | Exporter | 1 | 2026-01 – 2026-01 |
| 8518 40 00 | Audio-frequency electric amplifiers | Exporter | 1 | 2026-05 – 2026-05 |
| 8525 89 00 | Television cameras, digital cameras and video camera recorders (excl. high-speed, radiation-hardened or radiation-tolerant, and night vision goods) | Exporter | 1 | 2026-06 – 2026-06 |
| 8536 41 90 | Relays for a voltage <= 60 V, for a current > 2 A | Exporter | 1 | 2026-05 – 2026-05 |
| 8536 50 19 | Switches for a voltage of <= 60 V (excl. relays, push-button switches and rotary switches) | Exporter | 1 | 2026-06 – 2026-06 |
| 8536 50 80 | Switches for a voltage of > 60 V and <= 1.000 V (excl. relays, automatic circuit breakers, electronic AC switches consisting of optically coupled input and output circuits "insulated thyristor AC switches", electronic switches, incl. temperature protected electronic switches, consisting of a transistor and a logic chip [chip-on-chip technology] and electromechanical snap-action switches for a curr | Exporter | 1 | 2026-05 – 2026-05 |
| 8538 10 00 | Boards, panels, consoles, desks, cabinets and other bases for the goods of heading 8537, not equipped with their apparatus | Importer | 1 | 2025-08 – 2025-08 |
| 8538 90 91 | Electronic assemblies for electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits of heading 8535 or 8536 and for control desks, cabinets and similar combinations of apparatus of heading 8537 (excl. for wafer probers) | Exporter | 1 | 2026-06 – 2026-06 |
| 8544 30 00 | Ignition wiring sets and other wiring sets for vehicles, aircraft or ships | Exporter | 1 | 2026-06 – 2026-06 |
| 8544 49 93 | Conductors, electric, for a voltage <= 80 V, insulated, not fitted with connectors, n.e.s. (excl. winding wire, coaxial conductors, wiring sets for vehicles, aircraft or ships, and wire and cables with individual conductor wires of a diameter > 0,51 mm) | Exporter | 1 | 2026-05 – 2026-05 |
| 8544 60 90 | Electric conductors for a voltage > 1.000 V, insulated, not with copper conductors, n.e.s. | Exporter | 1 | 2026-05 – 2026-05 |
| 8708 92 35 | Silencers "mufflers" and exhaust pipes, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.92.20) | Exporter | 1 | 2025-09 – 2025-09 |
| 9026 20 20 | Electronic instruments and apparatus for measuring or checking pressure of liquids or gases (excl. regulators) | Exporter | 1 | 2026-06 – 2026-06 |
| 9026 20 80 | Instruments and apparatus for measuring or checking pressure of liquids or gases, non-electronic (excl. spiral or metal diaphragm type pressure gauges, and regulators) | Exporter | 1 | 2026-03 – 2026-03 |
| 9026 80 20 | Electronic instruments or apparatus for measuring or checking variables of liquids or gases, n.e.s. | Exporter | 1 | 2025-09 – 2025-09 |
| 9026 80 80 | Non-electronic instruments or apparatus for measuring or checking variables of liquids or gases, n.e.s. | Exporter | 1 | 2026-06 – 2026-06 |
| 9027 50 00 | Instruments and apparatus for physical or chemical analysis, using UV, visible or IR optical radiations (excl. spectrometers, spectrophotometers, spectrographs, and gas or smoke analysis apparatus) | Exporter | 1 | 2026-06 – 2026-06 |
| 9031 80 80 | Non-optical instruments, appliances and machines for measuring or checking, n.e.s. in Ch 90 | Exporter | 1 | 2026-04 – 2026-04 |
| 9401 20 00 | Seats for motor vehicles | Exporter | 1 | 2026-06 – 2026-06 |
| 9401 99 20 | Parts of seats used for motor vehicles, n.e.s. | Exporter | 1 | 2025-11 – 2025-11 |
| 9403 20 80 | Metal furniture (excl. for offices, medical, surgical, dental or veterinary furniture, beds and seats) | Exporter | 1 | 2026-07 – 2026-07 |
| 9405 11 90 | Chandeliers and other electric ceiling or wall lighting fittings, solely for light-emitting diode "LED" light sources (excl. of plastics, ceramic materials or glass, and for lighting public open spaces or thoroughfares) | Exporter | 1 | 2025-11 – 2025-11 |
| 9405 42 10 | Searchlights and spotlights, solely for light-emitting diode "LED" light sources, n.e.s. | Exporter | 1 | 2026-05 – 2026-05 |
On the same codes
Traders HMRC published against the most of the same published commodity codes. A shared code is a shared commodity, not a trading relationship between them.