A filled cell is a month with at least one published link in the loaded scope. A gap is a month with no published link, not a month without trade.
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
Published in 82 months between 2016-01 and 2026-07. Each published month is listed with its commodity code count in the table above.
at least one published link
no published link in this month
outside the loaded window
swap_horizPublished as both an importer and an exporter, against 32 commodity codes across 10 tariff chapters.
event_busyPublished in 82 of the 114 months from October 2016 to March 2026. A missing month is one with no published link, not a month without trade.
scatter_plotSpread across 10 tariff chapters, none of them holding half the loaded codes.
south_westThe chapter 72 codes are import only.
What it trades
Grouped by tariff chapter, most published codes first. Descriptions are HMRC’s own, verbatim. This list is bounded: codes outside the loaded coverage are not listed.
inventory_2Chapter 70Published 2018-02 to 2026-036of 32 loaded codes19%
7007 29 00Laminated safety glass (excl. glass of size and shape suitable for incorporation in motor vehicles, aircraft, spacecraft, vessels or other vehicles, multiple-walled insulating units)Import14months published, 2021-06 to 2026-03
7016 90 70Slabs, squares, tiles and other articles of pressed or moulded glass, whether or not wired, of a kind used for building or construction purposes, and multicellular or foam glass in blocks, panels, plates, shells or similar forms (excl. laminated safety glass and multiple-walled insulating units of glass, and leaded lights and the like and blocks and bricks, of a kind used for building or constructImport7months published, 2021-08 to 2023-10
70Chapter-level link, no HMRC descriptionImportExport5months published, 2019-06 to 2022-08
Show the 6 sampled codesShow fewer codesexpand_moreexpand_less
7016 90 40Blocks and bricks, of a kind used for building or construction purposesImport4months published, 2019-07 to 2020-11
7016 90 10Leaded lights and the like (excl. such articles > 100 years old)Import
inventory_2Chapter 73Published 2018-05 to 2025-086of 32 loaded codes19%
7326 90 60Ventilators, non-mechanical, guttering, hooks and like articles used in the building industry, n.e.s., of iron or steelImportExport
inventory_2Chapter 39Published 2016-10 to 2025-075of 32 loaded codes16%
3920 63 00Plates, sheets, film, foil and strip, of non-cellular unsaturated polyesters, not reinforced, laminated, supported or similarly combined with other materials, without backing, unworked or merely surface-worked or merely cut into squares or rectangles (excl. those of poly"methyl methacrylate", self-adhesive products, and floor, wall and ceiling coverings of heading 3918)Import
inventory_2Chapter 72Published 2016-11 to 2025-084of 32 loaded codes13%
7219 33 90Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm, containing by weight < 2,5% nickelImport
inventory_2Chapter 83Published 2018-09 to 2025-073of 32 loaded codes9%
8302 41 90Base metal mountings and fittings suitable for buildings (excl. for doors, windows and French windows and locks with keys and hinges)Import
inventory_2Chapter 94Published 2022-06 to 2025-043of 32 loaded codes9%
9403 20 80Metal furniture (excl. for offices, medical, surgical, dental or veterinary furniture, beds and seats)Import1
inventory_2Chapter 84Published 2021-05 to 2025-082of 32 loaded codes6%
8431 31 00Parts of lifts, skip hoists or escalators, n.e.s.Import
inventory_2Chapter 44Published 2022-08 to 2023-041of 32 loaded codes3%
inventory_2Chapter 74Published 2018-06 to 2018-061of 32 loaded codes3%
7419 91 00Articles of copper, cast, moulded, stamped or forged, but not further worked, n.e.s.Import1
inventory_2Chapter 76Published 2018-02 to 2019-111of 32 loaded codes3%
7610 90 90Structures and parts of structures, of aluminium, n.e.s., and plates, rods, profiles, tubes and the like, prepared for use in structures, of aluminium, n.e.s. (excl. prefabricated buildings of heading 9406, doors and windows and their frames and thresholds for doors, bridges and bridge-sections, towers and lattice masts)Import
1months published, 2022-07 to 2022-07
12
months published, 2019-02 to 2023-07
7323 93 00Table, kitchen or other household articles, and parts thereof, of stainless steel (excl. cans, boxes and similar containers of heading 7310; waste baskets; shovels, corkscrews and other articles of the nature of a work implement; articles of cutlery, spoons, ladles, forks etc. of heading 8211 to 8215; ornamental articles; sanitary ware)Import4months published, 2019-07 to 2025-08
7308 90 98Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet)Import3months published, 2018-05 to 2018-07
7326 90 98Articles of iron or steel, n.e.s.Import3months published, 2019-04 to 2021-12
Show the 6 sampled codesShow fewer codesexpand_moreexpand_less
7318 15 48Screws and bolts, of iron or steel other than stainless "whether or not with their nuts and washers", without heads, with a tensile strength of >= 800 MPa (excl. screws and bolts for fixing railway track construction material)Import1months published, 2022-06 to 2022-06
7326 90 92Articles of iron or steel, open-die forged, n.e.s.Import1months published, 2021-07 to 2021-07
9
months published, 2019-01 to 2023-05
3921 90 43Plates, sheets, film, foil and strip, of laminated amino-resins, reinforced, laminated, supported or similarly combined with other materials, unworked or merely surface-worked or merely cut into squares or rectangles (excl. high-pressure laminates of amino-resins, with a decorative surface on one or both sides, and floor coverings)Import5months published, 2016-10 to 2017-11
3920 69 00Plates, sheets, film, foil and strip, of non-cellular polyesters, not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. polycarbonates, polythylene terephthalate and other unsaturated polyesters, self-adhesive products, and floor, wall and ceiling coverings in heading 3918)Import2months published, 2019-04 to 2020-07
3920 62 90Plates, sheets, film, foil and strip, of non-cellular poly"ethylene terephthalate", not reinforced, laminated, supported or similarly combined with other materials, without support, unworked or not further worked than surface-worked or merely cut into squares or rectangles, of a thickness of > 0,35 mm (excl. such self-adhesive products, and floor, wall and ceiling coverings of heading 3918)Import1months published, 2025-07 to 2025-07
Show the 5 sampled codesShow fewer codesexpand_moreexpand_less
3921 90 90Plates, sheets, film, foil and strip, of plastics, reinforced, laminated, supported or similarly combined with other materials, unworked or merely surface-worked or merely cut into squares or rectangles (excl. of cellular plastic, addition polymerization products, condensation polymerization products and rearrangement polymerization products; self-adhesive products and floor, wall and ceiling coveExport1months published, 2022-05 to 2022-05
18
months published, 2017-03 to 2025-06
7219 34 90Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm, containing by weight < 2,5% nickelImport11months published, 2018-02 to 2025-08
7219 90 80Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, non-perforatedImport3months published, 2016-11 to 2018-02
7219 34 10Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm, containing by weight >= 2,5% nickelImport2months published, 2018-12 to 2024-03
3
months published, 2022-02 to 2025-07
8302 49 00Base metal mountings, fittings and similar articles (excl. locks with keys, clasps and frames with clasps incorporating locks, hinges, castors and mountings and fittings suitable for buildings, motor vehicles or furniture)Import2months published, 2020-04 to 2020-10
8302 60 00Automatic door closers of base metalImport1months published, 2018-09 to 2018-09
months published, 2022-06 to 2022-06
9405 41 39Photovoltaic luminaires and lighting fittings, solely for light-emitting diode "LED" light sources, not of plastics, n.e.s.Export1months published, 2025-04 to 2025-04
9405 49 90Electric luminaires and lighting fittings, not of plastics, n.e.s.Import1months published, 2025-02 to 2025-02
22
months published, 2021-05 to 2025-08
8471 30 00Data-processing machines, automatic, portable, weighing <= 10 kg, consisting of at least a central processing unit, a keyboard and a display (excl. peripheral units)Import2months published, 2022-09 to 2022-11
2
months published, 2022-08 to 2023-04
months published, 2018-06 to 2018-06
2
months published, 2018-02 to 2019-11
FORMS AND SURFACES INC · Tradaro
On the same codes
Traders published against the most of the same codes. A shared code is a shared commodity, not a relationship between them.