A filled cell is a month with at least one published link in the loaded scope. A gap is a month with no published link, not a month without trade.
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
Published in 52 months between 2016-01 and 2026-07. Each published month is listed with its commodity code count in the table above.
at least one published link
no published link in this month
outside the loaded window
swap_horizPublished as both an importer and an exporter, against 30 commodity codes across 7 tariff chapters.
event_busyPublished in 52 of the 125 months from January 2016 to May 2026. A missing month is one with no published link, not a month without trade.
inventory_2Concentrated in chapter 84: 15 of the 30 loaded codes are in chapter 84.
north_eastThe chapter 39 codes are export only.
What it trades
Grouped by tariff chapter, most published codes first. Descriptions are HMRC’s own, verbatim. This list is bounded: codes outside the loaded coverage are not listed.
inventory_2Chapter 84Published 2016-01 to 2026-0515of 30 loaded codes50%
8479 90 70Parts of machines and mechanical appliances having individual functions, n.e.s. (excl. of cast iron or cast steel)ImportExport6months published, 2017-03 to 2024-02
8479 90 80Parts of machines and mechanical appliances having individual functions, n.e.s. (excl. of cast iron or cast steel)Export6months published, 2016-01 to 2016-10
8409 10 00Parts suitable for use solely or principally with internal combustion piston engine for aircraft, n.e.s.ImportExport5months published, 2016-09 to 2022-02
8409 99 00Parts suitable for use solely or principally with compression-ignition internal combustion piston engine "diesel or semi-diesel engine", n.e.s.ImportExport5months published, 2016-10 to 2024-01
Show the 15 sampled codesShow fewer codesexpand_moreexpand_less
8482 10 90Ball bearings with greatest external diameter > 30 mmImportExport3months published, 2023-04 to 2025-02
8482 99 00Parts of ball or roller bearings (excl. balls, needles and rollers), n.e.s.
inventory_2Chapter 85Published 2016-01 to 2020-125of 30 loaded codes17%
8505 11 00Permanent magnets of metal and articles intended to become permanent magnets after magnetization (excl. chucks, clamps and similar holding devices)ImportExport
inventory_2Chapter 73Published 2019-01 to 2023-053of 30 loaded codes10%
7326 90 98Articles of iron or steel, n.e.s.ImportExport
inventory_2Chapter 87Published 2017-02 to 2024-083of 30 loaded codes10%
8708 99 97Parts and accessories for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. of closed-die forged steel)ImportExport
inventory_2Chapter 88Published 2016-02 to 2021-032of 30 loaded codes7%
8803 30 00Parts of aeroplanes or helicopters, n.e.s. (excl. those for gliders)ImportExport
inventory_2Chapter 39Published 2025-08 to 2025-081of 30 loaded codes3%
3926 90 97Articles of plastics and articles of other materials of heading 3901 to 3914, n.e.s.Export1
inventory_2Chapter 90Published 2017-01 to 2017-011of 30 loaded codes3%
9018 50 10Ophthalmic instruments and appliances, non-optical, n.e.s.Export1
ImportExport
3months published, 2018-12 to 2022-12
8487 90 90Machinery parts of chapter 84, not intended for a specific purpose, n.e.s.ImportExport3months published, 2016-03 to 2019-03
8407 90 90Spark-ignition reciprocating or rotary piston engine, of a cylinder capacity > 250 cm , of a power > 10 kW (other than engines of subheading 8407.90.50, reciprocating piston engine of a kind used for the propulsion of vehicles of chapter 87, aircraft engines and marine propulsion engines)Export2months published, 2017-09 to 2026-03
8409 91 00Parts suitable for use solely or principally with spark-ignition internal combustion piston engine, n.e.s.Export1months published, 2025-03 to 2025-03
8411 91 00Parts of turbojets or turbopropellers, n.e.s.Export1months published, 2025-08 to 2025-08
8422 90 90Parts of packing or wrapping machinery and of other machinery of heading 8422, n.e.s. (excl. parts of dishwashing machines)Export1months published, 2016-01 to 2016-01
8481 80 69Gate valves for pipes, boiler shells, tanks, vats or the like (excl. of cast iron or steel, and taps, cocks and valves for sinks, washbasins, bidets, water cisterns, baths and similar fixtures and central heating radiator valves)Export1months published, 2023-08 to 2023-08
8482 10 10Ball bearings with greatest external diameter <= 30 mmImport1months published, 2026-05 to 2026-05
8483 30 80Plain shaft bearings for machineryImport1months published, 2025-04 to 2025-04
2
months published, 2016-04 to 2018-08
8505 19 10Permanent magnets of agglomerated ferriteImport2months published, 2016-08 to 2017-07
8501 64 00AC generators "alternators", of an output > 750 kVA (excl. photovoltaic generators)Import1months published, 2018-03 to 2018-03
8505 90 90Parts of permanent magnets, electromagnets, electromagnetic clutches, couplings, brakes and lifting heads, electromagnetic or permanent magnet holding devices, n.e.s.Import1months published, 2016-01 to 2016-01
Show the 5 sampled codesShow fewer codesexpand_moreexpand_less
8518 90 00Parts of microphones, loudspeakers, headphones and earphones, earphones, audio-frequency electric amplifiers or electric sound amplifier sets, n.e.s.Import1months published, 2020-12 to 2020-12
2
months published, 2019-10 to 2020-08
7312 90 00Plaited bands, slings and the like, of iron or steel (excl. electrically insulated products)Import1months published, 2019-01 to 2019-01
7319 90 90Knitting needles, bodkins, crochet hooks, embroidery stilettos and similar articles, of iron or steel (excl. sewing, darning or embroidery needles)Export1months published, 2023-05 to 2023-05
7
months published, 2017-02 to 2024-08
8703 90 00Motor cars and other vehicles principally designed for the transport of <10 persons, incl. station wagons and racing cars, with engines other than internal combustion piston engine or electric motor (excl. vehicles for the transport of persons on snow and other specially designed vehicles of subheading 8703.10)Export1months published, 2018-08 to 2018-08
8708 99 93Parts and accessories of closed-die forged steel, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s.Import1months published, 2022-03 to 2022-03
7
months published, 2016-02 to 2021-03
8803 10 00Propellers and rotors and parts thereof, for aircraft, n.e.s.Import1months published, 2016-05 to 2016-05
months published, 2025-08 to 2025-08
months published, 2017-01 to 2017-01
EYETECH ENGINEERING LTD · Tradaro
On the same codes
Traders published against the most of the same codes. A shared code is a shared commodity, not a relationship between them.