A filled cell is a month with at least one published link in the loaded scope. A gap is a month with no published link, not a month without trade.
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
Published in 99 months between 2016-01 and 2026-07. Each published month is listed with its commodity code count in the table above.
at least one published link
no published link in this month
outside the loaded window
swap_horizPublished as both an importer and an exporter, against 139 commodity codes across 16 tariff chapters.
event_busyPublished in 99 of the 127 months from January 2016 to July 2026. A missing month is one with no published link, not a month without trade.
scatter_plotSpread across 16 tariff chapters, none of them holding half the loaded codes.
south_westThe chapter 85 codes are import only.
What it trades
Grouped by tariff chapter, most published codes first. Descriptions are HMRC’s own, verbatim. This list is bounded: codes outside the loaded coverage are not listed.
inventory_2Chapter 84Published 2016-05 to 2026-0759of 139 loaded codes42%
8409 99 00Parts suitable for use solely or principally with compression-ignition internal combustion piston engine "diesel or semi-diesel engine", n.e.s.ImportExport61months published, 2021-01 to 2026-07
8474 90 90Parts of machinery of heading 8474 (excl. of cast iron or cast steel)ImportExport54months published, 2016-05 to 2026-07
8432 90 00Parts of agricultural, horticultural or forestry machinery for soil preparation or cultivation or of lawn or sports-ground rollers, n.e.s.Export37months published, 2021-01 to 2026-07
8411 99 00Parts of gas turbines, n.e.s.Export35months published, 2021-02 to 2026-02
Show the 59 sampled codesShow fewer codesexpand_moreexpand_less
8483 90 81Toothed wheels, chain sprockets and other transmission elements presented separately and parts of transmission shafts and cranks; bearing housings and plain shaft bearings; gears and gearing, ball or roller screws, gear boxes and other speed changers, flywheels and pulleys, clutches and shaft couplings, of cast iron or cast steel, n.e.s.ImportExport25months published, 2024-03 to 2026-07
inventory_2Chapter 73Published 2016-01 to 2026-0720of 139 loaded codes14%
7326 90 98Articles of iron or steel, n.e.s.ImportExport
inventory_2Chapter 85Published 2022-01 to 2026-0316of 139 loaded codes12%
8537 10 98Boards, cabinets and similar combinations of apparatus for electric control or the distribution of electricity, for a voltage <= 1.000 V (excl. switching apparatus for line telephony or line telegraphy, numerical control panels with built-in automatic data-processing machines, programmable memory controllers and touch screens)Import
inventory_2Chapter 39Published 2021-10 to 2026-079of 139 loaded codes6%
3923 10 90Boxes, cases, crates and similar articles for the conveyance or packaging of goods, of plastics (excl. special ones for semiconductor wafers, masks or reticles)Import
inventory_2Chapter 87Published 2020-12 to 2026-076of 139 loaded codes4%
8709 90 00Parts of self-propelled works trucks, not fitted with lifting or handling equipment, of the type used in factories, warehouses, dock areas or airports for short distance transport of goods, incl. tractors for railways station platforms, n.e.s.Export
inventory_2Chapter 44Published 2022-01 to 2026-025of 139 loaded codes4%
4415 20 20Pallets and pallet collars, of woodImport33
inventory_2Chapter 72Published 2022-01 to 2025-035of 139 loaded codes4%
7205 29 00Powders, of pig iron, spiegeleisen, iron or non-alloy steel (excl. powders of ferro-alloys and radioactive iron powders "isotopes")ImportExport
inventory_2Chapter 90Published 2023-01 to 2025-115of 139 loaded codes4%
9031 80 80Non-optical instruments, appliances and machines for measuring or checking, n.e.s. in Ch 90Import2
inventory_2Chapter 40Published 2022-01 to 2026-044of 139 loaded codes3%
4016 99 52Rubber-to-metal bonded parts of vulcanised rubber (excl. hard rubber), of a type intended exclusively or mainly for use in motor vehicles of heading 8701 to 8705 (excl. those of cellular rubber)Import
inventory_2Chapter 48Published 2022-03 to 2023-022of 139 loaded codes1%
4811 41 90Self-adhesive paper and paperboard, surface-coloured, surface-decorated or printed, in rolls or in square or rectangular sheets, of any size (excl. of a width of <= 10 cm coated with unvulcanised natural or synthetic rubber and goods of heading 4810)Export
inventory_2Chapter 82Published 2022-07 to 2026-052of 139 loaded codes1%
8209 00 80Plates, sticks, tips and the like for tools, unmounted, of sintered metal carbides or cermets (excl. indexable inserts)Import
inventory_2Chapter 83Published 2022-02 to 2026-062of 139 loaded codes1%
8310 00 00Sign-plates, nameplates, address-plates and similar plates, numbers, letters and other symbols, of base metal, incl. traffic signs (excl. those of heading 9405, type and the like, and signal boards, signal discs and signal arms for traffic of heading 8608)Import
inventory_2Chapter 38Published 2025-09 to 2025-091of 139 loaded codes1%
3824 99 65Auxiliary products for foundries in the form of chemical preparations (excl. prepared binders for foundry moulds or cores)Import
inventory_2Chapter 49Published 2023-08 to 2023-081of 139 loaded codes1%
4901 10 00Printed books, brochures and similar printed matter, in single sheets, whether or not folded (excl. periodicals and publications which are essentially devoted to advertising)Import
inventory_2Chapter 76Published 2022-07 to 2022-071of 139 loaded codes1%
7601 10 00Aluminium, not alloyed, unwroughtExport1
inventory_2Chapter 96Published 2024-08 to 2026-061of 139 loaded codes1%
9603 50 00Brushes constituting parts of machines, appliances or vehiclesImport5
Parts of machinery of heading 8474, of cast iron or cast steel
Import
10months published, 2016-07 to 2025-10
8474 80 90Machinery for agglomerating, shaping or moulding solid mineral fuels, unhardened cements, plastering materials and other mineral products in powder or paste form, and machines for forming foundry moulds of sand (excl. for ceramic paste, for the casting or pressing of glass, and machines for additive manufacturing)Import7months published, 2023-07 to 2025-09
8483 30 38Bearing housings not incorporating ball or roller bearings, for machinery and plain shaft bearings (excl. those for ball or roller bearings)Export6months published, 2024-07 to 2025-01
8412 31 00Pneumatic power engines and motors, linear-acting, "cylinders"Import5months published, 2023-01 to 2025-06
8424 20 00Spray guns and similar appliances (other than electrical machines, appliances and other devices for spraying molten metals or metal carbides of heading 8515, sand blasting machines and similar jet projecting machines)Import5months published, 2022-03 to 2024-12
8454 90 00Parts of converters, ladles, ingot moulds and casting machines of a kind used in metallurgy or in metal foundries, n.e.s.Import5months published, 2022-04 to 2026-01
8481 20 10Valves for the control of oleohydraulic power transmissionImport5months published, 2022-06 to 2026-05
8481 20 90Valves for the control of pneumatic power transmissionImport5months published, 2022-09 to 2026-02
8487 90 90Machinery parts of chapter 84, not intended for a specific purpose, n.e.s.Import5months published, 2024-03 to 2025-06
8421 39 85Machinery and apparatus for filtering or purifying gases other than air (excl. isotope separators, those using a catalytic process, those with stainless steel housing and with inlet and outlet tube bores with inside diameters <= 1,3 cm, and particulate filters for exhaust gases from internal combustion engines)Import4months published, 2025-02 to 2026-01
8474 10 00Sorting, screening, separating or washing machines for solid mineral substances, incl. those in powder or paste form (excl. centrifuges and filter presses)Import4months published, 2016-09 to 2025-07
8428 90 90Lifting, handling, loading or unloading machinery, n.e.s.Import3months published, 2025-01 to 2025-07
8431 20 00Parts of fork-lift trucks and other works trucks fitted with lifting or handling equipment, n.e.s.Import2months published, 2022-05 to 2022-07
8454 30 90Casting machines of a kind used in metallurgy or in metal foundries (excl. machines for casting under pressure)Import2months published, 2022-07 to 2025-05
8471 60 70Input or output units for automatic data-processing machines, whether or not containing storage units in the same housing (excl. keyboards)Import2months published, 2023-02 to 2023-08
8474 39 00Machinery for mixing or kneading solid mineral substances, incl. those in powder or paste form (excl. concrete and mortar mixers, machines for mixing mineral substances with bitumen and calenders)Import2months published, 2022-12 to 2025-03
8480 30 90Moulding patterns (excl. moulding patterns of graphite or other carbons and ceramic, glass or wooden moulding patterns)ImportExport2months published, 2023-11 to 2026-05
8481 90 00Parts of valves and similar articles for pipes, boiler shells, tanks, vats or the like, n.e.s.Import2months published, 2022-02 to 2023-11
8484 90 00Sets or assortments of gaskets and similar joints, dissimilar in composition, put up in pouches, envelopes or similar packingsImport2months published, 2024-03 to 2024-06
84Chapter-level link, no HMRC descriptionImport1months published, 2022-05 to 2022-05
8409 10 00Parts suitable for use solely or principally with internal combustion piston engine for aircraft, n.e.s.Import1months published, 2024-02 to 2024-02
8409 91 00Parts suitable for use solely or principally with spark-ignition internal combustion piston engine, n.e.s.Export1months published, 2021-01 to 2021-01
8413 11 00Pumps fitted or designed to be fitted with a measuring device, for dispensing fuel or lubricants, of the type used in filling stations or in garagesImport1months published, 2024-12 to 2024-12
8413 40 00Concrete pumpsImport1months published, 2022-08 to 2022-08
8413 50 40Dosing and proportioning reciprocating positive displacement pumps, power-drivenImport1months published, 2024-05 to 2024-05
8413 50 80Reciprocating positive displacement pumps, power-driven (excl. pumps of subheading 8413.11 and 8413.19, fuel, lubricating or cooling medium pumps for internal combustion piston engine, concrete pumps, hydraulic units, dosing pumps and general piston pumps)Import1months published, 2022-09 to 2022-09
8413 60 31Hydraulic fluid power gear pumps (excl. hydraulic units)Import1months published, 2025-01 to 2025-01
8413 92 00Parts of liquid elevators, n.e.s.Import1months published, 2022-05 to 2022-05
8414 59 25Axial fans (excl. table, floor, wall, window, ceiling or roof fans, with a self-contained electric motor of an output <= 125 W, and fans for cooling IT equipment of 8414 59 15)Import1months published, 2025-12 to 2025-12
8414 59 35Centrifugal fans (excl. table, floor, wall, window, ceiling or roof fans, with a self-contained electric motor of an output <= 125 W, and fans for cooling IT equipment of 8414 59 15)Import1months published, 2025-07 to 2025-07
8416 20 10Furnace burners, only for gas, monobloc, incorporating a ventilator and a control deviceImport1months published, 2025-08 to 2025-08
8416 20 80Furnace burners for pulverised solid fuel or gas (excl. such products only for gas, monobloc, incorporating a ventilator and a control device and combination burners)Import1months published, 2025-08 to 2025-08
8419 90 15Parts of medical, surgical or laboratory sterilizers, n.e.s.Export1months published, 2021-02 to 2021-02
8422 90 90Parts of packing or wrapping machinery and of other machinery of heading 8422, n.e.s. (excl. parts of dishwashing machines)Import1months published, 2025-11 to 2025-11
8423 90 90Weighing machine weights of all kinds; parts of weighing machinery, n.e.s.Import1months published, 2023-01 to 2023-01
8424 30 90Steam or sand blasting machines and similar jet projecting machines (excl. compressed air operated and water cleaning appliances with built-in motor and appliances for cleaning special containers)Import1months published, 2022-11 to 2022-11
8424 90 80Parts of fire extinguishers, spray guns and similar appliances, steam or sand blasting machines and similar jet projecting machines and machinery and apparatus for projecting, dispersing or spraying liquids or powders, n.e.s.Import1months published, 2023-03 to 2023-03
8431 10 00Parts of pulley tackles and hoists (other than skip hoists), winches, capstans and jacks, n.e.s.Import1months published, 2026-06 to 2026-06
8432 29 90Weeders and hoes for use in agriculture, horticulture and forestry (excl. rotovators)Export1months published, 2021-02 to 2021-02
8471 49 00Data-processing machines, automatic, presented in the form of systems "comprising at least a central processing unit, one input unit and one output unit" (excl. portable weighing <= 10 kg and excl. peripheral units)Import1months published, 2023-06 to 2023-06
8471 50 00Processing units for automatic data-processing machines, whether or not containing in the same housing one or two of the following types of unit: storage units, input units, output units (excl. those of heading 8471.41 or 8471.49 and excl. peripheral units)Import1months published, 2025-09 to 2025-09
8471 70 50Hard disk storage drives for automatic data-processing machines, neither optical nor magneto-optical (excl. central storage units)Import1months published, 2025-01 to 2025-01
8474 80 10Machinery for agglomerating, shaping or moulding ceramic pasteImport1months published, 2023-01 to 2023-01
8480 10 00Moulding boxes for metal foundryImport1months published, 2024-08 to 2024-08
8480 49 00Moulds for metal or metal carbides (excl. moulds of graphite or other carbons, ceramic or glass moulds, linotype moulds or matrices, injection or compression-type moulds and ingot moulds)Import1months published, 2026-01 to 2026-01
8481 80 73Globe valves of steel (excl. temperature regulators, pressure-reducing valves, valves for the control of oleohydraulic or pneumatic power transmission, check valves and safety or relief valves, process control valves, taps, cocks and valves for sinks, washbasins, bidets, water cisterns, baths and similar fixtures, and central heating radiator valves)Import1months published, 2022-07 to 2022-07
8481 80 85Butterfly valves for pipes, boiler shells, tanks, vats or the like (excl. check valves)Import1months published, 2026-03 to 2026-03
8482 50 00Cylindrical roller bearings, incl. cage and roller assemblies (excl. bearings of 8482 10 to 8482 40)Import1months published, 2026-07 to 2026-07
8483 10 95Main shafts or driving shafts, counter shafts, cam shafts, eccentric shafts and other transmission shafts (excl. cranks, crank shafts and articulated shafts)Import1months published, 2026-01 to 2026-01
8483 40 21Spur and helical gears and gearing, for machinery (excl. friction gears, gear boxes and other speed changers)Import1months published, 2025-02 to 2025-02
8483 40 23Bevel and bevel-spur gears and gearing, for machinery (excl. friction gears, gear boxes and other speed changers)Import1months published, 2023-08 to 2023-08
8483 40 90Gears and gearing, for machinery (excl. ball or roller screws and gears and gearing in general, and toothed wheels, chain sprockets and other transmission elements presented separately)Import1months published, 2023-01 to 2023-01
8483 60 20Clutches and shaft couplings, incl. universal joints, of cast iron or cast steelImport1months published, 2023-01 to 2023-01
80
months published, 2018-02 to 2026-07
7325 99 90Articles of cast steel, n.e.s. (excl. grinding balls and similar articles for mills)ImportExport61months published, 2016-10 to 2026-07
7325 10 00Articles of non-malleable cast iron, n.e.s.ImportExport47months published, 2021-02 to 2026-07
7303 00 90Tubes, pipes and hollow profiles, of cast iron (excl. products of a kind used in pressure systems)Export42months published, 2021-10 to 2025-10
Show the 20 sampled codesShow fewer codesexpand_moreexpand_less
7326 90 40Pallets and similar platforms for handling goods, of iron or steelImportExport41months published, 2021-02 to 2026-07
7302 90 00Sleepers "cross-ties", check-rails, rack rails, chairs, chair wedges, rail clips, bedplates and ties and other specialised material for the jointing or fixing of railway or tramway track, of iron or steel (excl. rails, switch blades, crossing frogs, point rods and other crossing pieces, and fish-plates and sole plates)ImportExport38months published, 2016-01 to 2026-07
7308 90 98Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet)ImportExport8months published, 2023-07 to 2025-12
7306 90 00Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm)Import6months published, 2025-02 to 2026-06
7307 91 00Flanges of iron or steel (excl. cast or stainless products)Import4months published, 2022-05 to 2025-10
7325 99 10Articles of cast iron, n.e.s. (excl. of non-malleable cast iron, and grinding balls and similar articles for mills)ImportExport4months published, 2021-01 to 2022-01
7304 39 83Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. cold-drawn or cold-rolled, of cast iron, line pipe of a kind used for oil or gas pipelines, casing, tubing and drill pipe of a kind used in drilling for oil or gas and tubes, and gas pipes of subheading 7304 39 50)Import3months published, 2022-03 to 2025-05
7307 19 10Tube or pipe fittings of cast iron (excl. of non-malleable)Import2months published, 2023-12 to 2024-12
7307 19 90Cast tube or pipe fittings of steelImport2months published, 2023-09 to 2025-07
7318 19 00Threaded articles, of iron or steel, n.e.s.ImportExport2months published, 2022-11 to 2023-12
7326 90 96Sintered articles of iron or steel, n.e.s.Export2months published, 2023-08 to 2024-11
7302 30 00Switch blades, crossing frogs, point rods and other crossing pieces, for railway or tramway track, of iron or steelExport1months published, 2018-05 to 2018-05
7307 29 10Threaded tube or pipe fittings of stainless steel (excl. cast products, flanges, elbows, bends and sleeves)Import1months published, 2024-11 to 2024-11
7314 14 00Woven cloth, incl. endless bands, of stainless steel wire (excl. woven products of metal fibres of a kind used for cladding, lining or similar purposes and endless bands for machinery)Import1months published, 2026-06 to 2026-06
7318 15 95Screws and bolts, of iron or steel "whether or not with their nuts and washers", with heads (excl. with slotted, cross-recessed or hexagonal head; wood screws, self-tapping screws and screws and bolts for fixing railway track construction material, screw hooks and screw rings)Import1months published, 2022-07 to 2022-07
7326 11 00Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further workedExport1months published, 2021-01 to 2021-01
6
months published, 2022-09 to 2025-07
8536 50 19Switches for a voltage of <= 60 V (excl. relays, push-button switches and rotary switches)Import3months published, 2022-09 to 2025-06
8501 52 20AC motors, multi-phase, of an output > 750 W but <= 7,5 kWImport2months published, 2022-11 to 2023-01
8501 52 30AC motors, multi-phase, of an output > 7,5 kW but <= 37 kWImport2months published, 2023-01 to 2023-08
Show the 16 sampled codesShow fewer codesexpand_moreexpand_less
8517 62 00Machines for the reception, conversion and transmission or regeneration of voice, images or other data, incl. switching and routing apparatus (excl. telephone sets, telephones for cellular networks or for other wireless networks)Import2months published, 2023-01 to 2023-08
8536 90 95Electrical apparatus for making connections to or in electrical circuits, for a voltage <= 1.000 V (excl. fuses, circuit breakers and other apparatus for protecting electrical circuits, relays and other switches, lamp holders, plugs and sockets, prefabricated elements for electrical circuits, connections and contact elements for wire and cables, and car battery clamps)Import2months published, 2022-01 to 2022-05
8537 10 91Programmable memory controllers (excl. numerical control panels with built-in automatic data-processing machines)Import2months published, 2023-08 to 2023-12
8538 90 91Electronic assemblies for electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits of heading 8535 or 8536 and for control desks, cabinets and similar combinations of apparatus of heading 8537 (excl. for wafer probers)Import2months published, 2023-01 to 2023-08
8501 10 91Universal AC-DC motors of an output <= 37,5 WImport1months published, 2025-05 to 2025-05
8504 40 85Inverters having power handling capacity <= 7,5 kVAImport1months published, 2023-08 to 2023-08
8504 40 86Inverters having power handling capacity > 7,5 kVAImport1months published, 2023-08 to 2023-08
8504 40 95Static converters (excl. accumulator chargers, rectifiers, and inverters)Import1months published, 2023-08 to 2023-08
8504 90 90Parts of static converters, n.e.s.Import1months published, 2023-08 to 2023-08
8525 89 00Television cameras, digital cameras and video camera recorders (excl. high-speed, radiation-hardened or radiation-tolerant, and night vision goods)Import1months published, 2023-01 to 2023-01
8536 20 10Automatic circuit breakers for a voltage <= 1.000 V, for a current <= 63 AImport1months published, 2026-03 to 2026-03
8536 69 90Plugs and sockets for a voltage of <= 1.000 V (excl. those for coaxial cables and printed circuits)Import1months published, 2023-11 to 2023-11
42
months published, 2021-10 to 2026-07
3921 19 00Plates, sheets, film, foil and strip, of cellular plastic, unworked or merely surface-worked or merely cut into squares or rectangles (excl.those of polymers of styrene, vinyl chloride, polyurethanes and regenerated cellulose, self-adhesive products, floor, wall and ceiling coverings of heading 3918 and sterile surgical or dental adhesion barriers of subheading 3006.10.30)Import6months published, 2022-07 to 2025-02
3923 10 10Boxes, cases, crates and similar articles, of plastic, specially shaped or fitted for the conveyance or packing of semiconductor wafers, masks, or reticlesImport5months published, 2022-02 to 2023-04
3923 90 00Articles for the conveyance or packaging of goods, of plastics (excl. boxes, cases, crates and similar articles; sacks and bags, incl. cones; carboys, bottles, flasks and similar articles; spools, spindles, bobbins and similar supports; stoppers, lids, caps and other closures)Import3months published, 2023-10 to 2024-03
Show the 9 sampled codesShow fewer codesexpand_moreexpand_less
3921 14 00Plates, sheets, film, foil and strip, of regenerated cellular cellulose, unworked or merely surface-worked or merely cut into squares or rectangles (excl. self-adhesive products, floor, wall and ceiling coverings of heading 3918 and sterile surgical or dental adhesion barriers of subheading 3006.10.30)Import2months published, 2025-03 to 2026-03
3917 29 00Rigid tubes, pipes and hoses, of plastics (excl. those of polymers of ethylene, propylene and vinyl chloride)Import1months published, 2026-06 to 2026-06
3917 39 00Flexible tubes, pipes and hoses, of plastics, reinforced or otherwise combined with other materials (excl. those with a burst pressure of >= 27,6 MPa)Import1months published, 2025-05 to 2025-05
3920 20 80Plates, sheets, film, foil and strip, of non-cellular polymers of propylene, not reinforced, laminated, supported or similarly combined with other materials, not further worked or only surface-worked and not cut to shapes other than rectangular "incl. square" of a thickness of > 0,10 mm, n.e.s.Import1months published, 2026-06 to 2026-06
3921 90 90Plates, sheets, film, foil and strip, of plastics, reinforced, laminated, supported or similarly combined with other materials, unworked or merely surface-worked or merely cut into squares or rectangles (excl. of cellular plastic, addition polymerization products, condensation polymerization products and rearrangement polymerization products; self-adhesive products and floor, wall and ceiling coveImport1months published, 2024-02 to 2024-02
51
months published, 2020-12 to 2025-11
8708 92 35Silencers "mufflers" and exhaust pipes, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.92.20)Export25months published, 2021-02 to 2026-07
8708 99 97Parts and accessories for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. of closed-die forged steel)ImportExport22months published, 2022-04 to 2026-07
8716 90 90Parts of trailers, semi-trailers and other vehicles not mechanically propelled, n.e.s. (excl. chassis, bodies and axles)Export14months published, 2021-02 to 2025-11
Show the 6 sampled codesShow fewer codesexpand_moreexpand_less
8709 19 90Works trucks, self-propelled, not fitted with lifting or handling equipment, of the type used in factories, warehouses, dock areas or airports for short distance transport of goods, incl. tractors for railways station platforms (excl. vehicles specially designed for the transport of highly radioactive materials and electrical trucks)Export2months published, 2021-02 to 2022-08
8708 29 90Parts and accessories for the industrial assembly of bodies of: tractors, motor vehicles for the transport of >= 10 persons, motor cars and vehicles principally designed for the transport of persons, motor vehicles for the transport of goods, special purpose motor vehicles (excl. bumpers and parts thereof, safety seat belts, front windscreens "windshields", rear windows and other windows and partsExport1months published, 2022-10 to 2022-10
months published, 2022-01 to 2026-02
4410 12 90Oriented strand board "OSB" of wood (excl. unworked or not further worked than sanded)Import18months published, 2022-05 to 2025-08
4408 10 15Sheets for veneering, incl. those obtained by slicing laminated wood, for coniferous plywood or for other similar laminated coniferous wood and other coniferous wood, sawn lengthwise, sliced or peeled, of a thickness of <= 6 mm, planed, sanded or end-jointedImport1months published, 2022-03 to 2022-03
4410 12 10Oriented strand "OSB", of wood, unworked or not further worked than sandedImport1months published, 2026-02 to 2026-02
Show the 5 sampled codesShow fewer codesexpand_moreexpand_less
4412 31 90Plywood consisting solely of sheets of wood <= 6 mm thick, with at least one outer ply of tropical wood (excl. with an outer ply of okoum , dark red meranti, light red meranti, white lauan, sipo, limba, obeche, acajou d'Afrique, sapelli, virola, mahogany "Swietenia spp.", palissandre de Rio, palissandre de Para or palissandre de Rose, sheets of compressed wood, cellular wood panels, inlaid wood anImport1months published, 2026-02 to 2026-02
2
months published, 2022-09 to 2022-11
7207 19 12Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous castingExport2months published, 2024-09 to 2025-03
7205 10 00Granules, of pig iron, spiegeleisen, iron or steel (excl. granules of ferro-alloys, turnings and filings of iron or steel, certain small calibre items, defective balls for ball-bearings)Import1months published, 2022-01 to 2022-01
7207 19 80Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon (excl. semi-products, of square, rectangular, circular or polygonal cross-section)Import1months published, 2022-01 to 2022-01
Show the 5 sampled codesShow fewer codesexpand_moreexpand_less
7225 99 00Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon-electrical steel)Export1months published, 2022-03 to 2022-03
months published, 2023-02 to 2025-11
9024 80 00Machines and appliances for testing the mechanical properties of materials (excl. metals)Import1months published, 2024-11 to 2024-11
9025 19 00Thermometers and pyrometers, not combined with other instruments (excl. liquid-filled thermometers for direct reading)Import1months published, 2025-11 to 2025-11
9027 90 00Microtomes; parts and accessories of instruments and apparatus for physical or chemical analysis, instruments and apparatus for measuring or checking viscosity, porosity, expansion, surface tension or the like, instruments and apparatus for measuring or checking quantities of heat, sound or light, and of microtomes, n.e.s.Import1months published, 2025-04 to 2025-04
Show the 5 sampled codesShow fewer codesexpand_moreexpand_less
9031 49 90Optical instruments, appliances and machines for measuring or checking, not elsewhere specified or included in chapter 90Import1months published, 2023-01 to 2023-01
4
months published, 2022-01 to 2023-10
4009 31 00Tubes, pipes and hoses, of vulcanised rubber (excl. hard rubber), reinforced or otherwise combined only with textile materials, without fittingsImport2months published, 2023-10 to 2025-05
4009 21 00Tubes, pipes and hoses, of vulcanised rubber (excl. hard rubber), reinforced or otherwise combined only with metal, without fittingsImport1months published, 2026-04 to 2026-04
4016 93 00Gaskets, washers and other seals, of vulcanised rubber (excl. hard rubber and those of cellular rubber)Import1months published, 2024-09 to 2024-09
1
months published, 2023-02 to 2023-02
4819 10 00Cartons, boxes and cases, of corrugated paper or paperboardImport1months published, 2022-03 to 2022-03
8
months published, 2022-07 to 2026-05
8207 90 91Tools, interchangeable, for use in mechanical or non-mechanical hand-held appliances, or for machine tools, for working metal, with working parts of materials other than diamond, agglomerated diamond, sintered metal carbide or cermets, n.e.s.Import2months published, 2023-11 to 2024-09
7
months published, 2022-02 to 2026-06
8302 20 00Castors with mountings of base metalImport1months published, 2026-02 to 2026-02
1
months published, 2025-09 to 2025-09
1
months published, 2023-08 to 2023-08
months published, 2022-07 to 2022-07
months published, 2024-08 to 2026-06
WILLIAM LEE LTD · Tradaro
On the same codes
Traders published against the most of the same codes. A shared code is a shared commodity, not a relationship between them.