A filled cell is a month with at least one published link in the loaded scope. A gap is a month with no published link, not a month without trade.
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
Published in 57 months between 2016-01 and 2026-07. Each published month is listed with its commodity code count in the table above.
at least one published link
no published link in this month
outside the loaded window
swap_horizPublished as both an importer and an exporter, against 43 commodity codes across 6 tariff chapters.
event_busyPublished in 57 of the 116 months from December 2016 to July 2026. A missing month is one with no published link, not a month without trade.
scatter_plotSpread across 6 tariff chapters, none of them holding half the loaded codes.
south_westThe chapter 39 codes are import only.
What it trades
Grouped by tariff chapter, most published codes first. Descriptions are HMRC’s own, verbatim. This list is bounded: codes outside the loaded coverage are not listed.
inventory_2Chapter 85Published 2021-01 to 2026-0721of 43 loaded codes49%
8503 00 91Parts suitable for use solely or principally with electric motors and generators, electric generating sets and rotary converters, n.e.s., of cast iron or cast steelImportExport16months published, 2022-12 to 2026-05
8501 61 20AC generators "alternators", of an output <= 7,5 kVA (excl. photovoltaic generators)ImportExport15months published, 2022-03 to 2026-07
8501 61 80AC generators "alternators", of an output > 7,5 kVA but <= 75 kVA (excl. photovoltaic generators)ImportExport13months published, 2021-01 to 2026-02
8501 62 00AC generators "alternators", of an output > 75 kVA but <= 375 kVA (excl. photovoltaic generators)ImportExport12months published, 2021-10 to 2026-06
Show the 21 sampled codesShow fewer codesexpand_moreexpand_less
8503 00 99Parts suitable for use solely or principally with electric motors and generators, electric generating sets and rotary converters, n.e.s. (excl. non-magnetic retaining rings and of cast iron or cast steel)ImportExport9months published, 2021-11 to 2024-04
inventory_2Chapter 40Published 2022-09 to 2026-051of 43 loaded codes2%
4016 99 91Rubber-to-metal bonded parts of vulcanised rubber (excl. hard rubber and those of cellular rubber and those of a type intended exclusively or mainly for use in motor vehicles of heading 8701 to 8705)Import
inventory_2Chapter 73Published 2022-12 to 2022-121of 43 loaded codes2%
7318 15 82Hexagon screws and bolts, of iron or steel other than stainless "whether or not with their nuts and washers", with a tensile strength of < 800 MPa (excl. with socket head, wood screws, self-tapping screws and screws and bolts for fixing railway track construction material)Import
inventory_2Chapter 90Published 2016-12 to 2026-071of 43 loaded codes2%
9032 89 00Regulating or controlling instruments and apparatus (excl. hydraulic or pneumatic, manostats, thermostats, and taps, cocks and valves of heading 8481)ImportExport
AC generators "alternators", of an output > 375 kVA but <= 750 kVA (excl. photovoltaic generators)
ImportExport
5months published, 2024-02 to 2026-02
8501 33 00DC motors and DC generators of an output > 75 kW but <= 375 kW (excl. photovoltaic generators)Import2months published, 2024-04 to 2025-06
8501 64 00AC generators "alternators", of an output > 750 kVA (excl. photovoltaic generators)ImportExport2months published, 2025-09 to 2026-01
8503 00 98Parts suitable for use solely or principally with electric motors and generators, electric generating sets and rotary converters, n.e.s. (excl. non-magnetic retaining rings, steel laminations and stator and rotor cores and of cast iron or cast steel)Import2months published, 2025-01 to 2025-07
8501 20 00Universal AC-DC motors of an output > 37,5 WExport1months published, 2025-03 to 2025-03
8501 52 20AC motors, multi-phase, of an output > 750 W but <= 7,5 kWImport1months published, 2024-05 to 2024-05
8501 53 81AC motors, multi-phase, of an output of > 75 kW but <= 375 kW (excl. traction motors)Import1months published, 2022-02 to 2022-02
8502 39 80Generating sets, non-wind-powered and non-powered by spark-ignition internal combustion piston engine (excl. turbogenerators)Import1months published, 2026-04 to 2026-04
8504 40 30Static converters of a kind used with telecommunication apparatus, automatic data-processing machines and units thereofExport1months published, 2022-10 to 2022-10
8504 40 85Inverters having power handling capacity <= 7,5 kVAImport1months published, 2025-01 to 2025-01
8504 90 90Parts of static converters, n.e.s.Import1months published, 2023-03 to 2023-03
8511 90 00Parts of electrical ignition or starting equipment, generators, etc. of heading 8511, n.e.s.Export1months published, 2022-09 to 2022-09
8541 10 00Diodes (excl. photosensitive or light emitting diodes "LED")Import1months published, 2022-10 to 2022-10
8541 90 00Parts of diodes, transistors and similar semiconductor devices; photosensitive semiconductor devices, light emitting diodes and mounted piezoelectric crystals, n.e.s.Export1months published, 2023-08 to 2023-08
8544 42 90Electric conductors, for a voltage <= 1.000 V, insulated, fitted with connectors, n.e.s. (other than of a kind used for telecommunications)Export1months published, 2025-11 to 2025-11
8544 49 95Electric conductors for a voltage > 80 V but < 1.000 V, insulated, not fitted with connectors, n.e.s. (excl. winding wire, coaxial conductors, wiring sets for vehicles, aircraft or ships, and wire and cables with individual conductor wires of a diameter > 0,51 mm)Import1months published, 2026-06 to 2026-06
28
months published, 2022-03 to 2026-07
8413 91 00Parts of pumps for liquids, n.e.s.Import1months published, 2025-02 to 2025-02
8414 90 00Parts of: air or vacuum pumps, air or other gas compressors, fans and ventilating or recycling hoods incorporating a fan, and gas-tight biological safety cabinets, n.e.s.Import1months published, 2025-07 to 2025-07
8418 10 20Combined refrigerator-freezers, of a capacity > 340 l, fitted with separate external doors or drawers or combinations thereofImport1months published, 2022-11 to 2022-11
Show the 17 sampled codesShow fewer codesexpand_moreexpand_less
8427 20 11Rough terrain fork-lift and other stacking trucks, self-propelled, with a lifting height >= 1 mImport1months published, 2023-03 to 2023-03
8427 90 00Works trucks fitted with lifting or handling equipment, not self-propelledImport1months published, 2023-03 to 2023-03
8428 90 90Lifting, handling, loading or unloading machinery, n.e.s.Import1months published, 2023-03 to 2023-03
8437 90 00Parts of machinery used in the milling industry or for the working of cereals or dried leguminous vegetables or machines for cleaning, sorting or grading seed, grain or dried leguminous vegetables, n.e.s.Import1months published, 2023-03 to 2023-03
8471 49 00Data-processing machines, automatic, presented in the form of systems "comprising at least a central processing unit, one input unit and one output unit" (excl. portable weighing <= 10 kg and excl. peripheral units)Import1months published, 2017-12 to 2017-12
8474 90 90Parts of machinery of heading 8474 (excl. of cast iron or cast steel)Export1months published, 2025-01 to 2025-01
8479 81 00Machinery for treating metal, incl. electric wire coil-winders, n.e.s. (excl. industrial robots, furnaces, dryers, spray guns and the like, high-pressure cleaning equipment and other jet cleaners, rolling millls or machines, machine tools and rope or cable-making machines)Import1months published, 2019-06 to 2019-06
8483 30 32Bearing housings for machinery, for ball or roller bearingsExport1months published, 2023-01 to 2023-01
8483 40 51Gear boxes for machineryImport1months published, 2023-10 to 2023-10
8483 60 20Clutches and shaft couplings, incl. universal joints, of cast iron or cast steelImport1months published, 2024-07 to 2024-07
8483 90 81Toothed wheels, chain sprockets and other transmission elements presented separately and parts of transmission shafts and cranks; bearing housings and plain shaft bearings; gears and gearing, ball or roller screws, gear boxes and other speed changers, flywheels and pulleys, clutches and shaft couplings, of cast iron or cast steel, n.e.s.Import1months published, 2023-10 to 2023-10
8483 90 89Toothed wheels, chain sprockets and other transmission elements presented separately and parts of transmission shafts and cranks; bearing housings and plain shaft bearings; gears and gearing, ball or roller screws, gear boxes and other speed changers, flywheels and pulleys, clutches and shaft couplings, n.e.s. (excl. of cast iron or cast steel)Import1months published, 2025-11 to 2025-11
months published, 2024-06 to 2026-05
3926 90 97Articles of plastics and articles of other materials of heading 3901 to 3914, n.e.s.Import1months published, 2022-12 to 2022-12
5
months published, 2022-09 to 2026-05
1
months published, 2022-12 to 2022-12
26
months published, 2016-12 to 2026-07
CABEL UK LTD · Tradaro
On the same codes
Traders published against the most of the same codes. A shared code is a shared commodity, not a relationship between them.