Published trader · United Kingdom

KORBER TECHNOLOGIES LIMITED

ImporterExporter

Directory snapshot: 2026-09-12. Address observation date, not a trade date.

HMRC trader directory · ref 4595 · published 2026-07 to 2026-07

64Commodity codes
1Months published
72Published links
2026-07First published
2026-07Last published

Months published

Commodity codes HMRC published this trader against, month by month, within the loaded coverage. A gap is a month with no published link in that coverage, not a month without trade.

2026-072026-07

Commodity codes on the record

Codes in the loaded coverage this trader is published against, most months first. Descriptions are HMRC’s own, verbatim. This list is bounded; codes outside the loaded coverage are not listed.

Commodity codeDescription (as published)DirectionMonthsWindow
3917 32 00Flexible tubes, pipes and hoses of plastics, not reinforced or otherwise combined with other materials, without fittingsExporter12026-07 – 2026-07
3921 90 90Plates, sheets, film, foil and strip, of plastics, reinforced, laminated, supported or similarly combined with other materials, unworked or merely surface-worked or merely cut into squares or rectangles (excl. of cellular plastic, addition polymerization products, condensation polymerization products and rearrangement polymerization products; self-adhesive products and floor, wall and ceiling coveImporterExporter12026-07 – 2026-07
3926 90 97Articles of plastics and articles of other materials of heading 3901 to 3914, n.e.s.ImporterExporter12026-07 – 2026-07
4010 31 00Endless transmission belts of trapezoidal cross-section "V-belts", of vulcanised rubber, V-ribbed, of an outside circumference > 60 cm but <= 180 cmExporter12026-07 – 2026-07
4016 93 00Gaskets, washers and other seals, of vulcanised rubber (excl. hard rubber and those of cellular rubber)Importer12026-07 – 2026-07
4016 99 91Rubber-to-metal bonded parts of vulcanised rubber (excl. hard rubber and those of cellular rubber and those of a type intended exclusively or mainly for use in motor vehicles of heading 8701 to 8705)Exporter12026-07 – 2026-07
4016 99 97Articles of vulcanised rubber, n.e.s. (excl. hard rubber and those of cellular rubber)Importer12026-07 – 2026-07
5910 00 00Transmission or conveyor belts or belting, of textile material, whether or not impregnated, coated, covered or laminated with plastics, or reinforced with metal or other material (excl. those of a thickness of < 3 mm and of indeterminate length or cut to length only, and those impregnated, coated, covered or laminated with rubber or made of yarn or cord impregnated or coated with rubber)ImporterExporter12026-07 – 2026-07
6804 22 30Millstones, grindstones, grinding wheels and the like, without frameworks, for sharpening, polishing, trueing or cutting, of artificial abrasives, with binder of ceramics or silicates (excl. of agglomerated synthetic or natural diamond, hand sharpening or polishing stones, perfumed pumice stones, and grinding wheels etc. specifically for dental drill engines)ImporterExporter12026-07 – 2026-07
6804 30 00Hand sharpening or polishing stonesExporter12026-07 – 2026-07
7315 11 90Roller chain of iron or steel (excl. roller chain of a kind used for cycles and motorcycles)Exporter12026-07 – 2026-07
7315 82 00Welded link chain of iron or steel (excl. articulated link chain, skid chain and stud-link chain)Exporter12026-07 – 2026-07
7326 90 98Articles of iron or steel, n.e.s.ImporterExporter12026-07 – 2026-07
7616 99 90Articles of aluminium, uncast, n.e.s.Exporter12026-07 – 2026-07
8207 90 10Interchangeable tools for hand tools, whether or not power-operated, or for machine tools, with working parts of diamond or agglomerated diamond, n.e.s.Exporter12026-07 – 2026-07
8207 90 30Screwdriver bits of base metalExporter12026-07 – 2026-07
8208 90 00Knives and cutting blades, of base metal, for machines or for mechanical appliances (excl. those for metal or wood-working, kitchen appliances or machines used by the food industry and those for agricultural, horticultural or forestry machines)Exporter12026-07 – 2026-07
8211 94 00Blades of base metal for table knives, pocket knives and other knives of heading 8211Exporter12026-07 – 2026-07
8412 21 20Hydraulic systems, linear acting "cylinders"Exporter12026-07 – 2026-07
8412 31 00Pneumatic power engines and motors, linear-acting, "cylinders"Exporter12026-07 – 2026-07
8412 39 00Pneumatic power engines and motors (excl. linear acting)Exporter12026-07 – 2026-07
8413 60 80Rotary positive displacement pumps, power-driven (excl. pumps of subheading 8413.11 and 8413.19, fuel, lubricating or cooling medium pumps for internal combustion piston engine, concrete pumps, gear pumps, vane pumps, screw pumps and hydraulic units)Exporter12026-07 – 2026-07
8414 10 25Rotary piston vacuum pumps, sliding vane rotary pumps, molecular drag pumps and Roots pumps (excl. pumps used in semiconductor or flat panel display production)Exporter12026-07 – 2026-07
8414 90 00Parts of: air or vacuum pumps, air or other gas compressors, fans and ventilating or recycling hoods incorporating a fan, and gas-tight biological safety cabinets, n.e.s.Exporter12026-07 – 2026-07
8419 39 00Dryers (excl. lyophilisation apparatus, freeze drying units, spray dryers, dryers for agricultural products, for wood, paper pulp, paper or paperboard, for yarns, fabrics and other textile products, dryers for bottles or other containers, hairdryers, hand dryers and domestic appliances)Exporter12026-07 – 2026-07
8419 90 85Parts of machinery, plant and laboratory equipment, whether or not electrically heated, for the treatment of materials by a process involving a change of temperature, and of non-electric instantaneous and storage water heaters, n.e.s. (excl. of medical, surgical or laboratory sterilizers, those for the manufacture of semiconductor boules or wafers, semiconductor devices, electronic integrated circExporter12026-07 – 2026-07
8421 39 25Machinery and apparatus for filtering or purifying air (excl. intake air filters for internal combustion engines, and those with stainless steel housing and with inlet and outlet tube bores with inside diameters <= 1,3 cm)Exporter12026-07 – 2026-07
8421 99 90Parts of machinery and apparatus for filtering or purifying liquids or gases, n.e.s.Exporter12026-07 – 2026-07
8425 49 00Jacks and hoists of a kind used for raising vehicles, not hydraulicExporter12026-07 – 2026-07
8431 39 00Parts of machinery of heading 8428, n.e.s.Exporter12026-07 – 2026-07
8474 90 90Parts of machinery of heading 8474 (excl. of cast iron or cast steel)Importer12026-07 – 2026-07
8478 90 00Parts of machinery for preparing or making up tobacco, n.e.s.ImporterExporter12026-07 – 2026-07
8481 20 90Valves for the control of pneumatic power transmissionExporter12026-07 – 2026-07
8481 40 10Safety or relief valves of cast iron or of steelExporter12026-07 – 2026-07
8481 80 59Process control valves (excl. temperature regulators, pressure-reducing valves, valves for the control of oleohydraulic or pneumatic power transmission, check valves and safety or relief valves, taps, cocks and valves for sinks, washbasins, bidets, water cisterns, baths and similar fixtures and central heating radiator valves)Exporter12026-07 – 2026-07
8481 80 71Globe valves of cast iron (excl. temperature regulators, pressure-reducing valves, valves for the control of oleohydraulic or pneumatic power transmission, check valves and safety or relief valves, process control valves, taps, cocks and valves for sinks, washbasins, bidets, water cisterns, baths and similar fixtures, and central heating radiator valves)Exporter12026-07 – 2026-07
8481 80 79Globe valves (excl. valves of cast iron or steel, temperature regulators, pressure-reducing valves, valves for the control of oleohydraulic or pneumatic power transmission, check valves and safety or relief valves, process control valves, taps, cocks and valves for sinks, washbasins, bidets, water cisterns, baths and similar fixtures, and central heating radiator valves)Exporter12026-07 – 2026-07
8481 80 81Ball and plug valves for pipes, boiler shells, tanks, vats or the like (excl. taps, cocks and valves for sinks, washbasins, bidets, water cisterns, baths and similar fixtures, and central heating radiator valves)Exporter12026-07 – 2026-07
8482 10 10Ball bearings with greatest external diameter <= 30 mmExporter12026-07 – 2026-07
8482 10 90Ball bearings with greatest external diameter > 30 mmExporter12026-07 – 2026-07
8482 91 90Balls, needles and rollers for bearings (excl. tapered rollers and steel balls of heading 7326)ImporterExporter12026-07 – 2026-07
8483 20 00Bearing housings, incorporating ball or roller bearings, for machineryExporter12026-07 – 2026-07
8483 30 80Plain shaft bearings for machineryExporter12026-07 – 2026-07
8483 40 29Gears and gearing, for machinery (excl. friction gears, spur, helical, bevel, bevel-spur gears and gearing and worm gear, gear boxes and other speed changers)Exporter12026-07 – 2026-07
8483 60 20Clutches and shaft couplings, incl. universal joints, of cast iron or cast steelImporterExporter12026-07 – 2026-07
8483 90 89Toothed wheels, chain sprockets and other transmission elements presented separately and parts of transmission shafts and cranks; bearing housings and plain shaft bearings; gears and gearing, ball or roller screws, gear boxes and other speed changers, flywheels and pulleys, clutches and shaft couplings, n.e.s. (excl. of cast iron or cast steel)Exporter12026-07 – 2026-07
8484 10 00Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metalExporter12026-07 – 2026-07
8484 90 00Sets or assortments of gaskets and similar joints, dissimilar in composition, put up in pouches, envelopes or similar packingsExporter12026-07 – 2026-07
8501 52 20AC motors, multi-phase, of an output > 750 W but <= 7,5 kWExporter12026-07 – 2026-07
8501 52 30AC motors, multi-phase, of an output > 7,5 kW but <= 37 kWExporter12026-07 – 2026-07
8516 10 11Electric instantaneous water heatersExporter12026-07 – 2026-07
8516 80 80Electric heating resistors (excl. electric heating resistors assembled with an insulated former of agglomerated carbon or graphite)Exporter12026-07 – 2026-07
8533 40 90Electrical variable resistors, incl. rheostats and potentiometers, for a power handling capacity > 20 W (excl. wirewound variable resistors and heating resistors)Exporter12026-07 – 2026-07
8536 50 19Switches for a voltage of <= 60 V (excl. relays, push-button switches and rotary switches)Exporter12026-07 – 2026-07
8536 50 80Switches for a voltage of > 60 V and <= 1.000 V (excl. relays, automatic circuit breakers, electronic AC switches consisting of optically coupled input and output circuits "insulated thyristor AC switches", electronic switches, incl. temperature protected electronic switches, consisting of a transistor and a logic chip [chip-on-chip technology] and electromechanical snap-action switches for a currExporter12026-07 – 2026-07
8537 10 98Boards, cabinets and similar combinations of apparatus for electric control or the distribution of electricity, for a voltage <= 1.000 V (excl. switching apparatus for line telephony or line telegraphy, numerical control panels with built-in automatic data-processing machines, programmable memory controllers and touch screens)Exporter12026-07 – 2026-07
8541 42 00Photovoltaic cells not assembled in modules or made up into panelsExporter12026-07 – 2026-07
89HS chapter: HMRC publishes no description for a chapter-level linkExporter12026-07 – 2026-07
9025 19 00Thermometers and pyrometers, not combined with other instruments (excl. liquid-filled thermometers for direct reading)Exporter12026-07 – 2026-07
9026 80 20Electronic instruments or apparatus for measuring or checking variables of liquids or gases, n.e.s.Exporter12026-07 – 2026-07
9027 90 00Microtomes; parts and accessories of instruments and apparatus for physical or chemical analysis, instruments and apparatus for measuring or checking viscosity, porosity, expansion, surface tension or the like, instruments and apparatus for measuring or checking quantities of heat, sound or light, and of microtomes, n.e.s.Exporter12026-07 – 2026-07
9028 20 00Liquid meters, incl. calibrating meters thereforExporter12026-07 – 2026-07
9031 80 20Instruments, appliances and machines for measuring or checking geometrical quantities, n.e.s. in Ch 90Exporter12026-07 – 2026-07
9032 89 00Regulating or controlling instruments and apparatus (excl. hydraulic or pneumatic, manostats, thermostats, and taps, cocks and valves of heading 8481)Exporter12026-07 – 2026-07