A filled cell is a month with at least one published link in the loaded scope. A gap is a month with no published link, not a month without trade.
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
Published in 125 months between 2016-01 and 2026-07. Each published month is listed with its commodity code count in the table above.
at least one published link
no published link in this month
outside the loaded window
swap_horizPublished as both an importer and an exporter, against 140 commodity codes across 20 tariff chapters.
event_busyPublished in 125 of the 126 months from February 2016 to July 2026. A missing month is one with no published link, not a month without trade.
scatter_plotSpread across 20 tariff chapters, none of them holding half the loaded codes.
north_eastThe chapter 40 codes are export only.
What it trades
Grouped by tariff chapter, most published codes first. Descriptions are HMRC’s own, verbatim. This list is bounded: codes outside the loaded coverage are not listed.
inventory_2Chapter 84Published 2016-02 to 2026-0748of 140 loaded codes34%
8422 90 90Parts of packing or wrapping machinery and of other machinery of heading 8422, n.e.s. (excl. parts of dishwashing machines)ImportExport114months published, 2016-02 to 2026-07
8422 30 00Machinery for filling, closing, sealing or labelling bottles, cans, boxes, bags or other containers; machinery for capsuling bottles, jars, tubes and similar containers; machinery for aerating beveragesImportExport109months published, 2016-02 to 2026-07
8483 40 30Ball or roller screws, for machineryImportExport17months published, 2021-08 to 2026-06
8422 90 10Parts of dishwashing machines, n.e.s.Export13months published, 2017-11 to 2025-04
Show the 48 sampled codesShow fewer codesexpand_moreexpand_less
8483 40 51Gear boxes for machineryImportExport11months published, 2021-12 to 2026-07
8482 10 90Ball bearings with greatest external diameter > 30 mm
inventory_2Chapter 85Published 2017-07 to 2026-0744of 140 loaded codes31%
8516 80 20Electric heating resistors, assembled with an insulated formerExport57
inventory_2Chapter 82Published 2019-03 to 2026-079of 140 loaded codes6%
8208 90 00Knives and cutting blades, of base metal, for machines or for mechanical appliances (excl. those for metal or wood-working, kitchen appliances or machines used by the food industry and those for agricultural, horticultural or forestry machines)Export
inventory_2Chapter 73Published 2021-08 to 2026-058of 140 loaded codes6%
7320 20 81Coil compression springs, of iron or steelExport31
inventory_2Chapter 39Published 2016-09 to 2025-114of 140 loaded codes3%
3908 90 00Polyamides, in primary forms (excl. polyamides-6, -11, -12, -6,6, -6,9, -6,10 and -6,12)Export2
inventory_2Chapter 87Published 2019-11 to 2026-064of 140 loaded codes3%
8716 90 90Parts of trailers, semi-trailers and other vehicles not mechanically propelled, n.e.s. (excl. chassis, bodies and axles)ImportExport
inventory_2Chapter 90Published 2020-10 to 2025-094of 140 loaded codes3%
inventory_2Chapter 40Published 2021-06 to 2026-073of 140 loaded codes2%
4010 12 00Conveyor belts or belting, of vulcanised rubber, reinforced only with textile materialsExport27
inventory_2Chapter 76Published 2021-07 to 2025-053of 140 loaded codes2%
7608 20 81Tubes and pipes of aluminium alloys, not further worked than extruded (excl. hollow profiles)Export3
inventory_2Chapter 44Published 2023-06 to 2026-052of 140 loaded codes1%
4417 00 00Tools, tool bodies, tool handles, broom or brush bodies and handles, of wood; boot or shoe lasts and shoetrees, of wood (excl. forms used in the manufacture of hats, forms of heading 8480, other machines and machine components, of wood)Export
inventory_2Chapter 72Published 2017-11 to 2024-082of 140 loaded codes1%
7222 30 97Bars and rods of stainless steel, cold-formed or cold-finished and further worked, or hot-formed and further worked, n.e.s. (excl. forged products)Export
inventory_2Chapter 27Published 2022-11 to 2022-111of 140 loaded codes1%
2710 19 71Lubricating oils and other preparations containing by weight >= 70% of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations, for undergoing a specific process as defined in Additional Note 5 to chapter 27Export
inventory_2Chapter 42Published 2023-11 to 2023-111of 140 loaded codes1%
4205 00 11Conveyor or transmission belts or belting, of leather or composition leatherExport1
inventory_2Chapter 52Published 2024-10 to 2024-101of 140 loaded codes1%
5201 00 90Cotton, neither carded nor combed (excl. rendered absorbent or bleached)Import1
inventory_2Chapter 59Published 2025-08 to 2026-051of 140 loaded codes1%
5910 00 00Transmission or conveyor belts or belting, of textile material, whether or not impregnated, coated, covered or laminated with plastics, or reinforced with metal or other material (excl. those of a thickness of < 3 mm and of indeterminate length or cut to length only, and those impregnated, coated, covered or laminated with rubber or made of yarn or cord impregnated or coated with rubber)Export
inventory_2Chapter 60Published 2022-11 to 2022-111of 140 loaded codes1%
6006 90 00Fabrics, knitted or crocheted, of a width of > 30 cm (excl. of man-made fibres, cotton, wool or fine animal hair, warp knit fabrics "incl. those made on galloon knitting machines", those containing by weight >= 5% of elastomeric yarn or rubber thread, and pile fabrics, incl. "long pile", looped pile fabrics, labels, badges and similar articles, and knitted or crocheted fabrics, impregnated, coatedImport
inventory_2Chapter 74Published 2022-06 to 2022-061of 140 loaded codes1%
inventory_2Chapter 83Published 2022-10 to 2022-101of 140 loaded codes1%
8302 49 00Base metal mountings, fittings and similar articles (excl. locks with keys, clasps and frames with clasps incorporating locks, hinges, castors and mountings and fittings suitable for buildings, motor vehicles or furniture)Export
inventory_2Chapter 94Published 2026-04 to 2026-041of 140 loaded codes1%
9405 42 39Luminaires and lighting fittings, solely for light-emitting diode "LED" light sources, not of plastics, n.e.s.Import1
inventory_2Chapter 96Published 2022-05 to 2022-051of 140 loaded codes1%
8438 80 99Machinery for the industrial preparation or manufacture of food or drink, n.e.s.ImportExport9months published, 2022-03 to 2026-05
8483 40 21Spur and helical gears and gearing, for machinery (excl. friction gears, gear boxes and other speed changers)Export6months published, 2023-01 to 2026-06
8428 33 00Continuous-action elevators and conveyors for goods or materials, belt type (excl. those for underground use)Import5months published, 2025-07 to 2026-06
8438 90 00Parts of machinery for the industrial preparation or manufacture of food or drink, n.e.s.Import5months published, 2025-04 to 2026-06
8481 80 87Diaphragm valves for pipes, boiler shells, tanks, vats or the likeExport5months published, 2023-03 to 2026-01
8483 20 00Bearing housings, incorporating ball or roller bearings, for machineryExport5months published, 2024-07 to 2026-07
8483 40 29Gears and gearing, for machinery (excl. friction gears, spur, helical, bevel, bevel-spur gears and gearing and worm gear, gear boxes and other speed changers)ImportExport5months published, 2022-04 to 2026-07
8483 40 90Gears and gearing, for machinery (excl. ball or roller screws and gears and gearing in general, and toothed wheels, chain sprockets and other transmission elements presented separately)Export5months published, 2024-07 to 2026-06
8487 90 90Machinery parts of chapter 84, not intended for a specific purpose, n.e.s.Export5months published, 2021-03 to 2025-07
8412 90 80Parts of non-electrical engines and motors, n.e.s.ImportExport4months published, 2016-05 to 2023-11
8479 89 97Machines, apparatus and mechanical appliances, n.e.s.Export4months published, 2019-05 to 2026-07
8483 90 81Toothed wheels, chain sprockets and other transmission elements presented separately and parts of transmission shafts and cranks; bearing housings and plain shaft bearings; gears and gearing, ball or roller screws, gear boxes and other speed changers, flywheels and pulleys, clutches and shaft couplings, of cast iron or cast steel, n.e.s.Export4months published, 2022-11 to 2025-12
8422 11 00Dishwashing machines of the household typeExport3months published, 2017-02 to 2025-06
8422 19 00Dishwashing machines (excl. those of the household type)Export3months published, 2016-02 to 2016-09
8422 40 00Packing or wrapping machinery, incl. heat-shrink wrapping machinery (excl. machinery for filling, closing, sealing or labelling bottles, cans, boxes, bags or other containers and machinery for capsuling bottles, jars, tubes and similar containers)ImportExport3months published, 2021-02 to 2025-09
8423 10 10Household scales (excl. personal weighing machines and baby scales)Export3months published, 2018-03 to 2019-02
8483 30 80Plain shaft bearings for machineryExport3months published, 2023-03 to 2025-05
8428 90 90Lifting, handling, loading or unloading machinery, n.e.s.Export2months published, 2017-03 to 2020-08
8483 50 20Flywheels and pulleys, incl. pulley blocks, of cast iron or cast steelExport2months published, 2020-03 to 2022-09
8484 10 00Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metalExport2months published, 2022-06 to 2024-04
8412 31 00Pneumatic power engines and motors, linear-acting, "cylinders"Export1months published, 2026-06 to 2026-06
8414 59 15Fans of a kind used solely or principally for cooling microprocessors, telecommunication apparatus, automatic data processing machines or units of automatic data processing machinesImport1months published, 2022-03 to 2022-03
8420 10 10Calendering or other rolling machines, of a kind used in the textile industryExport1months published, 2016-04 to 2016-04
8421 99 90Parts of machinery and apparatus for filtering or purifying liquids or gases, n.e.s.Import1months published, 2022-06 to 2022-06
8422 20 00Machinery for cleaning or drying bottles or other containers (excl. dishwashing machines)Export1months published, 2026-03 to 2026-03
8423 30 90Constant weight scales and scales for discharging a predetermined weight of material into a bag or container, incl. hopper scales, using non-electronic means for gauging weightExport1months published, 2024-06 to 2024-06
8423 81 21Check weighers and automatic control machines operating by reference to a pre-determined weight, having weighing capacity <= 30 kg, using electronic means for gauging weightExport1months published, 2025-01 to 2025-01
8431 20 00Parts of fork-lift trucks and other works trucks fitted with lifting or handling equipment, n.e.s.Export1months published, 2020-09 to 2020-09
8431 39 00Parts of machinery of heading 8428, n.e.s.Export1months published, 2022-09 to 2022-09
8442 30 00Machinery, apparatus and equipment for preparing or making printing plates, cylinders or other printing components (excl. machines of headings 8456 to 8465)Export1months published, 2022-05 to 2022-05
8466 92 80Parts and accessories for machine tools for working wood, cork, bone, hard rubber, hard plastics or similar hard materials, n.e.s. (excl. of cast iron or cast steel)Export1months published, 2025-11 to 2025-11
8466 93 70No description publishedExport1months published, 2016-11 to 2016-11
8466 94 00Parts and accessories for machine tools for working metal without removing material, n.e.s.Import1months published, 2022-10 to 2022-10
8479 89 70Automated electronic component placement machines of a kind used solely or principally for the manufacture of printed circuit assembliesExport1months published, 2025-08 to 2025-08
8481 20 90Valves for the control of pneumatic power transmissionExport1months published, 2026-07 to 2026-07
8481 80 99Appliances for pipes, boiler shells, tanks, vats or the like (excl. pressure-reducing valves, valves for the control of pneumatic power transmission, check "non-return" valves, safety or relief valves, taps, cocks and valves for sinks, baths and similar fixtures, central heating radiator valves, valves for pneumatic tyres and inner-tubes, process control valves, globe valves, gate valves, ball andExport1months published, 2026-01 to 2026-01
8482 10 10Ball bearings with greatest external diameter <= 30 mmExport1months published, 2023-03 to 2023-03
8483 30 38Bearing housings not incorporating ball or roller bearings, for machinery and plain shaft bearings (excl. those for ball or roller bearings)Export1months published, 2025-09 to 2025-09
8483 90 89Toothed wheels, chain sprockets and other transmission elements presented separately and parts of transmission shafts and cranks; bearing housings and plain shaft bearings; gears and gearing, ball or roller screws, gear boxes and other speed changers, flywheels and pulleys, clutches and shaft couplings, n.e.s. (excl. of cast iron or cast steel)Export1months published, 2023-03 to 2023-03
8486 40 00Machines and apparatus specified in Note 11 C to chapter 84Export1months published, 2025-02 to 2025-02
months published, 2021-01 to 2026-07
8501 51 00AC motors, multi-phase, of an output > 37,5 W but <= 750 WImportExport53months published, 2021-02 to 2026-07
8543 70 90Electrical machines and apparatus, having individual functions, n.e.s. in chap. 85ImportExport53months published, 2021-01 to 2026-07
8501 52 20AC motors, multi-phase, of an output > 750 W but <= 7,5 kWImportExport37months published, 2021-12 to 2026-06
Show the 44 sampled codesShow fewer codesexpand_moreexpand_less
8537 10 10Numerical control panels with built-in automatic data-processing machinesImportExport35months published, 2021-01 to 2026-07
8505 20 00Electromagnetic couplings, clutches and brakesExport34months published, 2021-10 to 2026-06
8536 90 95Electrical apparatus for making connections to or in electrical circuits, for a voltage <= 1.000 V (excl. fuses, circuit breakers and other apparatus for protecting electrical circuits, relays and other switches, lamp holders, plugs and sockets, prefabricated elements for electrical circuits, connections and contact elements for wire and cables, and car battery clamps)ImportExport17months published, 2022-02 to 2026-06
8536 50 19Switches for a voltage of <= 60 V (excl. relays, push-button switches and rotary switches)Export15months published, 2021-10 to 2026-07
8536 50 80Switches for a voltage of > 60 V and <= 1.000 V (excl. relays, automatic circuit breakers, electronic AC switches consisting of optically coupled input and output circuits "insulated thyristor AC switches", electronic switches, incl. temperature protected electronic switches, consisting of a transistor and a logic chip [chip-on-chip technology] and electromechanical snap-action switches for a currExport15months published, 2021-07 to 2026-04
8536 69 90Plugs and sockets for a voltage of <= 1.000 V (excl. those for coaxial cables and printed circuits)Export13months published, 2021-01 to 2026-04
8503 00 91Parts suitable for use solely or principally with electric motors and generators, electric generating sets and rotary converters, n.e.s., of cast iron or cast steelImportExport12months published, 2022-03 to 2026-06
8544 42 90Electric conductors, for a voltage <= 1.000 V, insulated, fitted with connectors, n.e.s. (other than of a kind used for telecommunications)Export7months published, 2022-06 to 2025-03
8501 52 90AC motors, multi-phase, of an output > 37 kW but <= 75 kWImport6months published, 2022-03 to 2025-05
8537 10 91Programmable memory controllers (excl. numerical control panels with built-in automatic data-processing machines)Export5months published, 2022-03 to 2025-05
8516 80 80Electric heating resistors (excl. electric heating resistors assembled with an insulated former of agglomerated carbon or graphite)Export4months published, 2021-08 to 2025-10
8528 52 91LCD monitors designed for computer use but of a kind not used principally with a computer (excl. with TV receiver)ImportExport3months published, 2025-01 to 2025-09
8501 10 10Synchronous motors of an output <= 18 WExport2months published, 2017-09 to 2020-07
8503 00 98Parts suitable for use solely or principally with electric motors and generators, electric generating sets and rotary converters, n.e.s. (excl. non-magnetic retaining rings, steel laminations and stator and rotor cores and of cast iron or cast steel)Import2months published, 2025-01 to 2025-05
8503 00 99Parts suitable for use solely or principally with electric motors and generators, electric generating sets and rotary converters, n.e.s. (excl. non-magnetic retaining rings and of cast iron or cast steel)Import2months published, 2021-12 to 2022-05
8504 40 90Static converters (excl. of a kind used with telecommunication apparatus, automatic data-processing machines and units thereof, battery chargers, polycrystalline semiconductor and other rectifiers, and a.c. converters)Import2months published, 2021-03 to 2022-03
8516 10 11Electric instantaneous water heatersExport2months published, 2020-06 to 2021-01
8501 20 00Universal AC-DC motors of an output > 37,5 WImport1months published, 2017-10 to 2017-10
8501 31 00DC motors of an output > 37,5 W but <= 750 W and DC generators of an output <= 750 W (excl. photovoltaic generators)Import1months published, 2022-02 to 2022-02
8501 32 00DC motors and DC generators of an output > 750 W but <= 75 kW (excl. photovoltaic generators)Export1months published, 2023-02 to 2023-02
8501 40 80AC motors, single phase, of an output of > 750 WImport1months published, 2018-05 to 2018-05
8501 52 30AC motors, multi-phase, of an output > 7,5 kW but <= 37 kWImport1months published, 2017-09 to 2017-09
8504 10 20Inductors, whether or not connected with a capacitorExport1months published, 2020-10 to 2020-10
8504 40 30Static converters of a kind used with telecommunication apparatus, automatic data-processing machines and units thereofImport1months published, 2021-11 to 2021-11
8504 50 95Inductors (excl. of a kind used with telecommunication apparatus and for power supplies for automatic data-processing machines and units thereof and those for discharge lamps or tubes)Import1months published, 2017-07 to 2017-07
8504 90 90Parts of static converters, n.e.s.Import1months published, 2025-09 to 2025-09
8505 90 90Parts of permanent magnets, electromagnets, electromagnetic clutches, couplings, brakes and lifting heads, electromagnetic or permanent magnet holding devices, n.e.s.Export1months published, 2025-09 to 2025-09
8516 79 70Electro-thermic appliances, for domestic use (excl. hairdressing appliances and hand dryers, space-heating and soil-heating apparatus, water heaters, immersion heaters, smoothing irons, microwave ovens, ovens, cookers, cooking plates, boiling rings, grillers, roasters, coffee makers, tea makers, toasters and deep fat fryers)Export1months published, 2026-05 to 2026-05
8516 90 00Parts of electric water heaters, immersion heaters, space-heating apparatus and soil-heating apparatus, hairdressing apparatus and hand dryers, electro-thermic appliances of a kind used for domestic purposes and electric heating resistors, n.e.s.Export1months published, 2025-11 to 2025-11
8517 62 00Machines for the reception, conversion and transmission or regeneration of voice, images or other data, incl. switching and routing apparatus (excl. telephone sets, telephones for cellular networks or for other wireless networks)Export1months published, 2026-05 to 2026-05
8518 10 00Microphones and stands therefor (excl. cordless microphones with built-in transmitter)Import1months published, 2022-12 to 2022-12
8536 10 10Fuses for a current <= 10 A, for a voltage <= 1.000 VExport1months published, 2021-11 to 2021-11
8536 49 00Relays for a voltage > 60 V but <= 1.000 VExport1months published, 2024-03 to 2024-03
8536 69 10Plugs and sockets for a voltage of <= 1.000 V, for coaxial cablesExport1months published, 2025-04 to 2025-04
8538 10 00Boards, panels, consoles, desks, cabinets and other bases for the goods of heading 8537, not equipped with their apparatusExport1months published, 2022-06 to 2022-06
8538 90 99Parts suitable for use solely or principally with the apparatus of heading 8535, 8536 or 8537, n.e.s. (excl. electronic assemblies, and boards, panels, consoles, desks, cabinets and other bases for the goods of heading 8537, not equipped with their apparatus, and for wafer probers)Export1months published, 2025-03 to 2025-03
8539 10 00Sealed beam lamp unitsExport1months published, 2026-07 to 2026-07
8543 90 00Parts of electrical machines and apparatus, having individual functions, n.e.s. in chapter 85Import1months published, 2024-04 to 2024-04
8543 90 90Parts of electrical machines and apparatus, having individual functions, n.e.s. in chapter 85Import1months published, 2026-06 to 2026-06
8544 11 90Winding wire for electrical purposes, of copper, insulated (excl. lacquered or enamelled)Export1months published, 2020-02 to 2020-02
32
months published, 2021-09 to 2026-07
8208 30 00Knives and cutting blades, of base metal, for kitchen appliances or for machines used by the food industryImportExport15months published, 2021-01 to 2026-06
8209 00 20Inserts, indexable, for tools, unmounted, of sintered metal carbide or cermetsExport2months published, 2022-07 to 2025-11
8205 20 00Hammers and sledge hammers with working parts of base metalExport1months published, 2024-01 to 2024-01
Show the 9 sampled codesShow fewer codesexpand_moreexpand_less
8205 59 80Hand tools, incl. glaziers' diamonds, of base metal, n.e.s.Export1months published, 2023-07 to 2023-07
8207 19 10Rock-drilling or earth-boring tools, interchangeable, with working parts of diamond or agglomerated diamondExport1months published, 2019-03 to 2019-03
8207 90 99Tools, interchangeable, for use in mechanical or non-mechanical hand-held appliances, or for machine tools, for working materials other than metal, with working parts of materials other than diamond, agglomerated diamond, sintered metal carbide or cermets, n.e.s.Import1months published, 2021-11 to 2021-11
8208 10 00Knives and cutting blades, of base metal, for machines or for mechanical appliances, for metalworkingExport1months published, 2020-12 to 2020-12
8209 00 80Plates, sticks, tips and the like for tools, unmounted, of sintered metal carbides or cermets (excl. indexable inserts)Export1months published, 2025-09 to 2025-09
months published, 2021-08 to 2026-05
7320 20 89Helical springs, of iron or steel (excl. hot-worked, coil compression and coil tension springs)Export9months published, 2021-10 to 2025-10
7320 20 20Helical springs, of iron or steel, hot-worked (excl. flat spiral springs, clock and watch springs, springs for sticks and handles of umbrellas or parasols, and shock absorbers of Section 17)Export3months published, 2024-05 to 2025-12
7307 91 00Flanges of iron or steel (excl. cast or stainless products)Export1months published, 2025-03 to 2025-03
Show the 8 sampled codesShow fewer codesexpand_moreexpand_less
7309 00 90Reservoirs, tanks, vats and similar containers, of iron or steel, for solids, of a capacity of > 300 l (excl. containers lined or heat-insulated or fitted with mechanical or thermal equipment and containers specifically constructed or equipped for one or more types of transport)Import1months published, 2022-06 to 2022-06
7315 89 00Chain of iron or steel (excl. articulated link chain, skid chain, stud-link chain, welded link chain and parts thereof; watch chains, necklace chains and the like, cutting and saw chain, skid chain, scraper chain for conveyors, toothed chain for textile machinery and the like, safety devices with chains for securing doors, and measuring chains)Export1months published, 2025-02 to 2025-02
7315 90 00Parts of skid chain, stud-link chain and other chains of heading 7315 (excl. articulated link chain)Export1months published, 2024-01 to 2024-01
7326 90 98Articles of iron or steel, n.e.s.Import1months published, 2023-03 to 2023-03
months published, 2023-01 to 2024-04
3926 90 97Articles of plastics and articles of other materials of heading 3901 to 3914, n.e.s.ImportExport2months published, 2023-03 to 2025-11
3921 90 90Plates, sheets, film, foil and strip, of plastics, reinforced, laminated, supported or similarly combined with other materials, unworked or merely surface-worked or merely cut into squares or rectangles (excl. of cellular plastic, addition polymerization products, condensation polymerization products and rearrangement polymerization products; self-adhesive products and floor, wall and ceiling coveImport1months published, 2016-09 to 2016-09
3923 90 00Articles for the conveyance or packaging of goods, of plastics (excl. boxes, cases, crates and similar articles; sacks and bags, incl. cones; carboys, bottles, flasks and similar articles; spools, spindles, bobbins and similar supports; stoppers, lids, caps and other closures)Import1months published, 2025-11 to 2025-11
20
months published, 2022-02 to 2026-05
8708 10 10Bumpers and parts thereof, for the industrial assembly of motor cars and other motor vehicles principally designed for the transport of persons, vehicles for the transport of goods with compression-ignition internal combustion piston engine "diesel or semi-diesel engine" of a cylinder capacity <= 2.500 cm or with spark-ignition internal piston engine of a cylinder capacity <= 2.800 cm and speciaExport2months published, 2019-11 to 2019-12
8708 99 10Parts and accessories for the industrial assembly of: pedestrian-controlled tractors, motor cars and vehicles principally designed for the transport of persons, vehicles for the transport of goods with compression-ignition internal combustion piston engine "diesel or semi-diesel engine" <= 2500 cm or with spark-ignition internal piston engine <= 2800 cm , special purpose motor vehicles of headingExport1months published, 2026-06 to 2026-06
8714 10 90Parts and accessories of motorcycles, incl. mopeds, n.e.s. (excl. brakes, gear boxes, road wheels, silencers, exhaust pipes, clutches, and their parts)Export1months published, 2025-11 to 2025-11
months published, 2022-01 to 2025-09
9032 10 20Electronic thermostatsExport2months published, 2020-10 to 2022-01
9026 20 40Spiral or metal diaphragm type pressure gaugesExport1months published, 2025-09 to 2025-09
9032 90 00Parts and accessories for regulating or controlling instruments and apparatus, n.e.s.Import1months published, 2025-07 to 2025-07
months published, 2021-11 to 2026-07
4016 93 00Gaskets, washers and other seals, of vulcanised rubber (excl. hard rubber and those of cellular rubber)Export27months published, 2021-12 to 2026-07
4010 35 00Endless synchronous belts, of vulcanised rubber, of an outside circumference > 60 cm but <= 150 cmExport8months published, 2021-06 to 2025-09
months published, 2021-07 to 2025-05
7608 20 89Tubes and pipes of aluminium alloys (excl. such products welded or not further worked than extruded, and hollow profiles)Export1months published, 2023-10 to 2023-10
7616 99 10Articles of aluminium, cast, n.e.s.Export1months published, 2022-02 to 2022-02
1
months published, 2023-06 to 2023-06
4418 29 50Doors and their frames and thresholds, of coniferous wood (excl. of tropical wood)Import1months published, 2026-05 to 2026-05
5
months published, 2021-12 to 2024-08
7216 50 10Sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, with a cross-section which is capable of being enclosed in a square the side of which is <= 80 mm (excl. U, I, H, L or T sections)Export1months published, 2017-11 to 2017-11
1
months published, 2022-11 to 2022-11
months published, 2023-11 to 2023-11
months published, 2024-10 to 2024-10
2
months published, 2025-08 to 2026-05
1
months published, 2022-11 to 2022-11
months published, 2022-06 to 2022-06
1
months published, 2022-10 to 2022-10
months published, 2026-04 to 2026-04
months published, 2022-05 to 2022-05
PACKAGING AUTOMATION LIMITED · Tradaro
On the same codes
Traders published against the most of the same codes. A shared code is a shared commodity, not a relationship between them.