Published trader · United Kingdom
Directory snapshot: 2026-09-12. Address observation date, not a trade date.
HMRC trader directory · ref 54558 · published 2025-08 to 2026-07
Months published
Loading months publishedCommodity codes
Loading commodity codesCodes in the loaded coverage this trader is published against, most months first. Descriptions are HMRC’s own, verbatim. This list is bounded; codes outside the loaded coverage are not listed.
| Commodity code | Description (as published) | Direction | Months | Window |
|---|---|---|---|---|
| 4016 93 00 | Gaskets, washers and other seals, of vulcanised rubber (excl. hard rubber and those of cellular rubber) | ImporterExporter | 12 | 2025-08 – 2026-07 |
| 7326 90 92 | Articles of iron or steel, open-die forged, n.e.s. | Importer | 12 | 2025-08 – 2026-07 |
| 7326 90 98 | Articles of iron or steel, n.e.s. | Importer | 12 | 2025-08 – 2026-07 |
| 8482 20 00 | Tapered roller bearings, incl. cone and tapered roller assemblies | ImporterExporter | 12 | 2025-08 – 2026-07 |
| 8482 80 00 | Roller bearings, incl. combined ball-roller bearings (excl. ball bearings, tapered roller bearings, incl. cone and tapered roller assemblies, spherical roller bearings, needle and cylindrical roller bearings) | ImporterExporter | 12 | 2025-08 – 2026-07 |
| 8482 91 90 | Balls, needles and rollers for bearings (excl. tapered rollers and steel balls of heading 7326) | Importer | 12 | 2025-08 – 2026-07 |
| 8482 99 00 | Parts of ball or roller bearings (excl. balls, needles and rollers), n.e.s. | ImporterExporter | 12 | 2025-08 – 2026-07 |
| 8483 30 32 | Bearing housings for machinery, for ball or roller bearings | ImporterExporter | 12 | 2025-08 – 2026-07 |
| 8483 90 20 | Parts of bearing housings, n.e.s. | ImporterExporter | 12 | 2025-08 – 2026-07 |
| 8484 90 00 | Sets or assortments of gaskets and similar joints, dissimilar in composition, put up in pouches, envelopes or similar packings | ImporterExporter | 12 | 2025-08 – 2026-07 |
| 3926 90 97 | Articles of plastics and articles of other materials of heading 3901 to 3914, n.e.s. | ImporterExporter | 10 | 2025-08 – 2026-07 |
| 8607 19 10 | Axles, wheels and wheel parts, of railway or tramway locomotives or rolling stock, n.e.s. | ImporterExporter | 10 | 2025-09 – 2026-07 |
| 4819 10 00 | Cartons, boxes and cases, of corrugated paper or paperboard | Importer | 9 | 2025-08 – 2026-06 |
| 8483 20 00 | Bearing housings, incorporating ball or roller bearings, for machinery | Exporter | 8 | 2025-10 – 2026-07 |
| 6909 19 00 | Ceramic wares for chemical or other technical uses (excl. of porcelain or china, articles having a hardness equivalent to >= 9 on the Mohs scale, millstones, polishing stones, grindstones and the like of heading 6804, refractory ceramic goods, electrical devices, insulators and other electrical insulating fittings) | Importer | 7 | 2025-09 – 2026-05 |
| 7326 19 10 | Articles of iron or steel, open-die forged, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills) | Importer | 6 | 2025-08 – 2026-07 |
| 8487 90 90 | Machinery parts of chapter 84, not intended for a specific purpose, n.e.s. | ImporterExporter | 6 | 2025-11 – 2026-07 |
| 5911 90 99 | Textile products and articles, for technical purposes, specified in Note 7 to chapter 59, n.e.s. | Exporter | 5 | 2025-08 – 2026-06 |
| 7318 15 95 | Screws and bolts, of iron or steel "whether or not with their nuts and washers", with heads (excl. with slotted, cross-recessed or hexagonal head; wood screws, self-tapping screws and screws and bolts for fixing railway track construction material, screw hooks and screw rings) | Exporter | 5 | 2025-08 – 2026-05 |
| 8482 50 00 | Cylindrical roller bearings, incl. cage and roller assemblies (excl. bearings of 8482 10 to 8482 40) | ImporterExporter | 5 | 2025-08 – 2026-07 |
| 8483 40 90 | Gears and gearing, for machinery (excl. ball or roller screws and gears and gearing in general, and toothed wheels, chain sprockets and other transmission elements presented separately) | Importer | 5 | 2025-10 – 2026-07 |
| 8607 99 10 | Axle-boxes and parts thereof, of railway or tramway locomotives or rolling stock of heading 8603, 8604, 8605 or 8606, n.e.s. | Importer | 5 | 2025-09 – 2026-05 |
| 6804 22 90 | Millstones, grindstones, grinding wheels and the like, without frameworks, for sharpening, polishing, trueing or cutting, of agglomerated natural abrasives or ceramics (excl. of agglomerated synthetic or natural diamond, hand sharpening or polishing stones, perfumed pumice stones, and grinding wheels etc. specifically for dental drill engines) | Importer | 4 | 2025-10 – 2026-07 |
| 8466 94 00 | Parts and accessories for machine tools for working metal without removing material, n.e.s. | Importer | 3 | 2025-09 – 2026-07 |
| 8482 30 00 | Spherical roller bearings | ImporterExporter | 3 | 2025-11 – 2026-07 |
| 8484 20 00 | Mechanical seals | ImporterExporter | 3 | 2025-10 – 2026-03 |
| 8543 70 90 | Electrical machines and apparatus, having individual functions, n.e.s. in chap. 85 | Importer | 3 | 2025-10 – 2026-02 |
| 8603 10 00 | Self-propelled railway or tramway coaches, vans and trucks, powered from an external source of electricity (excl. those of heading 8604) | Importer | 3 | 2025-11 – 2026-02 |
| 4808 10 00 | Corrugated paper and paperboard "with or without glued flat surface sheets", whether or not perforated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state | Importer | 2 | 2026-01 – 2026-02 |
| 7616 99 10 | Articles of aluminium, cast, n.e.s. | Importer | 2 | 2026-01 – 2026-02 |
| 8483 30 80 | Plain shaft bearings for machinery | Importer | 2 | 2026-04 – 2026-07 |
| 8607 91 90 | Parts of railway or tramway locomotives, n.e.s. | Importer | 2 | 2025-11 – 2026-02 |
| 3403 99 00 | Lubricant preparations, incl. cutting-oil preparations, bolt or nut release preparations, anti-rust or anti-corrosion preparations and mould-release preparations, based on lubricants but not containing petroleum oil or bituminous mineral oil (excl. preparations for the treatment of textiles, leather, furskins and other materials) | Importer | 1 | 2025-09 – 2025-09 |
| 4016 99 52 | Rubber-to-metal bonded parts of vulcanised rubber (excl. hard rubber), of a type intended exclusively or mainly for use in motor vehicles of heading 8701 to 8705 (excl. those of cellular rubber) | Importer | 1 | 2026-01 – 2026-01 |
| 4821 10 90 | Paper or paperboard labels of all kinds, printed (excl. self-adhesive) | Importer | 1 | 2025-11 – 2025-11 |
| 6909 90 00 | Ceramic troughs, tubs and similar receptacles of a kind used in agriculture; ceramic pots, jars and similar articles of a kind used for the conveyance or packing of goods (excl. general-purpose storage vessels for laboratories, containers for shops and household articles) | Importer | 1 | 2026-07 – 2026-07 |
| 7318 13 00 | Screw hooks and screw rings, of iron or steel | Exporter | 1 | 2025-08 – 2025-08 |
| 7318 15 20 | Screws and bolts, of iron or steel "whether or not with their nuts and washers", for fixing railway track construction material (excl. coach screws) | Exporter | 1 | 2026-04 – 2026-04 |
| 7318 16 99 | Nuts of iron or steel other than stainless, with an inside diameter > 12 mm (excl. blind rivet nuts and self-locking nuts) | Exporter | 1 | 2026-05 – 2026-05 |
| 7318 19 00 | Threaded articles, of iron or steel, n.e.s. | Exporter | 1 | 2025-12 – 2025-12 |
| 7318 21 00 | Spring washers and other lock washers, of iron or steel | Importer | 1 | 2026-04 – 2026-04 |
| 7318 24 00 | Cotters and cotter pins, of iron or steel | Importer | 1 | 2025-10 – 2025-10 |
| 8466 20 98 | Work holders for machine tools (excl. work holders for lathes and in the form of jigs and fixtures for specific applications, incl. sets of standard jig and fixture components) | Importer | 1 | 2026-07 – 2026-07 |
| 8479 89 97 | Machines, apparatus and mechanical appliances, n.e.s. | Exporter | 1 | 2025-09 – 2025-09 |
| 8482 10 90 | Ball bearings with greatest external diameter > 30 mm | Importer | 1 | 2026-03 – 2026-03 |
| 8482 40 00 | Needle roller bearings, incl. cage and needle roller assemblies | Importer | 1 | 2026-05 – 2026-05 |
| 8482 91 10 | Tapered rollers for bearings | Exporter | 1 | 2025-12 – 2025-12 |
| 8487 90 51 | Parts of machinery of chapter 84, not intended for a specific purpose, of cast steel, n.e.s. | Importer | 1 | 2026-05 – 2026-05 |
| 86 | HS chapter: HMRC publishes no description for a chapter-level link | Importer | 1 | 2026-06 – 2026-06 |
| 8607 91 10 | Axle-boxes and parts thereof, for locomotives, n.e.s. | Importer | 1 | 2025-12 – 2025-12 |
| 8607 99 80 | Parts of rolling stock of heading 8603, 8604, 8605 or 8606, n.e.s. | Importer | 1 | 2026-07 – 2026-07 |
| 8708 99 97 | Parts and accessories for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. of closed-die forged steel) | Importer | 1 | 2026-07 – 2026-07 |
| 9023 00 80 | Instruments, apparatus and models designed for demonstrational purposes, e.g. in education or exhibitions, unsuitable for other uses (excl. ground flying trainers of heading 8805, collectors' pieces of heading 9705, antiques of an age > 100 years of heading 9706 and of the type used for teaching physics, chemistry and technical subjects) | Importer | 1 | 2026-06 – 2026-06 |
| 9612 10 20 | Ribbons made from man-made fibres, of a width of < 30 mm, permanently enclosed in plastic or metal cartridges, of a kind used in automatic typewriters, automatic data-processing equipment and other equipment | Importer | 1 | 2025-10 – 2025-10 |
Months published
Commodity codes HMRC published this trader against, month by month, within the loaded coverage. A gap is a month with no published link in that coverage, not a month without trade.
On the same codes
Traders HMRC published against the most of the same published commodity codes. A shared code is a shared commodity, not a trading relationship between them.