Published trader · United Kingdom

ANDREAS STIHL LIMITED

Importer

Directory snapshot: 2026-09-12. Address observation date, not a trade date.

HMRC trader directory · ref 6290 · published 2026-07 to 2026-07

137Commodity codes
1Months published
137Published links
2026-07First published
2026-07Last published

Months published

Commodity codes HMRC published this trader against, month by month, within the loaded coverage. A gap is a month with no published link in that coverage, not a month without trade.

2026-072026-07

Commodity codes on the record

Codes in the loaded coverage this trader is published against, most months first. Descriptions are HMRC’s own, verbatim. This list is bounded; codes outside the loaded coverage are not listed.

Commodity codeDescription (as published)DirectionMonthsWindow
2710 12 45Motor spirit, with a lead content <= 0,013 g/l, with a research octane number "RON" of >= 95 but < 98 (excl. containing biodiesel)Importer12026-07 – 2026-07
2710 19 81Motor oils, compressor lube oils and turbine lube oils containing by weight >= 70% of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations (excl. for undergoing chemical transformation)Importer12026-07 – 2026-07
2710 19 99Lubricating oils and other heavy oils and preparations n.e.s., containing by weight >= 70% of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations (excl. for undergoing chemical transformation)Importer12026-07 – 2026-07
3208 90 99Paints and varnishes, incl. enamels and lacquers, based on chemically modified natural polymers, dispersed or dissolved in a non-aqueous mediumImporter12026-07 – 2026-07
3403 19 20Lubricants having a bio-based carbon content of at least 25% by mass and which are biodegradable at a level of at least 60%Importer12026-07 – 2026-07
3403 19 80Lubricating preparations, incl. cutting-oil preparations, bolt or nut release preparations, anti-rust or anti-corrosion preparations and mould-release preparations, based on lubricants, containing, by weight, < 70% of petroleum oil or oil obtained from bituminous minerals (excl. preparations for the treatment of textile materials, leather, fur skins or other materials, and lubricants having a bio-Importer12026-07 – 2026-07
3403 99 00Lubricant preparations, incl. cutting-oil preparations, bolt or nut release preparations, anti-rust or anti-corrosion preparations and mould-release preparations, based on lubricants but not containing petroleum oil or bituminous mineral oil (excl. preparations for the treatment of textiles, leather, furskins and other materials)Importer12026-07 – 2026-07
3916 90 10Monofilament of which any cross-sectional dimension > 1 mm, rods, sticks and profile shapes, of condensation or rearrangement polymerization products, whether or not surface-worked but not further worked, whether or not chemically modifiedImporter12026-07 – 2026-07
3917 21 90Rigid tubes, pipes and hoses, of polymers of ethylene (excl. seamless and cut to length only)Importer12026-07 – 2026-07
3917 39 00Flexible tubes, pipes and hoses, of plastics, reinforced or otherwise combined with other materials (excl. those with a burst pressure of >= 27,6 MPa)Importer12026-07 – 2026-07
3919 90 80Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls > 20 cm wide (excl. floor, wall and ceiling coverings of heading 3918, and circular polishing pads used in semiconductor wafer production))Importer12026-07 – 2026-07
3923 10 90Boxes, cases, crates and similar articles for the conveyance or packaging of goods, of plastics (excl. special ones for semiconductor wafers, masks or reticles)Importer12026-07 – 2026-07
3923 30 90Carboys, bottles, flasks and similar articles for the conveyance or packaging of goods, of plastics, with a capacity of > 2 lImporter12026-07 – 2026-07
3926 90 60Protective face shields/visors of plasticsImporter12026-07 – 2026-07
3926 90 97Articles of plastics and articles of other materials of heading 3901 to 3914, n.e.s.Importer12026-07 – 2026-07
4009 22 00Tubes, pipes and hoses, of vulcanised rubber (excl. hard rubber), reinforced or otherwise combined only with metal, with fittingsImporter12026-07 – 2026-07
4010 31 00Endless transmission belts of trapezoidal cross-section "V-belts", of vulcanised rubber, V-ribbed, of an outside circumference > 60 cm but <= 180 cmImporter12026-07 – 2026-07
4010 33 00Endless transmission belts of trapezoidal cross-section "V-belts", of vulcanised rubber, V-ribbed, of an outside circumference > 180 cm but <= 240 cmImporter12026-07 – 2026-07
4010 36 00Endless synchronous belts, of vulcanised rubber, of an outside circumference > 150 cm but <= 198 cmImporter12026-07 – 2026-07
4016 99 97Articles of vulcanised rubber, n.e.s. (excl. hard rubber and those of cellular rubber)Importer12026-07 – 2026-07
4203 29 10Protective gloves of leather or composition leather, for all tradesImporter12026-07 – 2026-07
4421 99 99Articles of wood, n.e.s.Importer12026-07 – 2026-07
4819 10 00Cartons, boxes and cases, of corrugated paper or paperboardImporter12026-07 – 2026-07
4819 60 00Box files, letter trays, storage boxes and similar articles, of paperboard, of a kind used in offices, shops or the like (excl. packing containers)Importer12026-07 – 2026-07
4821 10 10Self-adhesive paper or paperboard labels of all kinds, printedImporter12026-07 – 2026-07
4911 99 00Printed matter, n.e.s.Importer12026-07 – 2026-07
5607 50 11Twine, cordage, ropes and cables of nylon, other polyamides or polyesters, plaited or braided and whether or not impregnated, coated, covered or sheathed with rubber or plastics, with a linear density of > 50.000 decitex "5 g/m"Importer12026-07 – 2026-07
5911 90 99Textile products and articles, for technical purposes, specified in Note 7 to chapter 59, n.e.s.Importer12026-07 – 2026-07
6104 33 00Women's or girls' jackets and blazers of synthetic fibres, knitted or crocheted (excl. wind-jackets and similar articles)Importer12026-07 – 2026-07
6203 33 10Men's or boys' jackets and blazers of synthetic fibres, industrial and occupational (excl. knitted or crocheted, and wind-jackets and similar articles)Importer12026-07 – 2026-07
6203 43 11Men's or boys' trousers and breeches of synthetic fibres, industrial and occupational (excl. knitted or crocheted and bib and brace overalls)Importer12026-07 – 2026-07
6212 90 00Corsets, braces, garters, suspenders and similar articles and parts thereof, incl. parts of brassieres, girdles, panty girdles and corselettes, of all types of textile materials, whether or not elasticated, incl. knitted or crocheted (excl. complete brassieres, girdles, panty girdles and corselettes)Importer12026-07 – 2026-07
6217 10 00Made-up clothing accessories, of all types of textile materials, n.e.s. (excl. knitted or crocheted)Importer12026-07 – 2026-07
6307 90 10Made-up articles of textile materials, incl. dress patterns, knitted or crocheted, n.e.s.Importer12026-07 – 2026-07
6307 90 98Made-up articles of textile materials, incl. dress patterns, n.e.s. (excl. of felt, knitted or crocheted, single-use drapes used during surgical procedures made up of nonwovens, and protective face masks)Importer12026-07 – 2026-07
6403 40 00Footwear, incorporating a protective metal toecap, with outer soles of rubber, plastics, leather or composition leather and uppers of leather (excl. sports footwear and orthopaedic footwear)Importer12026-07 – 2026-07
6505 00 30Peaked caps and the like, knitted or crocheted, or made up from lace, felt or other textile fabric, in the piece (but not in strips), whether or not lined or trimmed (excl. toy and carnival headgear)Importer12026-07 – 2026-07
6506 10 10Safety headgear of plastics, whether or not lined or trimmedImporter12026-07 – 2026-07
6507 00 00Headbands, linings, covers, hat foundations, hat frames, peaks and chinstraps, for headgear (excl. headbands used by sportsmen as sweatbands, knitted or crocheted)Importer12026-07 – 2026-07
6804 21 00Millstones, grindstones, grinding wheels and the like, without frameworks, for sharpening, polishing, trueing or cutting, of agglomerated synthetic or natural diamond (excl. hand sharpening or polishing stones, and grinding wheels etc. specifically for dental drill engines)Importer12026-07 – 2026-07
6804 30 00Hand sharpening or polishing stonesImporter12026-07 – 2026-07
7306 90 00Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm)Importer12026-07 – 2026-07
7318 14 99Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws)Importer12026-07 – 2026-07
7318 15 68Hexagonal-socket head screws and bolts, of iron or steel other than stainless "whether or not with their nuts and washers" (excl. wood screws, self-tapping screws and screws and bolts for fixing railway track construction material)Importer12026-07 – 2026-07
7318 15 95Screws and bolts, of iron or steel "whether or not with their nuts and washers", with heads (excl. with slotted, cross-recessed or hexagonal head; wood screws, self-tapping screws and screws and bolts for fixing railway track construction material, screw hooks and screw rings)Importer12026-07 – 2026-07
7318 16 60Self-locking nuts of iron or steel other than stainlessImporter12026-07 – 2026-07
7318 19 00Threaded articles, of iron or steel, n.e.s.Importer12026-07 – 2026-07
7318 22 00Washers of iron or steel (excl. spring washers and other lock washers)Importer12026-07 – 2026-07
7318 24 00Cotters and cotter pins, of iron or steelImporter12026-07 – 2026-07
7320 20 89Helical springs, of iron or steel (excl. hot-worked, coil compression and coil tension springs)Importer12026-07 – 2026-07
7320 90 90Springs and leaves for springs, of iron or steel (excl. discs springs, flat spiral springs, helical springs, leaf-springs and leaves therefor, clock and watch springs, springs for sticks and handles of umbrellas or parasols, and shock absorbers and torque rod or torsion bar springs of Section 17)Importer12026-07 – 2026-07
7326 90 98Articles of iron or steel, n.e.s.Importer12026-07 – 2026-07
8201 40 00Axes, billhooks and similar hewing tools, with working parts of base metal (excl. ice axes)Importer12026-07 – 2026-07
8201 50 00Secateurs and similar one-handed pruners and shears, incl. poultry shears, with working parts of base metalImporter12026-07 – 2026-07
8201 60 00Hedge shears, two-handed pruning shears and similar two-handed shears, with working parts of base metalImporter12026-07 – 2026-07
8201 90 00Scythes, sickles, hay knives, timber wedges and other hand tools of a kind used in agriculture, horticulture or forestry, with working parts of base metal (excl. spades, shovels, mattocks, picks, hoes, rakes, axes, billhooks and similar hewing tools, poultry shears, secateurs and similar one-handed pruners and shears, hedge shears, two-handed pruning shears and similar two-handed shears)Importer12026-07 – 2026-07
8202 10 00Handsaws, with working parts of base metal (excl. power-operated saws)Importer12026-07 – 2026-07
8203 10 00Files, rasps and similar hand tools of base metalImporter12026-07 – 2026-07
8203 20 00Pliers, incl. cutting pliers, pincers and tweezers for non-medical use and similar hand tools, of base metalImporter12026-07 – 2026-07
8204 11 00Hand-operated spanners and wrenches, incl. torque meter wrenches, of base metal, non-adjustableImporter12026-07 – 2026-07
8205 40 00Hand-operated screwdriversImporter12026-07 – 2026-07
8207 19 90Rock-drilling or earth-boring tools, interchangeable, with working parts of materials other than sintered metal carbide, cermets, diamond or agglomerated diamondImporter12026-07 – 2026-07
8207 90 99Tools, interchangeable, for use in mechanical or non-mechanical hand-held appliances, or for machine tools, for working materials other than metal, with working parts of materials other than diamond, agglomerated diamond, sintered metal carbide or cermets, n.e.s.Importer12026-07 – 2026-07
8208 40 00Knives and cutting blades, of base metal, for agricultural, horticultural or forestry machines (excl. those for wood-working)Importer12026-07 – 2026-07
8407 90 10Spark-ignition reciprocating or rotary internal combustion piston engine, of a cylinder capacity <= 250 cm (excl. those for aircraft or marine propulsion and reciprocating piston engine of a kind used for vehicles of chapter 87)Importer12026-07 – 2026-07
8407 90 90Spark-ignition reciprocating or rotary piston engine, of a cylinder capacity > 250 cm , of a power > 10 kW (other than engines of subheading 8407.90.50, reciprocating piston engine of a kind used for the propulsion of vehicles of chapter 87, aircraft engines and marine propulsion engines)Importer12026-07 – 2026-07
8409 91 00Parts suitable for use solely or principally with spark-ignition internal combustion piston engine, n.e.s.Importer12026-07 – 2026-07
8413 30 80Fuel, lubricating or cooling medium pumps for internal combustion piston engine (excl. injection pumps)Importer12026-07 – 2026-07
8413 70 51Radial flow centrifugal pumps with a discharge outlet diameter > 15 mm, single-stage, with single entry impeller, monobloc (excl. pumps of subheading 8413.11 and 8413.19, fuel, lubricating or cooling medium pumps for internal combustion piston engine, concrete pumps, submersible pumps and impeller pumps for heating systems and warm water supply)Importer12026-07 – 2026-07
8414 59 25Axial fans (excl. table, floor, wall, window, ceiling or roof fans, with a self-contained electric motor of an output <= 125 W, and fans for cooling IT equipment of 8414 59 15)Importer12026-07 – 2026-07
8414 59 35Centrifugal fans (excl. table, floor, wall, window, ceiling or roof fans, with a self-contained electric motor of an output <= 125 W, and fans for cooling IT equipment of 8414 59 15)Importer12026-07 – 2026-07
8414 59 95Fans (excl. table, floor, wall, window, ceiling or roof fans, with a self-contained electric motor of an output <= 125 W, axial and centrifugal fans, and fans for cooling IT equipment of 8414 59 15)Importer12026-07 – 2026-07
8414 90 00Parts of: air or vacuum pumps, air or other gas compressors, fans and ventilating or recycling hoods incorporating a fan, and gas-tight biological safety cabinets, n.e.s.Importer12026-07 – 2026-07
8421 23 00Oil or petrol-filters for internal combustion enginesImporter12026-07 – 2026-07
8421 31 00Intake air filters for internal combustion enginesImporter12026-07 – 2026-07
8424 30 08Water cleaning appliances with built-in motor, without heating deviceImporter12026-07 – 2026-07
8424 41 00Agricultural or horticultural sprayers, portableImporter12026-07 – 2026-07
8424 89 70Mechanical appliances, whether or not hand-operated, for projecting, dispersing or spraying liquids or powders, n.e.s.Importer12026-07 – 2026-07
8424 90 80Parts of fire extinguishers, spray guns and similar appliances, steam or sand blasting machines and similar jet projecting machines and machinery and apparatus for projecting, dispersing or spraying liquids or powders, n.e.s.Importer12026-07 – 2026-07
8432 29 10Scarifiers and cultivators for use in agriculture, horticulture and forestryImporter12026-07 – 2026-07
8432 29 90Weeders and hoes for use in agriculture, horticulture and forestry (excl. rotovators)Importer12026-07 – 2026-07
8432 90 00Parts of agricultural, horticultural or forestry machinery for soil preparation or cultivation or of lawn or sports-ground rollers, n.e.s.Importer12026-07 – 2026-07
8433 11 10Electric motor mowers for lawns, parks or sports grounds, with the cutting device rotating in a horizontal planeImporter12026-07 – 2026-07
8433 11 51Self-propelled mowers for lawns, parks or sports grounds, powered non-electrically, with the cutting device rotating in a horizontal plane, with a seatImporter12026-07 – 2026-07
8433 11 59Self-propelled mowers for lawns, parks or sports grounds, powered non-electrically, with the cutting device rotating in a horizontal plane, without a seatImporter12026-07 – 2026-07
8433 90 00Parts of harvesting machinery, threshing machinery, mowers and machines for cleaning, sorting or grading agricultural produce, n.e.s.Importer12026-07 – 2026-07
8460 39 00Sharpening "tool or cutter grinding" machines, not numerically controlledImporter12026-07 – 2026-07
8467 22 10Chainsaws for working in the hand, with self-contained electric motorImporter12026-07 – 2026-07
8467 29 20Electromechanical tools for working in the hand, with self-contained electric motor capable of operation without an external source of power (excl. saws and drills)Importer12026-07 – 2026-07
8467 29 80Hedge trimmers and lawn edge cutters, for working in the hand, with self-contained electric motor operating with an external source of powerImporter12026-07 – 2026-07
8467 81 00Chainsaws for working in the hand, with self-contained non-electric motorImporter12026-07 – 2026-07
8467 89 00Tools for working in the hand, hydraulic or with self-contained non-electric motor (excl. chainsaws and pneumatic tools)Importer12026-07 – 2026-07
8467 91 00Parts of chainsaws, for working in the hand, with self-contained electric or non-electric motor, n.e.s.Importer12026-07 – 2026-07
8467 99 00Parts of pneumatic tools for working in the hand, hydraulic or with self-contained electric or non-electric motor, n.e.s.Importer12026-07 – 2026-07
8479 89 97Machines, apparatus and mechanical appliances, n.e.s.Importer12026-07 – 2026-07
8481 80 79Globe valves (excl. valves of cast iron or steel, temperature regulators, pressure-reducing valves, valves for the control of oleohydraulic or pneumatic power transmission, check valves and safety or relief valves, process control valves, taps, cocks and valves for sinks, washbasins, bidets, water cisterns, baths and similar fixtures, and central heating radiator valves)Importer12026-07 – 2026-07
8482 10 10Ball bearings with greatest external diameter <= 30 mmImporter12026-07 – 2026-07
8482 40 00Needle roller bearings, incl. cage and needle roller assembliesImporter12026-07 – 2026-07
8483 10 29Cranks and crank shafts (excl. of open-die forged steel or cast iron or cast steel)Importer12026-07 – 2026-07
8483 10 95Main shafts or driving shafts, counter shafts, cam shafts, eccentric shafts and other transmission shafts (excl. cranks, crank shafts and articulated shafts)Importer12026-07 – 2026-07
8483 20 00Bearing housings, incorporating ball or roller bearings, for machineryImporter12026-07 – 2026-07
8483 40 21Spur and helical gears and gearing, for machinery (excl. friction gears, gear boxes and other speed changers)Importer12026-07 – 2026-07
8483 40 23Bevel and bevel-spur gears and gearing, for machinery (excl. friction gears, gear boxes and other speed changers)Importer12026-07 – 2026-07
8483 40 25Worm gear for machinery (excl. friction gears, gear boxes and other speed changers)Importer12026-07 – 2026-07
8483 40 29Gears and gearing, for machinery (excl. friction gears, spur, helical, bevel, bevel-spur gears and gearing and worm gear, gear boxes and other speed changers)Importer12026-07 – 2026-07
8483 40 51Gear boxes for machineryImporter12026-07 – 2026-07
8483 50 80Flywheels and pulleys, incl. pulley blocks (excl. of cast iron or cast steel)Importer12026-07 – 2026-07
8483 60 80Clutches and shaft couplings, incl. universal joints (excl. of cast iron or cast steel)Importer12026-07 – 2026-07
8483 90 81Toothed wheels, chain sprockets and other transmission elements presented separately and parts of transmission shafts and cranks; bearing housings and plain shaft bearings; gears and gearing, ball or roller screws, gear boxes and other speed changers, flywheels and pulleys, clutches and shaft couplings, of cast iron or cast steel, n.e.s.Importer12026-07 – 2026-07
8483 90 89Toothed wheels, chain sprockets and other transmission elements presented separately and parts of transmission shafts and cranks; bearing housings and plain shaft bearings; gears and gearing, ball or roller screws, gear boxes and other speed changers, flywheels and pulleys, clutches and shaft couplings, n.e.s. (excl. of cast iron or cast steel)Importer12026-07 – 2026-07
8501 20 00Universal AC-DC motors of an output > 37,5 WImporter12026-07 – 2026-07
8501 31 00DC motors of an output > 37,5 W but <= 750 W and DC generators of an output <= 750 W (excl. photovoltaic generators)Importer12026-07 – 2026-07
8501 32 00DC motors and DC generators of an output > 750 W but <= 75 kW (excl. photovoltaic generators)Importer12026-07 – 2026-07
8504 40 60Accumulator chargers (excl. polycrystalline semiconductor rectifiers)Importer12026-07 – 2026-07
8504 40 83RectifiersImporter12026-07 – 2026-07
8505 19 90Permanent magnets and articles intended to become permanent magnets after magnetization, of materials other than metal or agglomerated ferriteImporter12026-07 – 2026-07
8505 20 00Electromagnetic couplings, clutches and brakesImporter12026-07 – 2026-07
8507 60 00Lithium-ion accumulators (excl. spent)Importer12026-07 – 2026-07
8508 11 00Vacuum cleaners, incl. dry cleaners and wet vacuum cleaners, with self-contained electric motor, power <= 1 500 W and having a dust bag or other receptacle capacity <= 20 lImporter12026-07 – 2026-07
8508 60 00Vacuum cleaners, incl. dry cleaners and wet vacuum cleaners (excl. with self-contained electric motor)Importer12026-07 – 2026-07
8511 10 00Sparking plugs of a kind used for spark-ignition or compression-ignition internal combustion enginesImporter12026-07 – 2026-07
8511 20 00Ignition magnetos, magneto-dynamos and magnetic flywheels, for spark-ignition or compression-ignition internal combustion enginesImporter12026-07 – 2026-07
8511 80 00Electrical ignition or starting equipment, incl. cut-outs, of a kind used for spark-ignition or compression-ignition internal combustion engines (excl. generators, starter motors, distributors, ignition coils, ignition magnetos, magnetic flywheels and sparking plugs)Importer12026-07 – 2026-07
8517 62 00Machines for the reception, conversion and transmission or regeneration of voice, images or other data, incl. switching and routing apparatus (excl. telephone sets, telephones for cellular networks or for other wireless networks)Importer12026-07 – 2026-07
8518 10 00Microphones and stands therefor (excl. cordless microphones with built-in transmitter)Importer12026-07 – 2026-07
8518 30 00Headphones and earphones, whether or not combined with microphone, and sets consisting of a microphone and one or more loudspeakers (excl. telephone sets, hearing aids and helmets with built-in headphones, whether or not incorporating a microphone)Importer12026-07 – 2026-07
8537 10 91Programmable memory controllers (excl. numerical control panels with built-in automatic data-processing machines)Importer12026-07 – 2026-07
8537 10 98Boards, cabinets and similar combinations of apparatus for electric control or the distribution of electricity, for a voltage <= 1.000 V (excl. switching apparatus for line telephony or line telegraphy, numerical control panels with built-in automatic data-processing machines, programmable memory controllers and touch screens)Importer12026-07 – 2026-07
8539 52 00Light-emitting diode "LED" lampsImporter12026-07 – 2026-07
8544 42 90Electric conductors, for a voltage <= 1.000 V, insulated, fitted with connectors, n.e.s. (other than of a kind used for telecommunications)Importer12026-07 – 2026-07
8716 90 90Parts of trailers, semi-trailers and other vehicles not mechanically propelled, n.e.s. (excl. chassis, bodies and axles)Importer12026-07 – 2026-07
9004 90 10Spectacles, goggles and the like, corrective, protective or other, with lenses of plastics (excl. spectacles for testing eyesight, sunglasses, contact lenses, spectacle lenses and frames and mountings for spectacles)Importer12026-07 – 2026-07
9029 10 00Revolution counters, production counters, taximeters, milometers, pedometers and the like (excl. gas, liquid and electricity meters)Importer12026-07 – 2026-07
9031 80 80Non-optical instruments, appliances and machines for measuring or checking, n.e.s. in Ch 90Importer12026-07 – 2026-07
9403 99 10Parts of furniture, of metal, n.e.s. (excl. of seats or medical, surgical, dental or veterinary furniture)Importer12026-07 – 2026-07
9503 00 75Plastic toys and models, incorporating a motor (excl. electric trains, scale model assembly kits, and toys representing animals, human or non-human creatures)Importer12026-07 – 2026-07
9603 50 00Brushes constituting parts of machines, appliances or vehiclesImporter12026-07 – 2026-07