A filled cell is a month with at least one published link in the loaded scope. A gap is a month with no published link, not a month without trade.
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
Published in 127 months between 2016-01 and 2026-07. Each published month is listed with its commodity code count in the table above.
at least one published link
no published link in this month
outside the loaded window
swap_horizPublished as both an importer and an exporter, against 179 commodity codes across 19 tariff chapters.
event_availablePublished in every one of the 127 months from January 2016 to July 2026, without a gap.
scatter_plotSpread across 19 tariff chapters, none of them holding half the loaded codes.
south_westThe chapter 40 codes are import only.
What it trades
Grouped by tariff chapter, most published codes first. Descriptions are HMRC’s own, verbatim. This list is bounded: codes outside the loaded coverage are not listed.
inventory_2Chapter 84Published 2016-01 to 2026-0759of 179 loaded codes33%
8481 80 81Ball and plug valves for pipes, boiler shells, tanks, vats or the like (excl. taps, cocks and valves for sinks, washbasins, bidets, water cisterns, baths and similar fixtures, and central heating radiator valves)ImportExport127months published, 2016-01 to 2026-07
8481 90 00Parts of valves and similar articles for pipes, boiler shells, tanks, vats or the like, n.e.s.ImportExport96months published, 2016-01 to 2026-07
8481 40 90Safety or relief valves (excl. those of cast iron or steel)ImportExport73months published, 2020-01 to 2026-07
8481 80 11Mixing valves for sinks, washbasins, bidets, water cisterns, baths and similar fixturesImportExport68months published, 2016-01 to 2026-05
Show the 59 sampled codesShow fewer codesexpand_moreexpand_less
8413 91 00Parts of pumps for liquids, n.e.s.Import66months published, 2017-05 to 2026-07
8481 40 10Safety or relief valves of cast iron or of steelImport
inventory_2Chapter 39Published 2016-01 to 2026-0735of 179 loaded codes20%
3917 32 00Flexible tubes, pipes and hoses of plastics, not reinforced or otherwise combined with other materials, without fittingsImportExport
inventory_2Chapter 85Published 2016-01 to 2026-0728of 179 loaded codes16%
8536 50 80Switches for a voltage of > 60 V and <= 1.000 V (excl. relays, automatic circuit breakers, electronic AC switches consisting of optically coupled input and output circuits "insulated thyristor AC switches", electronic switches, incl. temperature protected electronic switches, consisting of a transistor and a logic chip [chip-on-chip technology] and electromechanical snap-action switches for a currImport
inventory_2Chapter 90Published 2016-02 to 2026-0318of 179 loaded codes10%
9026 10 21Electronic flow meters for measuring or checking the flow or level of liquids (excl. meters and regulators)Import
inventory_2Chapter 73Published 2016-01 to 2025-1215of 179 loaded codes8%
7307 99 80Tube or pipe fittings, of iron or steel (excl. of cast iron or stainless steel, threaded, butt welding fittings, and flanges)ImportExport
inventory_2Chapter 40Published 2016-07 to 2025-033of 179 loaded codes2%
4016 99 97Articles of vulcanised rubber, n.e.s. (excl. hard rubber and those of cellular rubber)Import5
inventory_2Chapter 68Published 2020-04 to 2026-073of 179 loaded codes2%
6815 19 00Articles of graphite or carbon, for non-electrical purposes (excl. carbon fibres and articles of carbon fibres)Import3
inventory_2Chapter 72Published 2016-11 to 2018-073of 179 loaded codes2%
7222 40 90Angles, shapes and sections of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s.Import
inventory_2Chapter 83Published 2016-05 to 2025-013of 179 loaded codes2%
8302 60 00Automatic door closers of base metalImport3
inventory_2Chapter 76Published 2017-05 to 2024-112of 179 loaded codes1%
7612 90 20Containers of a kind used for aerosols, of aluminiumImport1
inventory_2Chapter 82Published 2017-10 to 2026-022of 179 loaded codes1%
8208 90 00Knives and cutting blades, of base metal, for machines or for mechanical appliances (excl. those for metal or wood-working, kitchen appliances or machines used by the food industry and those for agricultural, horticultural or forestry machines)Import
inventory_2Chapter 30Published 2024-05 to 2024-051of 179 loaded codes1%
3002 12 00Antisera and other blood fractionsImport1
inventory_2Chapter 32Published 2025-03 to 2026-041of 179 loaded codes1%
3214 10 10Glaziers' putty, grafting putty, resin cements, caulking compounds and other masticsExport3
inventory_2Chapter 34Published 2024-06 to 2024-061of 179 loaded codes1%
3403 99 00Lubricant preparations, incl. cutting-oil preparations, bolt or nut release preparations, anti-rust or anti-corrosion preparations and mould-release preparations, based on lubricants but not containing petroleum oil or bituminous mineral oil (excl. preparations for the treatment of textiles, leather, furskins and other materials)Import
inventory_2Chapter 48Published 2020-09 to 2020-091of 179 loaded codes1%
inventory_2Chapter 49Published 2023-11 to 2023-111of 179 loaded codes1%
4911 10 90Trade advertising material and the like (other than commercial catalogues)Import1
inventory_2Chapter 59Published 2018-11 to 2023-031of 179 loaded codes1%
5906 10 00Adhesive tape of rubberised textile fabrics, of a width of <= 20 cm (excl. that impregnated or coated with pharmaceutical substances or put up for retail sale for medical, surgical, dental or veterinary purposes)ImportExport
inventory_2Chapter 86Published 2016-06 to 2016-061of 179 loaded codes1%
inventory_2Chapter 87Published 2018-06 to 2018-061of 179 loaded codes1%
8704 90 00Motor vehicles for the transport of goods, with engines other than internal combustion piston engine or electric motor (excl. dumpers for off-highway use of subheading 8704.10 and special purpose motor vehicles of heading 8705)Import
Export
65months published, 2020-01 to 2026-04
8484 10 00Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metalImportExport54months published, 2016-01 to 2025-01
8481 80 99Appliances for pipes, boiler shells, tanks, vats or the like (excl. pressure-reducing valves, valves for the control of pneumatic power transmission, check "non-return" valves, safety or relief valves, taps, cocks and valves for sinks, baths and similar fixtures, central heating radiator valves, valves for pneumatic tyres and inner-tubes, process control valves, globe valves, gate valves, ball andImportExport50months published, 2016-02 to 2026-07
8412 39 00Pneumatic power engines and motors (excl. linear acting)ImportExport39months published, 2016-03 to 2026-07
8413 70 81Single-stage centrifugal pumps, power-driven, with a discharge outlet diameter > 15 mm (excl. pumps of subheading 8413.11 and 8413.19; fuel, lubricating or cooling medium pumps for internal combustion piston engine; concrete pumps; submersible pumps; impeller pumps for heating systems and warm water supply; channel impeller, side channel and general radial flow pumps)Import18months published, 2018-08 to 2025-11
8481 30 91Check "non-return" valves for pipes, boiler shells, tanks, vats or the like, of cast iron or of steelImportExport15months published, 2022-01 to 2026-04
8481 80 73Globe valves of steel (excl. temperature regulators, pressure-reducing valves, valves for the control of oleohydraulic or pneumatic power transmission, check valves and safety or relief valves, process control valves, taps, cocks and valves for sinks, washbasins, bidets, water cisterns, baths and similar fixtures, and central heating radiator valves)ImportExport11months published, 2022-02 to 2026-07
8413 70 21Submersible pumps, single-stageImport9months published, 2019-02 to 2022-04
8413 70 89Multi-stage centrifugal pumps, power-driven, with a discharge outlet diameter > 15 mm (excl. pumps of subheading 8413.11 and 8413.19; fuel, lubricating or cooling medium pumps for internal combustion piston engine; concrete pumps; submersible pumps; impeller pumps for heating systems and warm water supply; channel impeller, side channel and general radial flow pumps)Import8months published, 2017-05 to 2025-09
8481 30 99Check "non-return" valves for pipes, boiler shells, tanks, vats or the like (excl. those of cast iron or steel)ImportExport8months published, 2021-04 to 2026-07
8484 90 00Sets or assortments of gaskets and similar joints, dissimilar in composition, put up in pouches, envelopes or similar packingsImportExport8months published, 2016-02 to 2022-11
8479 90 70Parts of machines and mechanical appliances having individual functions, n.e.s. (excl. of cast iron or cast steel)ImportExport7months published, 2021-10 to 2025-11
8481 80 87Diaphragm valves for pipes, boiler shells, tanks, vats or the likeImportExport7months published, 2017-03 to 2026-03
8471 30 00Data-processing machines, automatic, portable, weighing <= 10 kg, consisting of at least a central processing unit, a keyboard and a display (excl. peripheral units)ImportExport5months published, 2025-03 to 2025-12
8481 80 63Gate valves of steel for pipes, boiler shells, tanks, vats or the like (excl. taps, cocks and valves for sinks, washbasins, bidets, water cisterns, baths and similar fixtures and central heating radiator valves)Import5months published, 2022-01 to 2026-01
8413 92 00Parts of liquid elevators, n.e.s.Import4months published, 2018-03 to 2022-03
8481 10 05Pressure-reducing valves combined with filters or lubricatorsImportExport4months published, 2017-01 to 2022-05
8481 80 85Butterfly valves for pipes, boiler shells, tanks, vats or the like (excl. check valves)ImportExport4months published, 2022-02 to 2023-04
8413 70 30Glandless impeller pumps for heating systems and warm water supplyImport3months published, 2018-07 to 2022-05
8421 29 80Machinery and apparatus for filtering or purifying liquids (excl. such machinery and apparatus for water and other beverages, oil or petrol filters for internal combustion engines, artificial kidneys, and those made of fluoropolymers with filter or purifier membrane thickness <= 140 ?m)ImportExport3months published, 2022-03 to 2023-03
8422 90 90Parts of packing or wrapping machinery and of other machinery of heading 8422, n.e.s. (excl. parts of dishwashing machines)Import3months published, 2019-10 to 2024-10
8481 10 19Pressure-reducing valves of cast iron or of steel (not combined with filters or lubricators)ImportExport3months published, 2023-06 to 2026-07
8404 10 00Auxiliary plant for use with boilers of heading 8402 or 8403, e.g. economizers, superheaters, soot removers and gas recoverers;Import2months published, 2025-09 to 2026-06
8421 99 90Parts of machinery and apparatus for filtering or purifying liquids or gases, n.e.s.Import2months published, 2021-04 to 2021-12
8431 10 00Parts of pulley tackles and hoists (other than skip hoists), winches, capstans and jacks, n.e.s.Export2months published, 2019-03 to 2019-05
8434 10 00Milking machinesImport2months published, 2018-06 to 2019-05
8466 94 00Parts and accessories for machine tools for working metal without removing material, n.e.s.ImportExport2months published, 2016-05 to 2024-09
8473 30 80Parts and accessories of automatic data-processing machines or for other machines of heading 8471, n.e.s. (excl. electronic assemblies)Import2months published, 2025-02 to 2025-11
8481 80 19Taps, cocks and valves for sinks, washbasins, bidets, water cisterns, baths and similar fixtures (excl. mixing valves)ImportExport2months published, 2023-04 to 2024-04
8481 80 59Process control valves (excl. temperature regulators, pressure-reducing valves, valves for the control of oleohydraulic or pneumatic power transmission, check valves and safety or relief valves, taps, cocks and valves for sinks, washbasins, bidets, water cisterns, baths and similar fixtures and central heating radiator valves)Import2months published, 2024-04 to 2025-01
8486 90 00Parts and accessories for machines and apparatus of a kind used solely or principally for the manufacture of semiconductor boules or wafers, semiconductor devices, electronic integrated circuits or flat panel displays, and for machines and apparatus specified in note 11 C to chapter 84, n.e.s.Import2months published, 2023-07 to 2024-08
8412 90 80Parts of non-electrical engines and motors, n.e.s.Import1months published, 2024-05 to 2024-05
8413 11 00Pumps fitted or designed to be fitted with a measuring device, for dispensing fuel or lubricants, of the type used in filling stations or in garagesImport1months published, 2020-04 to 2020-04
8413 70 29Submersible pumps, multi-stageImport1months published, 2019-03 to 2019-03
8419 50 80Heat-exchange units (excl. those used with boilers and those made of fluoropolymers with inlet and outlet tube bores with inside diameters measuring <=3 cm)Import1months published, 2022-10 to 2022-10
8419 90 85Parts of machinery, plant and laboratory equipment, whether or not electrically heated, for the treatment of materials by a process involving a change of temperature, and of non-electric instantaneous and storage water heaters, n.e.s. (excl. of medical, surgical or laboratory sterilizers, those for the manufacture of semiconductor boules or wafers, semiconductor devices, electronic integrated circImport1months published, 2017-11 to 2017-11
8421 11 00Centrifugal cream separatorsExport1months published, 2017-04 to 2017-04
8421 19 20Centrifuges of a kind used in laboratoriesExport1months published, 2025-06 to 2025-06
8421 23 00Oil or petrol-filters for internal combustion enginesImport1months published, 2025-09 to 2025-09
8421 29 00Machinery and apparatus for filtering or purifying liquids (excl. such machinery and apparatus for water and other beverages, oil or petrol-filters for internal combustion engines and artificial kidneys)Import1months published, 2016-01 to 2016-01
8422 30 00Machinery for filling, closing, sealing or labelling bottles, cans, boxes, bags or other containers; machinery for capsuling bottles, jars, tubes and similar containers; machinery for aerating beveragesImport1months published, 2024-10 to 2024-10
8424 30 01Water cleaning appliances with built-in motor, with heating deviceImport1months published, 2016-08 to 2016-08
8424 30 90Steam or sand blasting machines and similar jet projecting machines (excl. compressed air operated and water cleaning appliances with built-in motor and appliances for cleaning special containers)Import1months published, 2023-09 to 2023-09
8441 90 90Parts of machinery for making up paper pulp, paper or paperboard, n.e.s.Import1months published, 2023-09 to 2023-09
8448 59 00Parts and accessories of machines of heading 8447, n.e.s.Import1months published, 2024-10 to 2024-10
8466 91 95Parts and accessories for machine tools for working stone, ceramics, concrete, asbestos-cement or like mineral materials or for cold-working glass, n.e.s. (excl. of cast iron or cast steel)Import1months published, 2016-05 to 2016-05
8466 93 40Parts and accessories of machines of subheadings 84561110, 84561210, 845620, 845630, 845710, 845891, 84592100, 845961 or 846150 of a kind used solely or principally for the manufacture of printed circuits, printed circuit assemblies, parts of heading 8517, or parts of automatic data processing machinesExport1months published, 2020-08 to 2020-08
8475 90 90Parts of machines for assembling electric or electronic lamps, tubes or valves or flashbulbs, in glass envelopes and of machines for manufacturing or hot working glass or glassware, n.e.s.Export1months published, 2018-06 to 2018-06
8481 10 99Pressure-reducing valves of base metal (not combined with filters or lubricators)Export1months published, 2021-02 to 2021-02
8481 80 79Globe valves (excl. valves of cast iron or steel, temperature regulators, pressure-reducing valves, valves for the control of oleohydraulic or pneumatic power transmission, check valves and safety or relief valves, process control valves, taps, cocks and valves for sinks, washbasins, bidets, water cisterns, baths and similar fixtures, and central heating radiator valves)Import1months published, 2026-02 to 2026-02
8483 10 50Articulated shaftsImport1months published, 2024-07 to 2024-07
8483 30 80Plain shaft bearings for machineryImport1months published, 2023-11 to 2023-11
8484 20 00Mechanical sealsExport1months published, 2023-10 to 2023-10
94
months published, 2016-11 to 2026-07
3917 40 00Fittings, e.g. joints, elbows, flanges, of plastics, for tubes, pipes and hosesImportExport54months published, 2016-05 to 2026-05
3917 33 00Flexible tubes, pipes and hoses of plastics, not reinforced or otherwise combined with other materials, with fittings, seals or connectorsImportExport46months published, 2022-05 to 2026-07
3917 39 00Flexible tubes, pipes and hoses, of plastics, reinforced or otherwise combined with other materials (excl. those with a burst pressure of >= 27,6 MPa)ImportExport42months published, 2018-09 to 2026-02
Show the 35 sampled codesShow fewer codesexpand_moreexpand_less
3926 90 97Articles of plastics and articles of other materials of heading 3901 to 3914, n.e.s.ImportExport34months published, 2016-08 to 2026-03
3919 10 80Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, in rolls <= 20 cm wide (excl. plastic strips coated with unvulcanised natural or synthetic rubber)ImportExport20months published, 2021-08 to 2026-07
3923 30 10Carboys, bottles, flasks and similar articles for the conveyance or packaging of goods, of plastics, with a capacity of <= 2 lImport16months published, 2022-03 to 2026-03
3923 21 00Sacks and bags, incl. cones, of polymers of ethyleneImport10months published, 2018-12 to 2026-03
3923 30 90Carboys, bottles, flasks and similar articles for the conveyance or packaging of goods, of plastics, with a capacity of > 2 lImport10months published, 2022-11 to 2025-10
3917 10 90Artificial guts "sausage casings" of cellulose materialsImportExport5months published, 2017-11 to 2022-10
3917 22 90Rigid tubes, pipes and hoses, of polymers of propylene (excl. seamless and cut to length only)Import5months published, 2018-08 to 2021-11
3921 19 00Plates, sheets, film, foil and strip, of cellular plastic, unworked or merely surface-worked or merely cut into squares or rectangles (excl.those of polymers of styrene, vinyl chloride, polyurethanes and regenerated cellulose, self-adhesive products, floor, wall and ceiling coverings of heading 3918 and sterile surgical or dental adhesion barriers of subheading 3006.10.30)ImportExport5months published, 2018-04 to 2026-03
3919 90 80Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls > 20 cm wide (excl. floor, wall and ceiling coverings of heading 3918, and circular polishing pads used in semiconductor wafer production))Import3months published, 2025-12 to 2026-05
3917 10 10Artificial guts "sausage casings" of hardened proteinImportExport2months published, 2018-04 to 2022-04
3917 29 00Rigid tubes, pipes and hoses, of plastics (excl. those of polymers of ethylene, propylene and vinyl chloride)Import2months published, 2025-06 to 2026-01
3920 99 90Plates, sheets, film, foil and strip, of non-cellular plastics, n.e.s., not reinforced, laminated, supported or similarly combined with other materials, without backing, unworked or merely surface-worked or merely cut into squares or rectangles (excl. self-adhesive products, those of addition polymerization, condensation and rearrangement polymerization products, floor, wall and ceiling coveringsExport2months published, 2025-10 to 2026-03
3921 11 00Plates, sheets, film, foil and strip, of cellular polymers of styrene, unworked or merely surface-worked or merely cut into squares or rectangles (excl. self-adhesive products, floor, wall and ceiling coverings of heading 3918 and sterile surgical or dental adhesion barriers of subheading 3006.10.30)Export2months published, 2019-11 to 2025-07
3923 10 10Boxes, cases, crates and similar articles, of plastic, specially shaped or fitted for the conveyance or packing of semiconductor wafers, masks, or reticlesImport2months published, 2022-02 to 2024-03
3923 10 90Boxes, cases, crates and similar articles for the conveyance or packaging of goods, of plastics (excl. special ones for semiconductor wafers, masks or reticles)Import2months published, 2021-09 to 2022-07
3923 29 10Sacks and bags, incl. cones, of poly"vinyl chloride"Import2months published, 2019-02 to 2025-12
3923 29 90Sacks and bags, incl. cones, of plastics (excl. those of poly"vinyl chloride" and polymers of ethylene)Import2months published, 2023-07 to 2025-05
3926 90 50Perforated buckets and similar articles used to filter water at the entrance to drains, of plasticsImport2months published, 2019-11 to 2019-12
3926 90 92Articles made from plastic sheet, n.e.s.Import2months published, 2016-01 to 2019-02
3901 10 90Polyethylene with a specific gravity of < 0,94, in primary forms (excl. linear polyethylene)Import1months published, 2026-03 to 2026-03
3903 30 00Acrylonitrile-butadiene-styrene copolymers "ABS", in primary formsImport1months published, 2024-03 to 2024-03
3907 40 00Polycarbonates, in primary formsImport1months published, 2023-09 to 2023-09
3907 99 10Poly"ethylene naphthalene-2,6-dicarboxylate", saturated, in primary formsImport1months published, 2026-03 to 2026-03
3913 90 00Natural polymers and modified natural polymers, e.g. hardened proteins, chemical derivatives of natural rubber, n.e.s., in primary forms (excl. alginic acid and its salts and esters)Export1months published, 2023-05 to 2023-05
3917 21 10Rigid tubes, pipes and hoses, of polymers of ethylene, seamless and of a length > the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise workedExport1months published, 2024-05 to 2024-05
3919 10 12Plastic strips of poly"vinyl chloride" or of polyethylene, coated with unvulcanised natural or synthetic rubber, self-adhesive, in rolls <= 20 cm wideExport1months published, 2018-10 to 2018-10
3920 10 89Plates, sheets, film, foil, tape, strip, of unexpanded polymers of ethylene, not reinforced and non-cellular "laminated" or supported or similarly combined with other materials, unworked or not further worked than surface-worked or only cut to square or rectangular shapes, with a thickness of > 0,125 mm (other than self-adhesive and floor, wall and ceiling coverings of heading 3918, and syntheticImportExport1months published, 2026-03 to 2026-03
3920 62 19Plates, sheets, film, foil and strip, of non-cellular poly"ethylene terephthalate", not reinforced, laminated, supported or similarly combined with other materials, without support, unworked or not further worked than surface-worked or merely cut into squares or rectangles, of a thickness of <= 0,35 mm (excl. such self-adhesive products, floor, wall and ceiling coverings of heading 3918, poly"ethyExport1months published, 2024-06 to 2024-06
3920 92 00Plates, sheets, film, foil and strip, of non-cellular polyamides, not reinforced, laminated, supported or similarly combined with other materials, without backing, unworked or merely surface-worked or merely cut into squares or rectangles (excl. self-adhesive products, floor, wall and ceiling coverings of heading 3918)Export1months published, 2026-03 to 2026-03
3921 90 90Plates, sheets, film, foil and strip, of plastics, reinforced, laminated, supported or similarly combined with other materials, unworked or merely surface-worked or merely cut into squares or rectangles (excl. of cellular plastic, addition polymerization products, condensation polymerization products and rearrangement polymerization products; self-adhesive products and floor, wall and ceiling coveImport1months published, 2023-10 to 2023-10
3923 90 00Articles for the conveyance or packaging of goods, of plastics (excl. boxes, cases, crates and similar articles; sacks and bags, incl. cones; carboys, bottles, flasks and similar articles; spools, spindles, bobbins and similar supports; stoppers, lids, caps and other closures)Import1months published, 2022-01 to 2022-01
23
months published, 2018-03 to 2026-07
8531 90 00Parts of electric sound or visual signalling apparatus, n.e.s.Import9months published, 2024-07 to 2026-07
8547 10 00Insulating fittings for electrical purposes, of ceramicsExport5months published, 2018-09 to 2020-02
8501 61 80AC generators "alternators", of an output > 7,5 kVA but <= 75 kVA (excl. photovoltaic generators)Import4months published, 2018-08 to 2020-05
Show the 28 sampled codesShow fewer codesexpand_moreexpand_less
8536 90 95Electrical apparatus for making connections to or in electrical circuits, for a voltage <= 1.000 V (excl. fuses, circuit breakers and other apparatus for protecting electrical circuits, relays and other switches, lamp holders, plugs and sockets, prefabricated elements for electrical circuits, connections and contact elements for wire and cables, and car battery clamps)Import3months published, 2019-07 to 2020-06
8544 70 00Optical fibre cables made up of individually sheathed fibres, whether or not containing electric conductors or fitted with connectorsImport3months published, 2016-01 to 2022-08
8501 61 20AC generators "alternators", of an output <= 7,5 kVA (excl. photovoltaic generators)Import2months published, 2018-11 to 2020-09
8517 13 00Smartphones for wireless networksImportExport2months published, 2024-12 to 2026-01
8523 80 90Media, recorded, incl. matrices and masters for the production of discs (excl. magnetic, optical and semiconductor media, and products of chapter 37)ImportExport2months published, 2017-12 to 2021-03
8537 10 98Boards, cabinets and similar combinations of apparatus for electric control or the distribution of electricity, for a voltage <= 1.000 V (excl. switching apparatus for line telephony or line telegraphy, numerical control panels with built-in automatic data-processing machines, programmable memory controllers and touch screens)ImportExport2months published, 2023-10 to 2025-03
8544 11 10Winding wire for electrical purposes, of copper, lacquered or enamelledExport2months published, 2020-07 to 2020-09
8547 20 00Insulating fittings for electrical purposes, of plasticsExport2months published, 2019-10 to 2025-07
8504 40 86Inverters having power handling capacity > 7,5 kVAImport1months published, 2025-08 to 2025-08
8504 40 90Static converters (excl. of a kind used with telecommunication apparatus, automatic data-processing machines and units thereof, battery chargers, polycrystalline semiconductor and other rectifiers, and a.c. converters)Import1months published, 2020-12 to 2020-12
8504 40 95Static converters (excl. accumulator chargers, rectifiers, and inverters)Import1months published, 2025-01 to 2025-01
8516 10 80Electric water heaters and immersion heaters (excl. instantaneous water heaters)Import1months published, 2022-11 to 2022-11
8517 14 00Telephones for cellular networks or for other wireless networks (excl. line telephone sets with cordless handsets, and smartphones)Export1months published, 2026-01 to 2026-01
8523 80 10Media for the recording of sound or of other phenomena, unrecorded, incl. matrices and masters for the production of discs (excl. magnetic, optical and semiconductor media, and products of chapter 37)Export1months published, 2019-03 to 2019-03
8536 50 03Electronic AC switches consisting of optically coupled input and output circuits "insulated thyristor AC switches" (excl. relays and automatic circuit breakers)Export1months published, 2022-06 to 2022-06
8536 50 07Electromechanical snap-action switches for a current <= 11 A (excl. relays and automatic circuit breakers)Import1months published, 2020-11 to 2020-11
8536 50 19Switches for a voltage of <= 60 V (excl. relays, push-button switches and rotary switches)Import1months published, 2022-07 to 2022-07
8536 61 10Edison lamp holders, electricImport1months published, 2018-09 to 2018-09
8536 90 01Prefabricated elements for electrical circuits, for a voltage of <= 1.000 VExport1months published, 2022-03 to 2022-03
8538 90 99Parts suitable for use solely or principally with the apparatus of heading 8535, 8536 or 8537, n.e.s. (excl. electronic assemblies, and boards, panels, consoles, desks, cabinets and other bases for the goods of heading 8537, not equipped with their apparatus, and for wafer probers)Export1months published, 2019-10 to 2019-10
8539 90 90Parts of electric filament or discharge lamps, sealed beam lamp units, ultraviolet or infra-red lamps, arc lamps and LED light sources, n.e.s.Import1months published, 2024-03 to 2024-03
8542 31 90Electronic integrated circuits as processors and controllers, whether or not combined with memories, converters, logic circuits, amplifiers, clock and timing circuits, or other circuits (excl. in the form of multichip or multi-component integrated circuits)Import1months published, 2024-03 to 2024-03
8546 10 00Electrical insulators of glass (excl. insulating fittings)Export1months published, 2020-04 to 2020-04
8547 90 00Insulating fittings for electrical purposes, of materials other than ceramics or plastics; electrical conduit tubing and joints therefor, of base metal lined with insulating materialExport1months published, 2020-07 to 2020-07
31
months published, 2019-02 to 2025-08
9032 89 00Regulating or controlling instruments and apparatus (excl. hydraulic or pneumatic, manostats, thermostats, and taps, cocks and valves of heading 8481)Import27months published, 2016-03 to 2024-04
9032 90 00Parts and accessories for regulating or controlling instruments and apparatus, n.e.s.ImportExport12months published, 2016-02 to 2026-03
9026 90 00Parts and accessories for instruments and apparatus for measuring or checking the flow, level, pressure or other variables of liquids or gases, n.e.s.Import9months published, 2019-04 to 2024-01
Show the 18 sampled codesShow fewer codesexpand_moreexpand_less
9026 10 89Instruments and apparatus for measuring or checking the flow or level of liquids, non-electronic (excl. flow meters, meters and regulators)Import7months published, 2019-02 to 2024-11
9018 31 10Syringes of plastics, with or without needles, used in medical, surgical, dental or veterinary sciencesImport4months published, 2025-09 to 2026-03
9026 20 40Spiral or metal diaphragm type pressure gaugesImport4months published, 2022-01 to 2022-04
9018 90 84Instruments and appliances used in medical, surgical or veterinary sciences, n.e.s.Import2months published, 2019-09 to 2022-05
9026 10 29Electronic instruments and apparatus for measuring or checking the flow or level of liquids (excl. flow meters, meters and regulators)Import2months published, 2019-07 to 2022-03
9026 20 20Electronic instruments and apparatus for measuring or checking pressure of liquids or gases (excl. regulators)ImportExport2months published, 2022-10 to 2024-12
9026 20 80Instruments and apparatus for measuring or checking pressure of liquids or gases, non-electronic (excl. spiral or metal diaphragm type pressure gauges, and regulators)Import2months published, 2020-04 to 2022-04
9018 31 90Syringes, with or without needles, used in medical, surgical, dental or veterinary sciences (excl. of plastic)Import1months published, 2025-05 to 2025-05
9018 32 10Tubular metal needles, used in medical, surgical, dental or veterinary sciencesImport1months published, 2025-01 to 2025-01
9025 90 00Parts and accessories for hydrometers, areometers and similar floating instruments, thermometers, pyrometers, barometers, hygrometers and psychrometers, n.e.s.Import1months published, 2021-11 to 2021-11
9026 10 81Flow meters for measuring or checking the flow or level of liquids, non-electronic (excl. meters and regulators)Import1months published, 2018-04 to 2018-04
9027 10 10Electronic gas or smoke analysis apparatusImport1months published, 2019-04 to 2019-04
9027 90 00Microtomes; parts and accessories of instruments and apparatus for physical or chemical analysis, instruments and apparatus for measuring or checking viscosity, porosity, expansion, surface tension or the like, instruments and apparatus for measuring or checking quantities of heat, sound or light, and of microtomes, n.e.s.Import1months published, 2025-05 to 2025-05
9032 20 00Manostats (excl. taps, cocks and valves of heading 8481)Import1months published, 2022-01 to 2022-01
42
months published, 2016-01 to 2025-07
7326 90 98Articles of iron or steel, n.e.s.ImportExport22months published, 2016-03 to 2019-07
7307 29 80Tube or pipe fittings of stainless steel (excl. cast, threaded, butt welding fittings and flanges)Import10months published, 2018-09 to 2025-12
7307 29 10Threaded tube or pipe fittings of stainless steel (excl. cast products, flanges, elbows, bends and sleeves)Import7months published, 2022-01 to 2024-01
Show the 15 sampled codesShow fewer codesexpand_moreexpand_less
7304 90 00Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron)Import5months published, 2016-02 to 2025-06
7304 41 00Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas)Import2months published, 2020-01 to 2020-05
7305 90 00Tubes and pipes having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel, welded (excl. welded products or products of a kind used for oil or gas pipelines or of a kind used in drilling for oil or gas)ImportExport2months published, 2018-03 to 2019-11
7306 90 00Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm)Import2months published, 2016-07 to 2017-02
7318 29 00Non-threaded articles, of iron or steelImport2months published, 2016-08 to 2016-11
7324 90 00Sanitary ware, incl. parts thereof (excl. cans, boxes and similar containers of heading 7310, small wall cabinets for medical supplies or toiletries and other furniture of chapter 94, and fittings, complete sinks and washbasins, of stainless steel, complete baths and fittings)ImportExport2months published, 2016-06 to 2019-09
7301 10 00Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elementsImport1months published, 2025-11 to 2025-11
7303 00 90Tubes, pipes and hollow profiles, of cast iron (excl. products of a kind used in pressure systems)Import1months published, 2016-10 to 2016-10
7306 19 00Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron)Export1months published, 2024-07 to 2024-07
7307 99 10Threaded tube or pipe fittings, of iron or steel (excl. cast iron or stainless steel products, flanges, elbows, bends and sleeves)Import1months published, 2016-06 to 2016-06
7326 90 96Sintered articles of iron or steel, n.e.s.Import1months published, 2018-04 to 2018-04
months published, 2016-07 to 2022-09
4009 12 00Tubes, pipes and hoses, of vulcanised rubber (excl. hard rubber), not reinforced or otherwise combined with other materials, with fittingsImport1months published, 2025-03 to 2025-03
4009 42 00Tubes, pipes and hoses, of vulcanised rubber (excl. hard rubber), reinforced or otherwise combined with materials other than metal or textile materials, with fittingsImport1months published, 2023-01 to 2023-01
months published, 2025-08 to 2026-07
6806 90 00Mixtures and articles of heat-insulating, sound-insulating or sound absorbing mineral materials (excl. slag-wool, rock-wool and similar mineral wools, exfoliated vermiculite, expanded clays, foamed slag and similar expanded mineral materials, articles of light concrete, asbestos-cement, cellulose fibre-cement or the like, mixtures and other articles of or based on asbestos, and ceramic products)Export1months published, 2020-04 to 2020-04
6815 99 00Articles of stone or of other mineral substances, n.e.s.Import1months published, 2024-10 to 2024-10
2
months published, 2017-11 to 2018-04
72Chapter-level link, no HMRC descriptionImport1months published, 2016-11 to 2016-11
7223 00 99Wire of stainless steel, in coils, containing by weight < 2,5% nickel (excl. such products containing 13% to 25% chromium and 3,5% to 6% aluminium, and bars and rods)Import1months published, 2018-07 to 2018-07
months published, 2016-05 to 2017-05
8307 10 00Flexible tubing of iron or steel, with or without fittingsImport1months published, 2025-01 to 2025-01
8310 00 00Sign-plates, nameplates, address-plates and similar plates, numbers, letters and other symbols, of base metal, incl. traffic signs (excl. those of heading 9405, type and the like, and signal boards, signal discs and signal arms for traffic of heading 8608)Import1months published, 2018-08 to 2018-08
months published, 2024-11 to 2024-11
7616 99 90Articles of aluminium, uncast, n.e.s.Import1months published, 2017-05 to 2017-05
1
months published, 2026-02 to 2026-02
8209 00 20Inserts, indexable, for tools, unmounted, of sintered metal carbide or cermetsImport1months published, 2017-10 to 2017-10
months published, 2024-05 to 2024-05
months published, 2025-03 to 2026-04
1
months published, 2024-06 to 2024-06
months published, 2020-09 to 2020-09
months published, 2023-11 to 2023-11
2
months published, 2018-11 to 2023-03
months published, 2016-06 to 2016-06
1
months published, 2018-06 to 2018-06
ESI PROCESS UK LTD · Tradaro
On the same codes
Traders published against the most of the same codes. A shared code is a shared commodity, not a relationship between them.
UK traderHMRC trader directoryref 68267