A filled cell is a month with at least one published link in the loaded scope. A gap is a month with no published link, not a month without trade.
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
Published in 127 months between 2016-01 and 2026-07. Each published month is listed with its commodity code count in the table above.
at least one published link
no published link in this month
outside the loaded window
swap_horizPublished as both an importer and an exporter, against 213 commodity codes across 29 tariff chapters.
event_availablePublished in every one of the 127 months from January 2016 to July 2026, without a gap.
scatter_plotSpread across 29 tariff chapters, none of them holding half the loaded codes.
south_westThe chapter 70 codes are import only.
What it trades
Grouped by tariff chapter, most published codes first. Descriptions are HMRC’s own, verbatim. This list is bounded: codes outside the loaded coverage are not listed.
inventory_2Chapter 84Published 2016-01 to 2026-0741of 200 loaded codes21%
8484 10 00Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metalImportExport127months published, 2016-01 to 2026-07
8409 91 00Parts suitable for use solely or principally with spark-ignition internal combustion piston engine, n.e.s.ImportExport110months published, 2016-06 to 2026-07
8409 99 00Parts suitable for use solely or principally with compression-ignition internal combustion piston engine "diesel or semi-diesel engine", n.e.s.ImportExport54months published, 2016-02 to 2026-07
8484 90 00Sets or assortments of gaskets and similar joints, dissimilar in composition, put up in pouches, envelopes or similar packingsImportExport29months published, 2016-02 to 2026-05
Show the 41 sampled codes, of 213 on the recordShow fewer codesexpand_moreexpand_less
8414 90 00Parts of: air or vacuum pumps, air or other gas compressors, fans and ventilating or recycling hoods incorporating a fan, and gas-tight biological safety cabinets, n.e.s.Export6months published, 2016-01 to 2020-05
inventory_2Chapter 72Published 2016-06 to 2026-0729of 200 loaded codes14%
7220 20 81Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of <= 0,35 mm and containing by weight >= 2,5% nickelImportExport
inventory_2Chapter 73Published 2016-05 to 2026-0719of 200 loaded codes10%
7318 15 62Hexagonal-socket head screws and bolts, of stainless steel "whether or not with their nuts and washers" (excl. wood screws, self-tapping screws and screws and bolts for fixing railway track construction material)ImportExport
inventory_2Chapter 85Published 2016-01 to 2025-1119of 200 loaded codes10%
8517 62 00Machines for the reception, conversion and transmission or regeneration of voice, images or other data, incl. switching and routing apparatus (excl. telephone sets, telephones for cellular networks or for other wireless networks)Import
inventory_2Chapter 76Published 2018-06 to 2026-0715of 200 loaded codes8%
7616 99 90Articles of aluminium, uncast, n.e.s.ImportExport
inventory_2Chapter 39Published 2016-01 to 2026-0412of 200 loaded codes6%
3917 40 00Fittings, e.g. joints, elbows, flanges, of plastics, for tubes, pipes and hosesImportExport
inventory_2Chapter 87Published 2016-01 to 2026-0712of 200 loaded codes6%
8708 92 20Silencers "mufflers" and exhaust pipes, and parts thereof, for the industrial assembly of: pedestrian-controlled tractors, motor cars and vehicles principally designed for the transport of persons, vehicles for the transport of goods with compression-ignition internal combustion piston engine "diesel or semi-diesel engine" <= 2500 cm or with spark-ignition internal piston engine <= 2800 cm , specExport
inventory_2Chapter 40Published 2016-01 to 2026-038of 200 loaded codes4%
4016 93 00Gaskets, washers and other seals, of vulcanised rubber (excl. hard rubber and those of cellular rubber)ImportExport
inventory_2Chapter 68Published 2016-06 to 2026-077of 200 loaded codes4%
6815 99 00Articles of stone or of other mineral substances, n.e.s.ImportExport
inventory_2Chapter 35Published 2016-02 to 2025-085of 200 loaded codes3%
3506 91 90Adhesives based on polymers of headings 3901 to 3913 or on rubber (excl. put up for retail sale with a net weight of <= 1 kg, and those used mainly for the manufacture of flat panel displays or touch-sensitive screen panels)Import
inventory_2Chapter 48Published 2018-08 to 2026-064of 200 loaded codes2%
4823 90 85Paper, paperboard, cellulose wadding and webs of cellulose fibres, in strips or rolls of a width <= 36 cm, in rectangular or square sheets, of which no side > 36 cm in the unfolded state, or cut to shape other than rectangular or square, and articles of paper pulp, paper, cellulose wadding or webs of cellulose fibres, n.e.s.ImportExport
inventory_2Chapter 82Published 2016-01 to 2026-014of 200 loaded codes2%
8207 30 10Interchangeable tools for pressing, stamping or punching, for working metalImportExport
inventory_2Chapter 45Published 2022-06 to 2026-063of 200 loaded codes2%
4504 10 91Tiles of any shape, blocks, plates, sheets and strip, solid cylinders, incl. discs, of agglomerated cork, with a binding substance (excl. corks and stoppers)Import
inventory_2Chapter 70Published 2022-02 to 2026-063of 200 loaded codes2%
7019 90 00Glass fibres and articles thereof, n.e.s.Import34
inventory_2Chapter 74Published 2023-10 to 2026-063of 200 loaded codes2%
7410 11 00Refined copper foil, not backed, of a thickness of <= 0,15 mm (excl. stamping foils of heading 3212, metal yarns and metallised yarns and foil made up as christmas tree decorating material)Import
inventory_2Chapter 32Published 2022-05 to 2026-032of 200 loaded codes1%
3208 90 91Paints and varnishes, incl. enamels and lacquers, based on synthetic polymers, dispersed or dissolved in a non-aqueous medium (excl. those based on polyesters and acrylic or vinyl polymers)Import
inventory_2Chapter 90Published 2023-01 to 2025-112of 200 loaded codes1%
9031 80 20Instruments, appliances and machines for measuring or checking geometrical quantities, n.e.s. in Ch 90Import5
inventory_2Chapter 25Published 2025-02 to 2025-021of 200 loaded codes1%
inventory_2Chapter 29Published 2024-04 to 2024-041of 200 loaded codes1%
2931 90 00Separate chemically defined organo-inorganic compounds (excl. organo-sulphur, mercury, tetramethyl lead, tetraethyl lead and tributyltin compounds, and organo-phosphorous derivatives)Import
inventory_2Chapter 38Published 2025-10 to 2025-101of 200 loaded codes1%
3801 10 00Artificial graphite (excl. retort graphite, retort carbon and goods of artificial graphite, incl. refractory materials based on artificial graphite)Import
inventory_2Chapter 42Published 2016-02 to 2016-021of 200 loaded codes1%
4205 00 11Conveyor or transmission belts or belting, of leather or composition leatherExport1
inventory_2Chapter 49Published 2016-05 to 2018-011of 200 loaded codes1%
inventory_2Chapter 59Published 2022-02 to 2022-021of 200 loaded codes1%
5910 00 00Transmission or conveyor belts or belting, of textile material, whether or not impregnated, coated, covered or laminated with plastics, or reinforced with metal or other material (excl. those of a thickness of < 3 mm and of indeterminate length or cut to length only, and those impregnated, coated, covered or laminated with rubber or made of yarn or cord impregnated or coated with rubber)Import
inventory_2Chapter 61Published 2024-06 to 2025-011of 200 loaded codes1%
6110 11 90Women's or girls' jerseys, pullovers, cardigans, waistcoats and similar articles, of wool, knitted or crocheted (excl. jerseys and pullovers containing >= 50% by weight of wool and weighing >= 600 g/article, and wadded waistcoats)Import
inventory_2Chapter 62Published 2026-01 to 2026-011of 200 loaded codes1%
6201 40 10Men's or boys' overcoats, car-coats, capes, cloaks, anoraks, incl. ski jackets, wind-cheaters, wind-jackets and similar articles, of man-made fibres, of a weight per garment of <= 1 kg (excl. knitted or crocheted, suits, ensembles, jackets, blazers and trousers)Import
inventory_2Chapter 63Published 2019-05 to 2019-051of 200 loaded codes1%
6307 10 10Floorcloths, dishcloths, dusters and similar cleaning cloths, knitted or crochetedExport1
inventory_2Chapter 66Published 2020-03 to 2020-031of 200 loaded codes1%
6601 10 00Garden or similar umbrellas (excl. beach tents)Export1
inventory_2Chapter 69Published 2024-01 to 2024-011of 200 loaded codes1%
6909 12 00Ceramic articles having a hardness equivalent to >= 9 on the Mohs scale, for chemical or other technical uses (excl. of porcelain or china, refractory ceramic goods, electrical devices, insulators and other electrical insulating fittings)Export
inventory_2Chapter 81Published 2023-10 to 2023-101of 200 loaded codes1%
8481 10 05Pressure-reducing valves combined with filters or lubricatorsExport5months published, 2017-05 to 2024-02
8484 20 00Mechanical sealsImportExport5months published, 2016-04 to 2025-08
8431 49 80Parts of machinery of heading 8426, 8429 and 8430, n.e.s.Export3months published, 2021-08 to 2022-06
8466 94 00Parts and accessories for machine tools for working metal without removing material, n.e.s.ImportExport3months published, 2023-05 to 2025-09
8477 90 80Parts of machinery for working rubber or plastics or for the manufacture of products from these materials of subheading 8477.10.00 to 8477.80.99, n.e.s. (excl. parts of machines for the manufacture of semiconductor devices or of electronic integrated circuits, and of cast iron or cast steel)Export3months published, 2023-02 to 2023-10
8479 90 70Parts of machines and mechanical appliances having individual functions, n.e.s. (excl. of cast iron or cast steel)ImportExport3months published, 2022-06 to 2024-02
8409 10 00Parts suitable for use solely or principally with internal combustion piston engine for aircraft, n.e.s.Export2months published, 2019-03 to 2022-02
8413 81 00Pumps for liquids, power-driven (excl. those of subheading 8413.11 and 8413.19, fuel, lubricating or cooling medium pumps for internal combustion piston engine, concrete pumps, general reciprocating or rotary positive displacement pumps and centrifugal pumps of all kinds)Export2months published, 2022-06 to 2022-07
8466 93 50Parts and accessories for water-jet cutting machines, n.e.s.Import2months published, 2022-07 to 2026-05
8474 90 90Parts of machinery of heading 8474 (excl. of cast iron or cast steel)Import2months published, 2023-09 to 2024-02
8477 90 10Parts of machinery for working rubber or plastics or for the manufacture of products from these materials of subheading 8477.10.00 to 8477.80.99, n.e.s., of cast iron or cast steel (excl. parts of machines for the manufacture of semiconductor devices or of electronic integrated circuits)Export2months published, 2023-04 to 2023-05
8481 20 10Valves for the control of oleohydraulic power transmissionImportExport2months published, 2018-07 to 2025-11
8483 60 80Clutches and shaft couplings, incl. universal joints (excl. of cast iron or cast steel)Import2months published, 2022-02 to 2025-03
8406 90 90Parts of steam turbines and other vapour turbines, n.e.s. (excl. stator blades, rotors and their blades)Export1months published, 2018-10 to 2018-10
8412 21 80Hydraulic power engines and motors, linear acting "cylinders" (excl. hydraulic systems)Import1months published, 2018-09 to 2018-09
8413 91 00Parts of pumps for liquids, n.e.s.Import1months published, 2018-01 to 2018-01
8414 30 20Compressors for refrigerating equipment, of a power <= 0,4 kWExport1months published, 2022-11 to 2022-11
8419 50 20Heat exchange units made of fluoropolymers and with inlet and outlet tube bores with inside diameters measuring <=3 cmExport1months published, 2018-05 to 2018-05
8421 29 80Machinery and apparatus for filtering or purifying liquids (excl. such machinery and apparatus for water and other beverages, oil or petrol filters for internal combustion engines, artificial kidneys, and those made of fluoropolymers with filter or purifier membrane thickness <= 140 ?m)Import1months published, 2022-02 to 2022-02
8421 39 25Machinery and apparatus for filtering or purifying air (excl. intake air filters for internal combustion engines, and those with stainless steel housing and with inlet and outlet tube bores with inside diameters <= 1,3 cm)Import1months published, 2024-02 to 2024-02
8430 10 00Pile-drivers and pile-extractors (excl. those mounted on railway wagons, motor vehicle chassis or lorries)Export1months published, 2016-01 to 2016-01
8431 39 00Parts of machinery of heading 8428, n.e.s.Import1months published, 2024-07 to 2024-07
8462 29 10Seemingly empty code since all numerically controlled machines are captured in preceding subheadingsImport1months published, 2016-11 to 2016-11
8471 41 00Data-processing machines, automatic, comprising in the same housing at least a central processing unit, and one input unit and one output unit, whether or not combined (excl. portable weighing <= 10 kg and excl. those presented in the form of systems and peripheral units)Import1months published, 2025-11 to 2025-11
8471 50 00Processing units for automatic data-processing machines, whether or not containing in the same housing one or two of the following types of unit: storage units, input units, output units (excl. those of heading 8471.41 or 8471.49 and excl. peripheral units)Import1months published, 2022-03 to 2022-03
8471 70 50Hard disk storage drives for automatic data-processing machines, neither optical nor magneto-optical (excl. central storage units)Import1months published, 2026-01 to 2026-01
8474 80 90Machinery for agglomerating, shaping or moulding solid mineral fuels, unhardened cements, plastering materials and other mineral products in powder or paste form, and machines for forming foundry moulds of sand (excl. for ceramic paste, for the casting or pressing of glass, and machines for additive manufacturing)Import1months published, 2023-09 to 2023-09
8477 10 00Injection-moulding machines for working rubber or plasticsExport1months published, 2023-02 to 2023-02
8479 89 97Machines, apparatus and mechanical appliances, n.e.s.Import1months published, 2024-06 to 2024-06
8479 90 20Parts of machines and mechanical appliances having individual functions, of cast iron or cast steel, n.e.s.Import1months published, 2025-03 to 2025-03
8481 10 99Pressure-reducing valves of base metal (not combined with filters or lubricators)Export1months published, 2025-05 to 2025-05
8481 80 99Appliances for pipes, boiler shells, tanks, vats or the like (excl. pressure-reducing valves, valves for the control of pneumatic power transmission, check "non-return" valves, safety or relief valves, taps, cocks and valves for sinks, baths and similar fixtures, central heating radiator valves, valves for pneumatic tyres and inner-tubes, process control valves, globe valves, gate valves, ball andExport1months published, 2021-10 to 2021-10
8481 90 00Parts of valves and similar articles for pipes, boiler shells, tanks, vats or the like, n.e.s.Import1months published, 2022-12 to 2022-12
8483 40 90Gears and gearing, for machinery (excl. ball or roller screws and gears and gearing in general, and toothed wheels, chain sprockets and other transmission elements presented separately)Import1months published, 2022-02 to 2022-02
8487 90 90Machinery parts of chapter 84, not intended for a specific purpose, n.e.s.Export1months published, 2016-03 to 2016-03
62
months published, 2016-06 to 2026-07
7212 40 80Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", painted, varnished or plastic coated (excl. tinplate, not further worked than varnished, and products plated or coated with chromium oxides or with chromium and chromium oxides, varnished)ImportExport55months published, 2021-09 to 2026-07
7220 20 41Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 0,35 mm but < 3 mm, and containing by weight >= 2,5% nickelImportExport49months published, 2022-01 to 2026-07
72Chapter-level link, no HMRC descriptionImportExport48months published, 2021-04 to 2026-06
Show the 29 sampled codes, of 213 on the recordShow fewer codesexpand_moreexpand_less
7210 70 10Tinplate of a width of >= 600 mm and of a thickness of < 0,5 mm, tinned [coated with a layer of metal containing, by weight, >= 97% of tin], not further worked than varnished, and flat products plated or coated with chromium oxides or with chromium and chromium oxides, of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", varnishedImport45months published, 2022-06 to 2026-07
7210 69 00Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", plated or coated with aluminium (excl. products plated or coated with aluminium-zinc alloys)Import37months published, 2022-02 to 2026-07
7212 50 90Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad (excl. products plated or coated with tin or zinc, copper, with chromium oxides or with chromium and chromium oxides, chromium, nickel or aluminium, painted or varnished, and plastic-coated)Import29months published, 2022-01 to 2026-07
7219 35 10Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm, containing by weight >= 2,5% nickelImport21months published, 2022-01 to 2026-07
7212 50 69Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", plated or coated with aluminium (excl. products plated or coated with aluminium-zinc alloys)Import14months published, 2022-02 to 2026-07
7220 20 89Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of <= 0,35 mm and containing by weight < 2,5% nickelImport11months published, 2018-07 to 2026-03
7226 99 70Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc, and products of high-speed steel or silicon-electrical steel)Import11months published, 2022-02 to 2026-07
7210 90 80Flat-rolled products of iron or non-alloy steel, hot-rolled or cold-rolled "cold-reduced", of a width of >= 600 mm, plated or coated (excl. plated or coated with thin, lead "incl. terne-plate", zinc, aluminium, chromium, chromium oxides, plastics, platinum, painted or varnished, clad and tinned and printed)ImportExport6months published, 2023-03 to 2025-11
7220 20 21Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm and containing by weight >= 2,5% nickelImport5months published, 2022-09 to 2025-10
7220 20 49Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 0,35 mm but < 3 mm, and containing by weight < 2,5% nickelImport5months published, 2023-09 to 2026-03
7210 30 00Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", electrolytically plated or coated with zincImportExport3months published, 2022-07 to 2023-05
7210 49 00Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", not corrugated, plated or coated with zinc (excl. electrolytically plated or coated with zinc)Import2months published, 2022-12 to 2023-12
7212 40 20Tinplate of a width of < 600 mm and of a thickness of < 0,5 mm, tinned [coated with a layer of metal containing, by weight, >= 97% of tin], not further worked than varnished, and flat products plated or coated with chromium oxides or with chromium and chromium oxides, of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", varnishedImport2months published, 2025-03 to 2025-10
7212 60 00Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", cladImport2months published, 2025-01 to 2026-04
7202 29 90Ferro-silicon, containing by weight <= 55% silicon (excl. that containing by weight >= 4% but <= 10% of magnesium)Import1months published, 2018-11 to 2018-11
7208 25 00Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm, pickled, without patterns in reliefImport1months published, 2025-02 to 2025-02
7208 26 00Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 3 mm but < 4,75 mm, pickled, without patterns in reliefImport1months published, 2025-03 to 2025-03
7212 10 90Flat-rolled products of iron or non-alloy steel, hot-rolled or cold-rolled "cold-reduced", of a width of < 600 mm, tinned (excl. tinplate, not further worked than surface-treated)Import1months published, 2018-10 to 2018-10
7212 20 00Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", electrolytically plated or coated with zincImportExport1months published, 2025-01 to 2025-01
7212 30 00Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", tinned (excl. electrolytically plated or coated with zinc)Import1months published, 2022-12 to 2022-12
7212 50 30Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", plated or coated with chromium or nickelImport1months published, 2025-04 to 2025-04
7219 13 10Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm but <= 4,75 mm, containing by weight >= 2,5 nickelImport1months published, 2026-02 to 2026-02
7220 12 00Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mmImport1months published, 2025-08 to 2025-08
7220 90 80Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, non-perforatedExport1months published, 2020-04 to 2020-04
7225 99 00Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon-electrical steel)Import1months published, 2023-02 to 2023-02
40
months published, 2018-06 to 2026-06
7318 23 00Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses)ImportExport26months published, 2022-01 to 2026-07
7318 15 88Hexagon screws and bolts, of iron or steel other than stainless "whether or not with their nuts and washers", with a tensile strength of => 800 MPa (excl. with socket head, wood screws, self-tapping screws and screws and bolts for fixing railway track construction material)Import24months published, 2022-03 to 2026-05
7326 90 98Articles of iron or steel, n.e.s.ImportExport21months published, 2018-04 to 2026-07
Show the 19 sampled codes, of 213 on the recordShow fewer codesexpand_moreexpand_less
7318 29 00Non-threaded articles, of iron or steelImportExport18months published, 2017-01 to 2026-03
7318 16 40Blind rivet nuts of iron or steel other than stainlessImport17months published, 2017-06 to 2026-07
7318 16 92Nuts of iron or steel other than stainless, with an inside diameter <= 12 mm (excl. blind rivet nuts and self-locking nuts)Import11months published, 2022-05 to 2025-08
7307 99 10Threaded tube or pipe fittings, of iron or steel (excl. cast iron or stainless steel products, flanges, elbows, bends and sleeves)Import6months published, 2023-05 to 2025-06
7326 90 94Articles of iron or steel, closed-die forged, n.e.s.Import5months published, 2025-02 to 2026-06
7308 90 98Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet)Import4months published, 2022-02 to 2022-09
7318 15 95Screws and bolts, of iron or steel "whether or not with their nuts and washers", with heads (excl. with slotted, cross-recessed or hexagonal head; wood screws, self-tapping screws and screws and bolts for fixing railway track construction material, screw hooks and screw rings)Import3months published, 2022-01 to 2026-02
7318 22 00Washers of iron or steel (excl. spring washers and other lock washers)Export2months published, 2021-12 to 2025-06
7326 20 00Articles of iron or steel wire, n.e.s.ImportExport2months published, 2021-02 to 2025-05
7318 15 42Screws and bolts, of iron or steel other than stainless "whether or not with their nuts and washers", without heads, with a tensile strength of < 800 MPa (excl. screws and bolts for fixing railway track construction material)Import1months published, 2025-08 to 2025-08
7318 19 00Threaded articles, of iron or steel, n.e.s.Import1months published, 2016-05 to 2016-05
7320 90 90Springs and leaves for springs, of iron or steel (excl. discs springs, flat spiral springs, helical springs, leaf-springs and leaves therefor, clock and watch springs, springs for sticks and handles of umbrellas or parasols, and shock absorbers and torque rod or torsion bar springs of Section 17)Import1months published, 2023-07 to 2023-07
7323 99 00Table, kitchen or other household articles, and parts thereof, of iron other than cast iron or steel other than stainless (excl. enamelled articles; cans, boxes and similar containers of heading 7310; waste baskets; shovels and other articles of the nature of a work implement; cutlery, spoons, ladles etc. of heading 8211 to 8215; ornamental articles; sanitary ware)Export1months published, 2023-11 to 2023-11
7326 90 40Pallets and similar platforms for handling goods, of iron or steelImport1months published, 2022-06 to 2022-06
7326 90 92Articles of iron or steel, open-die forged, n.e.s.Import1months published, 2022-10 to 2022-10
3
months published, 2023-06 to 2025-11
8538 90 99Parts suitable for use solely or principally with the apparatus of heading 8535, 8536 or 8537, n.e.s. (excl. electronic assemblies, and boards, panels, consoles, desks, cabinets and other bases for the goods of heading 8537, not equipped with their apparatus, and for wafer probers)Import3months published, 2022-12 to 2025-11
8547 20 00Insulating fittings for electrical purposes, of plasticsExport3months published, 2023-05 to 2025-03
8504 40 85Inverters having power handling capacity <= 7,5 kVAImport2months published, 2023-03 to 2025-01
Show the 19 sampled codes, of 213 on the recordShow fewer codesexpand_moreexpand_less
8504 40 95Static converters (excl. accumulator chargers, rectifiers, and inverters)ImportExport2months published, 2025-08 to 2025-09
8507 90 80Parts of electric accumulators (excl. separators)Import2months published, 2022-08 to 2022-09
8536 49 00Relays for a voltage > 60 V but <= 1.000 VImportExport2months published, 2025-04 to 2025-05
8546 10 00Electrical insulators of glass (excl. insulating fittings)Export2months published, 2023-04 to 2024-01
8501 53 81AC motors, multi-phase, of an output of > 75 kW but <= 375 kW (excl. traction motors)Export1months published, 2025-05 to 2025-05
8504 40 86Inverters having power handling capacity > 7,5 kVAImport1months published, 2023-03 to 2023-03
8505 90 20Electromagnets; electromagnetic or permanent magnet chucks, clamps and similar holding devicesExport1months published, 2016-01 to 2016-01
8506 90 00Parts of primary cells and primary batteries, n.e.s.Import1months published, 2023-08 to 2023-08
8514 11 00Hot isostatic pressesExport1months published, 2023-03 to 2023-03
8515 90 00No description publishedImport1months published, 2016-03 to 2016-03
8516 10 80Electric water heaters and immersion heaters (excl. instantaneous water heaters)Export1months published, 2023-11 to 2023-11
8516 80 80Electric heating resistors (excl. electric heating resistors assembled with an insulated former of agglomerated carbon or graphite)Export1months published, 2024-02 to 2024-02
8523 51 90Solid-state, non-volatile data storage devices [flash memory cards or flash electronic storage cards], recordedImport1months published, 2023-01 to 2023-01
8533 40 10Electrical variable resistors, incl. rheostats and potentiometers, for a power handling capacity <= 20 W (excl. wirewound variable resistors and heating resistors)Import1months published, 2023-03 to 2023-03
8537 10 91Programmable memory controllers (excl. numerical control panels with built-in automatic data-processing machines)Import1months published, 2025-11 to 2025-11
40
months published, 2021-01 to 2026-07
7616 99 10Articles of aluminium, cast, n.e.s.Import25months published, 2022-01 to 2024-07
7606 12 92Plates, sheets and strip, of aluminium alloys, of a thickness of > 0,2 mm but < 3 mm, square or rectangular (excl. painted, varnished or coated with plastics, expanded plates, sheets and strip, beverage can body stock, end stock and tab stock)Import16months published, 2022-07 to 2026-06
7606 91 00Plates, sheets and strip, of non-alloy aluminium, of a thickness of > 0,2 mm (other than square or rectangular)ImportExport14months published, 2018-06 to 2026-05
Show the 15 sampled codes, of 213 on the recordShow fewer codesexpand_moreexpand_less
7606 11 91Plates, sheets and strip, of non-alloy aluminium, of a thickness of > 0,2 mm but < 3 mm, square or rectangular (excl. such products painted, varnished or coated with plastics, and expanded plates, sheets and strip)ImportExport12months published, 2019-10 to 2026-05
7606 92 00Plates, sheets and strip, of aluminium alloys, of a thickness of > 0,2 mm (other than square or rectangular)Import7months published, 2021-10 to 2024-07
7606 11 30Aluminium Composite Panel, of non-alloy aluminium, of a thickness of > 0,2 mmImport5months published, 2024-09 to 2026-03
7606 12 99Plates, sheets and strip, of aluminium alloys, of a thickness of >= 6 mm, square or rectangular (excl. such products painted, varnished or coated with plastics)ImportExport5months published, 2021-06 to 2022-12
7616 10 00Nails, tacks, staples, screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles, of aluminium (excl. staples in strips, plugs, bungs and the like, threaded)Import3months published, 2021-03 to 2023-05
7606 11 99Plates, sheets and strip, of non-alloy aluminium, of a thickness of >= 6 mm, square or rectangular (excl. such products painted, varnished or coated with plastics)Import2months published, 2025-08 to 2025-12
7606 12 50Plates, sheets and strip, of aluminium alloys, of a thickness of > 0,2 mm, square or rectangular, painted, varnished or coated with plastics (excl. beverage can body stock, end stock and tab stock, and Aluminium Composite Panel)Import2months published, 2025-10 to 2026-03
7607 19 90Aluminium foil, not backed, rolled and further worked, of a thickness (excl. any backing) from 0,021 mm to 0,2 mm (excl. stamping foils of heading 3212, and foil made up as christmas tree decorating material)Import2months published, 2022-11 to 2025-08
7606 11 93Plates, sheets and strip, of non-alloy aluminium, of a thickness of >= 3 mm but < 6 mm, square or rectangular (excl. such products painted, varnished or coated with plastics)Import1months published, 2025-08 to 2025-08
7607 11 90Aluminium foil, not backed, rolled but not further worked, of a thickness of >= 0,021 mm but <= 0,2 mm (excl. stamping foils of heading 3212, and foil made up as christmas tree decorating material)Export1months published, 2024-09 to 2024-09
7607 19 10Aluminium foil, not backed, rolled and further worked, of a thickness of < 0,021 mm (excl. stamping foils of heading 3212, and foil made up as christmas tree decorating material)Import1months published, 2023-05 to 2023-05
11
months published, 2016-08 to 2026-04
3926 90 97Articles of plastics and articles of other materials of heading 3901 to 3914, n.e.s.ImportExport11months published, 2019-09 to 2024-03
3910 00 00Silicones in primary formsImportExport2months published, 2019-10 to 2022-09
3921 90 90Plates, sheets, film, foil and strip, of plastics, reinforced, laminated, supported or similarly combined with other materials, unworked or merely surface-worked or merely cut into squares or rectangles (excl. of cellular plastic, addition polymerization products, condensation polymerization products and rearrangement polymerization products; self-adhesive products and floor, wall and ceiling coveImport2months published, 2023-12 to 2026-01
Show the 12 sampled codes, of 213 on the recordShow fewer codesexpand_moreexpand_less
3923 10 90Boxes, cases, crates and similar articles for the conveyance or packaging of goods, of plastics (excl. special ones for semiconductor wafers, masks or reticles)ImportExport2months published, 2022-06 to 2023-01
3904 69 20Fluoroelastomers FKM, in primary formsImport1months published, 2023-09 to 2023-09
3919 90 80Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls > 20 cm wide (excl. floor, wall and ceiling coverings of heading 3918, and circular polishing pads used in semiconductor wafer production))Import1months published, 2023-02 to 2023-02
3920 20 29Plates, sheets, film, foil and strip, of non-cellular polymers of propylene, not reinforced, laminated, supported or similarly combined with other materials, not further worked or only surface-worked and not cut to shapes other than rectangular "incl. square" of a thickness of <= 0,10 mm, not biaxially orientedImport1months published, 2018-04 to 2018-04
3921 19 00Plates, sheets, film, foil and strip, of cellular plastic, unworked or merely surface-worked or merely cut into squares or rectangles (excl.those of polymers of styrene, vinyl chloride, polyurethanes and regenerated cellulose, self-adhesive products, floor, wall and ceiling coverings of heading 3918 and sterile surgical or dental adhesion barriers of subheading 3006.10.30)Import1months published, 2023-12 to 2023-12
3923 10 10Boxes, cases, crates and similar articles, of plastic, specially shaped or fitted for the conveyance or packing of semiconductor wafers, masks, or reticlesExport1months published, 2022-02 to 2022-02
3923 90 00Articles for the conveyance or packaging of goods, of plastics (excl. boxes, cases, crates and similar articles; sacks and bags, incl. cones; carboys, bottles, flasks and similar articles; spools, spindles, bobbins and similar supports; stoppers, lids, caps and other closures)Import1months published, 2025-07 to 2025-07
3926 90 50Perforated buckets and similar articles used to filter water at the entrance to drains, of plasticsExport1months published, 2016-01 to 2016-01
64
months published, 2016-01 to 2024-02
8708 99 10Parts and accessories for the industrial assembly of: pedestrian-controlled tractors, motor cars and vehicles principally designed for the transport of persons, vehicles for the transport of goods with compression-ignition internal combustion piston engine "diesel or semi-diesel engine" <= 2500 cm or with spark-ignition internal piston engine <= 2800 cm , special purpose motor vehicles of headingImportExport55months published, 2016-01 to 2026-07
8708 99 97Parts and accessories for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. of closed-die forged steel)ImportExport44months published, 2016-01 to 2026-07
8708 29 10Parts and accessories for the industrial assembly of bodies of: pedestrian-controlled tractors, motor cars and vehicles principally designed for the transport of persons, vehicles for the transport of goods with compression-ignition internal combustion piston engine "diesel or semi-diesel engine" <= 2500 cm or spark-ignition internal piston engine <= 2800 cm ; special purpose motor vehicles of NoExport31months published, 2021-01 to 2024-02
Show the 12 sampled codes, of 213 on the recordShow fewer codesexpand_moreexpand_less
8708 29 90Parts and accessories for the industrial assembly of bodies of: tractors, motor vehicles for the transport of >= 10 persons, motor cars and vehicles principally designed for the transport of persons, motor vehicles for the transport of goods, special purpose motor vehicles (excl. bumpers and parts thereof, safety seat belts, front windscreens "windshields", rear windows and other windows and partsImportExport25months published, 2017-05 to 2026-06
8708 40 99Parts for gear boxes for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.40.20 and of closed-die forged steel)Export18months published, 2021-10 to 2024-05
8708 50 35Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles (excl. those for the industrial assembly of certainExport18months published, 2016-01 to 2017-12
8708 30 91Parts for disc brakes, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.30.10)Export8months published, 2016-01 to 2019-02
8708 10 10Bumpers and parts thereof, for the industrial assembly of motor cars and other motor vehicles principally designed for the transport of persons, vehicles for the transport of goods with compression-ignition internal combustion piston engine "diesel or semi-diesel engine" of a cylinder capacity <= 2.500 cm or with spark-ignition internal piston engine of a cylinder capacity <= 2.800 cm and speciaExport5months published, 2016-03 to 2025-09
8708 10 90Bumpers and parts thereof for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.10.10)Export2months published, 2016-02 to 2016-04
8708 21 10Safety seat belts for the industrial assembly of : motor cars and other motor vehicles principally designed for the transport of persons, vehicles for the transport of goods, with compression-ignition internal combustion piston engine "diesel or semi-diesel" of a cylinder capacity <= 2.500 cm or with spark-ignition internal piston engine of a cylinder capacity <= 2.800 cm and special purpose motExport2months published, 2016-03 to 2022-03
8708 99 93Parts and accessories of closed-die forged steel, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s.Export2months published, 2019-05 to 2023-11
32
months published, 2016-01 to 2026-03
4016 99 97Articles of vulcanised rubber, n.e.s. (excl. hard rubber and those of cellular rubber)ImportExport7months published, 2016-05 to 2024-12
4016 10 00Articles of cellular rubber, n.e.s.ImportExport3months published, 2016-11 to 2023-12
4005 91 00Compounded rubber, unvulcanised, in the form of plates, sheets or strip (excl. rubber compounded with carbon black or silica, and mixtures of natural rubber, balata, gutta-percha, guayule, chicle and similar natural gums containing synthetic rubber or factice derived from oils)Import1months published, 2016-08 to 2016-08
Show the 8 sampled codes, of 213 on the recordShow fewer codesexpand_moreexpand_less
4008 11 00Plates, sheets and strip of cellular rubberImport1months published, 2025-06 to 2025-06
4009 22 00Tubes, pipes and hoses, of vulcanised rubber (excl. hard rubber), reinforced or otherwise combined only with metal, with fittingsImport1months published, 2025-11 to 2025-11
4016 99 52Rubber-to-metal bonded parts of vulcanised rubber (excl. hard rubber), of a type intended exclusively or mainly for use in motor vehicles of heading 8701 to 8705 (excl. those of cellular rubber)Import1months published, 2025-01 to 2025-01
4016 99 57Articles of vulcanised rubber (excl. hard rubber), of a type intended exclusively or mainly for use in motor vehicles of heading 8701 to 8705, n.e.s. (excl. those of cellular rubber, and rubber-to-metal bonded parts)Import1months published, 2023-11 to 2023-11
84
months published, 2017-03 to 2026-07
6806 90 00Mixtures and articles of heat-insulating, sound-insulating or sound absorbing mineral materials (excl. slag-wool, rock-wool and similar mineral wools, exfoliated vermiculite, expanded clays, foamed slag and similar expanded mineral materials, articles of light concrete, asbestos-cement, cellulose fibre-cement or the like, mixtures and other articles of or based on asbestos, and ceramic products)Import39months published, 2022-01 to 2026-07
6803 00 90Worked slate and articles of slate or of agglomerated slate (excl. slate granules, chippings and powder, mosaic cubes and the like, slate pencils, ready-to-use slates or boards with writing or drawing surfaces, and roofing and wall slates)Export15months published, 2016-06 to 2021-10
6814 10 00Plates, sheets and strips of agglomerated or reconstituted mica, whether or not on a support of paper, paperboard or other materials, in rolls or merely cut into square or rectangular shapesImport3months published, 2023-04 to 2026-05
Show the 7 sampled codes, of 213 on the recordShow fewer codesexpand_moreexpand_less
6814 90 00Worked mica and articles of mica (excl. electrical insulators, insulating fittings, resistors and capacitors, protective goggles of mica and their glasses, mica in the form of Christmas tree decorations, and plates, sheets and strips of agglomerated or reconstituted mica, whether or not on supports)Export2months published, 2023-04 to 2024-01
68Chapter-level link, no HMRC descriptionExport1months published, 2019-02 to 2019-02
6815 19 00Articles of graphite or carbon, for non-electrical purposes (excl. carbon fibres and articles of carbon fibres)Import1months published, 2026-01 to 2026-01
11
months published, 2021-05 to 2024-04
3506 91 10Optically clear free-film adhesives and optically clear curable liquid adhesives of a kind used solely or principally for the manufacture of flat panel displays or touch-sensitive screen panels, based on polymers of headings 3901 to 3913 or on rubberImport2months published, 2021-01 to 2021-03
3506 10 00Products suitable for use as glues or adhesives put up for retail sale as glues or adhesives, with a net weight of <= 1 kgExport1months published, 2025-08 to 2025-08
3506 91 00Adhesives based on polymers of heading 3901 to 3913 or on rubber (excl. products suitable for use as glues or adhesives put up for retail sale as glues or adhesives, with a net weight of <= 1 kg)Import1months published, 2016-02 to 2016-02
Show the 5 sampled codes, of 213 on the recordShow fewer codesexpand_moreexpand_less
3506 99 00Glues, prepared, and other prepared adhesives, n.e.s.Import1months published, 2021-12 to 2021-12
14
months published, 2018-08 to 2025-08
4819 10 00Cartons, boxes and cases, of corrugated paper or paperboardImport3months published, 2023-08 to 2026-05
4811 41 20Self-adhesive paper and paperboard, surface-coloured, surface-decorated or printed, in strips, rolls or sheets of a width of <= 10 cm, coated with unvulcanised natural or synthetic rubberImport1months published, 2026-06 to 2026-06
4821 10 10Self-adhesive paper or paperboard labels of all kinds, printedExport1months published, 2025-01 to 2025-01
14
months published, 2022-02 to 2026-01
8205 70 00Vices, clamps and the like (excl. accessories for and parts of machine tools or water-jet cutting machines)Export3months published, 2016-01 to 2016-04
8201 10 00Spades and shovels, with working parts of base metalExport1months published, 2017-08 to 2017-08
8205 90 90Sets of articles of two or more subheadings of heading 8205Export1months published, 2016-01 to 2016-01
18
months published, 2023-06 to 2026-06
4504 90 80Agglomerated cork, with or without a binding substance, and articles of agglomerated cork (excl. footwear and parts thereof, insoles, whether or not removable; headgear and parts thereof; plugs and dividers for shotgun cartridges; toys, games and sports equipment and parts thereof; blocks, plates, sheets or strips; tiles of any shape; solid cylinders, incl. discs; corks and stoppers)Export3months published, 2022-06 to 2022-09
4504 10 99Tiles of any shape, blocks, plates, sheets and strip, solid cylinders, incl. discs, of agglomerated cork, without binding substance (excl. corks and stoppers)Import1months published, 2025-06 to 2025-06
months published, 2022-07 to 2026-06
7019 69 90Mechanically bonded fabrics of glass fibres (excl. closed fabrics of rovings, and woven, stitched or needled fabrics)Import4months published, 2022-02 to 2022-06
7008 00 81Insulating units consisting of two panels of glass sealed around the edges by an airtight joint and separated by a layer of air, other gases or a vacuum (excl. coloured throughout the mass, opacified, flashed or having an absorbent or reflective layer)Import1months published, 2026-05 to 2026-05
2
months published, 2023-10 to 2024-09
7415 21 00Washers, "incl. spring washers and spring lock washers", of copperExport2months published, 2026-01 to 2026-06
7405 00 00Master alloys of copper (excl. phosphorus-copper compounds "copper phosphide" containing by weight > 15% phosphorus)Export1months published, 2024-02 to 2024-02
15
months published, 2022-05 to 2026-03
3208 90 19Solutions of products of headings 3901 to 3913 in volatile organic solvents, containing > 50% solvent by weight (excl. polyesters, acrylic or vinyl polymers and collodion, and polyurethane of 2,2'-"tert-butylimino"diethanol and 4,4'-methylenedicyclohexyl diisocyanate and copolymer of p-cresol and divinylbenzene, both in the form of a solution in N,N-dimethylacetamide, containing by weight >= 48% oImport1months published, 2022-10 to 2022-10
months published, 2023-01 to 2025-11
9032 89 00Regulating or controlling instruments and apparatus (excl. hydraulic or pneumatic, manostats, thermostats, and taps, cocks and valves of heading 8481)ImportExport2months published, 2025-08 to 2025-09
months published, 2025-02 to 2025-02
1
months published, 2024-04 to 2024-04
1
months published, 2025-10 to 2025-10
months published, 2016-02 to 2016-02
months published, 2016-05 to 2018-01
1
months published, 2022-02 to 2022-02
2
months published, 2024-06 to 2025-01
1
months published, 2026-01 to 2026-01
months published, 2019-05 to 2019-05
months published, 2020-03 to 2020-03
1
months published, 2024-01 to 2024-01
months published, 2023-10 to 2023-10
ELRING KLINGER (GREAT · Tradaro
On the same codes
Traders published against the most of the same codes. A shared code is a shared commodity, not a relationship between them.
UK traderHMRC trader directoryref 3710