A filled cell is a month with at least one published link in the loaded scope. A gap is a month with no published link, not a month without trade.
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
Published in 108 months between 2016-01 and 2026-07. Each published month is listed with its commodity code count in the table above.
at least one published link
no published link in this month
outside the loaded window
swap_horizPublished as both an importer and an exporter, against 195 commodity codes across 18 tariff chapters.
event_busyPublished in 108 of the 124 months from January 2016 to April 2026. A missing month is one with no published link, not a month without trade.
scatter_plotSpread across 18 tariff chapters, none of them holding half the loaded codes.
north_eastThe chapter 73 codes are export only.
What it trades
Grouped by tariff chapter, most published codes first. Descriptions are HMRC’s own, verbatim. This list is bounded: codes outside the loaded coverage are not listed.
inventory_2Chapter 84Published 2016-01 to 2025-0190of 195 loaded codes46%
8409 99 00Parts suitable for use solely or principally with compression-ignition internal combustion piston engine "diesel or semi-diesel engine", n.e.s.ImportExport100months published, 2016-01 to 2025-01
8413 91 00Parts of pumps for liquids, n.e.s.ImportExport51months published, 2016-01 to 2024-07
8414 80 11Turbocompressors, single-stage (excl. compressors for refrigerating equipment and air compressors mounted on a wheeled chassis for towing)ImportExport45months published, 2016-11 to 2025-01
8483 30 80Plain shaft bearings for machineryImportExport38months published, 2016-01 to 2025-01
Show the 90 sampled codesShow fewer codesexpand_moreexpand_less
8409 91 00Parts suitable for use solely or principally with spark-ignition internal combustion piston engine, n.e.s.ImportExport31months published, 2016-10 to 2024-03
8484 90 00Sets or assortments of gaskets and similar joints, dissimilar in composition, put up in pouches, envelopes or similar packings
inventory_2Chapter 85Published 2016-01 to 2024-0828of 195 loaded codes14%
8511 80 00Electrical ignition or starting equipment, incl. cut-outs, of a kind used for spark-ignition or compression-ignition internal combustion engines (excl. generators, starter motors, distributors, ignition coils, ignition magnetos, magnetic flywheels and sparking plugs)Export
inventory_2Chapter 87Published 2016-01 to 2024-0725of 195 loaded codes13%
8709 90 00Parts of self-propelled works trucks, not fitted with lifting or handling equipment, of the type used in factories, warehouses, dock areas or airports for short distance transport of goods, incl. tractors for railways station platforms, n.e.s.ImportExport
inventory_2Chapter 73Published 2016-01 to 2024-0615of 195 loaded codes8%
7326 90 98Articles of iron or steel, n.e.s.Export3
inventory_2Chapter 40Published 2016-05 to 2026-0410of 195 loaded codes5%
4016 93 00Gaskets, washers and other seals, of vulcanised rubber (excl. hard rubber and those of cellular rubber)Export12
inventory_2Chapter 90Published 2017-05 to 2023-097of 195 loaded codes4%
9029 10 00Revolution counters, production counters, taximeters, milometers, pedometers and the like (excl. gas, liquid and electricity meters)Export
inventory_2Chapter 38Published 2021-02 to 2024-053of 195 loaded codes2%
3824 99 45Anti-scaling and similar compoundsExport10
inventory_2Chapter 32Published 2021-05 to 2024-062of 195 loaded codes1%
3214 10 10Glaziers' putty, grafting putty, resin cements, caulking compounds and other masticsImportExport
inventory_2Chapter 39Published 2018-03 to 2020-102of 195 loaded codes1%
3926 10 00Office or school supplies, of plastics, n.e.s.Export1
inventory_2Chapter 48Published 2016-08 to 2023-112of 195 loaded codes1%
4812 00 00Filter blocks, slabs and plates, of paper pulpExport1
inventory_2Chapter 69Published 2016-05 to 2018-052of 195 loaded codes1%
6903 10 00Retorts, crucibles, mufflers, nozzles, plugs, supports, cupels, tubes, pipes, sheaths, rods, slide gates and other refractory ceramic goods, containing by weight > 50% free carbon (excl. refractory bricks, blocks, tiles and similar refractory ceramic constructional goods)Export
inventory_2Chapter 82Published 2016-08 to 2019-092of 195 loaded codes1%
8205 10 00Hand-operated drilling, threading or tapping hand toolsExport1
inventory_2Chapter 88Published 2016-03 to 2024-052of 195 loaded codes1%
8803 30 00Parts of aeroplanes or helicopters, n.e.s. (excl. those for gliders)Export2
inventory_2Chapter 35Published 2024-06 to 2024-061of 195 loaded codes1%
3506 10 00Products suitable for use as glues or adhesives put up for retail sale as glues or adhesives, with a net weight of <= 1 kgExport
inventory_2Chapter 41Published 2023-12 to 2023-121of 195 loaded codes1%
inventory_2Chapter 49Published 2018-01 to 2018-011of 195 loaded codes1%
4910 00 00Calendars of any kinds, printed, incl. calendars blocksImport1
inventory_2Chapter 59Published 2024-05 to 2024-071of 195 loaded codes1%
5911 90 99Textile products and articles, for technical purposes, specified in Note 7 to chapter 59, n.e.s.Export2
inventory_2Chapter 74Published 2020-07 to 2020-071of 195 loaded codes1%
7418 20 00Sanitary ware and parts thereof, of copper (excl. cans, boxes and similar containers of heading 7419, and fittings)Export
ImportExport
31months published, 2016-03 to 2024-06
8409 10 00Parts suitable for use solely or principally with internal combustion piston engine for aircraft, n.e.s.Export25months published, 2016-01 to 2020-12
8481 80 59Process control valves (excl. temperature regulators, pressure-reducing valves, valves for the control of oleohydraulic or pneumatic power transmission, check valves and safety or relief valves, taps, cocks and valves for sinks, washbasins, bidets, water cisterns, baths and similar fixtures and central heating radiator valves)ImportExport17months published, 2019-03 to 2024-05
8413 30 80Fuel, lubricating or cooling medium pumps for internal combustion piston engine (excl. injection pumps)ImportExport16months published, 2017-07 to 2025-01
8421 23 00Oil or petrol-filters for internal combustion enginesImportExport14months published, 2016-03 to 2024-07
8484 10 00Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metalImportExport14months published, 2016-08 to 2024-06
8413 30 20Injection pumps for internal combustion piston engineImportExport13months published, 2016-04 to 2025-01
8487 90 90Machinery parts of chapter 84, not intended for a specific purpose, n.e.s.ImportExport12months published, 2019-02 to 2024-06
8408 90 27Compression-ignition internal combustion piston engine "diesel or semi-diesel engine", used (excl. engines for rail traction or marine propulsion and engines for motor vehicles of chapter 87)Export8months published, 2016-10 to 2018-12
8414 90 00Parts of: air or vacuum pumps, air or other gas compressors, fans and ventilating or recycling hoods incorporating a fan, and gas-tight biological safety cabinets, n.e.s.ImportExport8months published, 2017-02 to 2024-11
8483 60 80Clutches and shaft couplings, incl. universal joints (excl. of cast iron or cast steel)ImportExport8months published, 2017-11 to 2024-04
8413 11 00Pumps fitted or designed to be fitted with a measuring device, for dispensing fuel or lubricants, of the type used in filling stations or in garagesExport7months published, 2016-01 to 2020-04
8414 59 25Axial fans (excl. table, floor, wall, window, ceiling or roof fans, with a self-contained electric motor of an output <= 125 W, and fans for cooling IT equipment of 8414 59 15)ImportExport7months published, 2021-03 to 2024-08
8411 11 00Turbojets of a thrust <= 25 kNExport6months published, 2018-01 to 2019-02
8424 49 90Agricultural or horticultural sprayers (excl. portable, and those designed to be mounted on or drawn by a tractor)Export6months published, 2017-07 to 2018-09
8481 10 05Pressure-reducing valves combined with filters or lubricatorsExport6months published, 2016-07 to 2020-08
8481 80 51Temperature regulators (excl. thermostatic valves for central heating radiators)ImportExport6months published, 2022-01 to 2024-09
8481 90 00Parts of valves and similar articles for pipes, boiler shells, tanks, vats or the like, n.e.s.ImportExport6months published, 2017-10 to 2022-04
8483 10 50Articulated shaftsExport5months published, 2016-11 to 2023-02
8412 90 80Parts of non-electrical engines and motors, n.e.s.Export4months published, 2016-02 to 2016-05
8414 80 19Turbocompressors, multi-stage (excl. compressors for refrigerating equipment and air compressors mounted on a wheeled chassis for towing)Export4months published, 2018-01 to 2024-08
8412 90 40Parts of hydraulic power engines and motors, n.e.s.Export3months published, 2017-07 to 2020-01
8413 92 00Parts of liquid elevators, n.e.s.Export3months published, 2018-05 to 2023-07
8421 11 00Centrifugal cream separatorsExport3months published, 2018-12 to 2020-01
8424 90 80Parts of fire extinguishers, spray guns and similar appliances, steam or sand blasting machines and similar jet projecting machines and machinery and apparatus for projecting, dispersing or spraying liquids or powders, n.e.s.Export3months published, 2019-08 to 2021-05
8432 90 00Parts of agricultural, horticultural or forestry machinery for soil preparation or cultivation or of lawn or sports-ground rollers, n.e.s.Export3months published, 2018-02 to 2022-08
8438 90 00Parts of machinery for the industrial preparation or manufacture of food or drink, n.e.s.Export3months published, 2023-12 to 2024-07
8479 90 70Parts of machines and mechanical appliances having individual functions, n.e.s. (excl. of cast iron or cast steel)Export3months published, 2021-06 to 2024-06
8483 10 21Cranks and crank shafts, of cast iron or cast steelExport3months published, 2018-11 to 2022-03
8411 99 00Parts of gas turbines, n.e.s.Export2months published, 2019-01 to 2019-08
8412 29 89Hydraulic power engines and motors (excl. linear acting [cylinders], hydraulic systems, hydraulic fluid power motors, hydraulic turbines and water wheels of heading 8410 and steam turbines)Export2months published, 2018-08 to 2019-07
8413 19 00Pumps for liquids, fitted or designed to be fitted with a measuring device (excl. pumps for dispensing fuel or lubricants, of the type used in filling stations or in garages)Export2months published, 2021-10 to 2022-03
8413 50 20Reciprocating positive displacement hydraulic units, with pumpsExport2months published, 2017-03 to 2017-09
8413 81 00Pumps for liquids, power-driven (excl. those of subheading 8413.11 and 8413.19, fuel, lubricating or cooling medium pumps for internal combustion piston engine, concrete pumps, general reciprocating or rotary positive displacement pumps and centrifugal pumps of all kinds)Export2months published, 2021-12 to 2022-08
8414 10 20Vacuum pumps for use in semiconductor production, of a kind used only secondarily for itExport2months published, 2016-01 to 2016-05
8421 99 90Parts of machinery and apparatus for filtering or purifying liquids or gases, n.e.s.ImportExport2months published, 2021-12 to 2023-03
8479 10 00Machinery for public works, building or the like, n.e.s.Export2months published, 2016-01 to 2018-02
8479 90 15Parts of automated electronic component placement machines of a kind used solely or principally for the manufacture of printed circuit assembliesExport2months published, 2017-10 to 2019-01
8481 20 10Valves for the control of oleohydraulic power transmissionExport2months published, 2018-07 to 2020-01
8482 20 00Tapered roller bearings, incl. cone and tapered roller assembliesExport2months published, 2016-03 to 2018-06
8483 10 95Main shafts or driving shafts, counter shafts, cam shafts, eccentric shafts and other transmission shafts (excl. cranks, crank shafts and articulated shafts)Export2months published, 2016-08 to 2018-06
8483 30 32Bearing housings for machinery, for ball or roller bearingsImportExport2months published, 2020-10 to 2021-10
8483 40 90Gears and gearing, for machinery (excl. ball or roller screws and gears and gearing in general, and toothed wheels, chain sprockets and other transmission elements presented separately)ImportExport2months published, 2019-11 to 2022-12
8483 90 81Toothed wheels, chain sprockets and other transmission elements presented separately and parts of transmission shafts and cranks; bearing housings and plain shaft bearings; gears and gearing, ball or roller screws, gear boxes and other speed changers, flywheels and pulleys, clutches and shaft couplings, of cast iron or cast steel, n.e.s.Export2months published, 2022-02 to 2022-07
8484 20 00Mechanical sealsExport2months published, 2018-08 to 2022-07
8487 90 40Parts of machinery of chapter 84, not intended for a specific purpose, of cast iron, n.e.s.Export2months published, 2022-02 to 2022-11
8406 90 90Parts of steam turbines and other vapour turbines, n.e.s. (excl. stator blades, rotors and their blades)Export1months published, 2024-06 to 2024-06
8407 33 20Spark-ignition reciprocating piston engine, of a kind used for vehicles of chapter 87, of a cylinder capacity > 250 cm but <= 500 cmExport1months published, 2018-10 to 2018-10
8408 20 10Compression-ignition internal combustion piston engine "diesel or semi-diesel engine" for the industrial assembly of : pedestrian-controlled tractors of subheading 8701.10, motor vehicles of heading 8703, motor vehicles of heading 8704 with engines of a cylinder capacity < 2.500 cm and motor vehicles of heading 8705Export1months published, 2020-07 to 2020-07
8410 90 00Parts of hydraulic turbines and water wheels incl. regulatorsExport1months published, 2017-07 to 2017-07
8411 81 00Gas turbines of a power <= 5.000 kW (excl. turbojets and turbopropellers)Export1months published, 2018-04 to 2018-04
8411 91 00Parts of turbojets or turbopropellers, n.e.s.Export1months published, 2016-09 to 2016-09
8412 10 00Reaction engines other than turbojetsExport1months published, 2019-05 to 2019-05
8414 10 15Vacuum pumps of a kind used for the manufacture of semiconductors or solely or principally used for the manufacture of flat panel displaysExport1months published, 2018-10 to 2018-10
8414 30 89Compressors for refrigerating equipment, of a power > 0,4 kW (excl. hermetic or semi-hermetic compressors)ImportExport1months published, 2023-10 to 2023-10
8414 40 90Air compressors mounted on a wheeled chassis for towing, giving a flow per minute > 2 mExport1months published, 2022-06 to 2022-06
8414 59 15Fans of a kind used solely or principally for cooling microprocessors, telecommunication apparatus, automatic data processing machines or units of automatic data processing machinesExport1months published, 2020-10 to 2020-10
8414 80 80Air pumps and ventilating or recycling hoods incorporating a fan, whether or not fitted with filters, with a maximum horizontal side > 120 cm (excl. vacuum pumps, hand- or foot-operated air pumps, compressors and gas-tight biological safety cabinets)Import1months published, 2024-03 to 2024-03
8418 99 90Parts of refrigerating or freezing equipment and heat pumps, n.e.s.Import1months published, 2019-01 to 2019-01
8419 11 00Instantaneous gas water heaters (excl. boilers or water heaters for central heating)Export1months published, 2016-06 to 2016-06
8419 50 80Heat-exchange units (excl. those used with boilers and those made of fluoropolymers with inlet and outlet tube bores with inside diameters measuring <=3 cm)Export1months published, 2024-06 to 2024-06
8421 99 00Parts of machinery and apparatus for filtering or purifying liquids or gases, n.e.s.Export1months published, 2016-04 to 2016-04
8424 10 00Fire extinguishers, whether or not chargedExport1months published, 2021-04 to 2021-04
8439 99 00Parts of machinery for making or finishing paper or paperboard, n.e.s.Export1months published, 2021-10 to 2021-10
8453 90 00Parts of machinery for preparing, tanning or working hides, skins or leather or for making or repairing footwear or other articles of hides, skins or leather, n.e.s.Export1months published, 2021-08 to 2021-08
8466 94 00Parts and accessories for machine tools for working metal without removing material, n.e.s.Export1months published, 2017-07 to 2017-07
8477 90 80Parts of machinery for working rubber or plastics or for the manufacture of products from these materials of subheading 8477.10.00 to 8477.80.99, n.e.s. (excl. parts of machines for the manufacture of semiconductor devices or of electronic integrated circuits, and of cast iron or cast steel)Import1months published, 2024-04 to 2024-04
8479 90 80Parts of machines and mechanical appliances having individual functions, n.e.s. (excl. of cast iron or cast steel)Export1months published, 2016-11 to 2016-11
8481 10 19Pressure-reducing valves of cast iron or of steel (not combined with filters or lubricators)Export1months published, 2016-09 to 2016-09
8481 10 99Pressure-reducing valves of base metal (not combined with filters or lubricators)Export1months published, 2018-03 to 2018-03
8481 20 90Valves for the control of pneumatic power transmissionImport1months published, 2024-03 to 2024-03
8481 40 90Safety or relief valves (excl. those of cast iron or steel)Export1months published, 2019-06 to 2019-06
8481 80 11Mixing valves for sinks, washbasins, bidets, water cisterns, baths and similar fixturesExport1months published, 2018-08 to 2018-08
8481 80 40Valves for pneumatic tyres and inner-tubesExport1months published, 2019-12 to 2019-12
8481 80 87Diaphragm valves for pipes, boiler shells, tanks, vats or the likeExport1months published, 2017-03 to 2017-03
8482 50 00Cylindrical roller bearings, incl. cage and roller assemblies (excl. bearings of 8482 10 to 8482 40)Export1months published, 2020-11 to 2020-11
8482 99 00Parts of ball or roller bearings (excl. balls, needles and rollers), n.e.s.Export1months published, 2022-06 to 2022-06
8483 10 29Cranks and crank shafts (excl. of open-die forged steel or cast iron or cast steel)Export1months published, 2021-07 to 2021-07
8483 20 00Bearing housings, incorporating ball or roller bearings, for machineryImport1months published, 2023-12 to 2023-12
8483 40 59Speed changers, incl. torque converters, for machinery (excl. gear boxes)Export1months published, 2022-05 to 2022-05
8483 50 80Flywheels and pulleys, incl. pulley blocks (excl. of cast iron or cast steel)Import1months published, 2022-02 to 2022-02
8483 90 20Parts of bearing housings, n.e.s.Export1months published, 2019-12 to 2019-12
8483 90 89Toothed wheels, chain sprockets and other transmission elements presented separately and parts of transmission shafts and cranks; bearing housings and plain shaft bearings; gears and gearing, ball or roller screws, gear boxes and other speed changers, flywheels and pulleys, clutches and shaft couplings, n.e.s. (excl. of cast iron or cast steel)Export1months published, 2018-03 to 2018-03
8487 10 10Ships' or boats' propellers and blades therefor, of bronzeExport1months published, 2024-01 to 2024-01
6
months published, 2018-07 to 2024-04
8536 10 10Fuses for a current <= 10 A, for a voltage <= 1.000 VExport6months published, 2016-10 to 2018-08
8503 00 10Non-magnetic retaining rings for electric motors and electric generating setsExport4months published, 2016-12 to 2019-06
8505 90 29Electromagnets; electromagnetic or permanent magnet chucks, clamps and similar holding devices (excl. electromagnets used for magnetic resonance imaging apparatus)Export4months published, 2022-04 to 2023-11
Show the 28 sampled codesShow fewer codesexpand_moreexpand_less
8511 40 00Starter motors and dual purpose starter-generators of a kind used for spark-ignition or compression-ignition internal combustion enginesExport4months published, 2016-06 to 2023-11
8501 10 10Synchronous motors of an output <= 18 WExport3months published, 2016-01 to 2018-11
8501 10 99DC motors of an output <= 37,5 WImportExport3months published, 2022-01 to 2022-03
8511 10 00Sparking plugs of a kind used for spark-ignition or compression-ignition internal combustion enginesImportExport3months published, 2017-08 to 2022-01
8511 90 00Parts of electrical ignition or starting equipment, generators, etc. of heading 8511, n.e.s.ImportExport3months published, 2019-02 to 2020-09
8501 31 00DC motors of an output > 37,5 W but <= 750 W and DC generators of an output <= 750 W (excl. photovoltaic generators)Export2months published, 2017-10 to 2018-05
8536 49 00Relays for a voltage > 60 V but <= 1.000 VExport2months published, 2023-07 to 2024-06
8536 50 11Push-button switches for a voltage of <= 60 VExport2months published, 2018-05 to 2018-06
8536 50 19Switches for a voltage of <= 60 V (excl. relays, push-button switches and rotary switches)Export2months published, 2020-07 to 2023-08
8544 30 00Ignition wiring sets and other wiring sets for vehicles, aircraft or shipsImportExport2months published, 2021-04 to 2022-09
8501 61 20AC generators "alternators", of an output <= 7,5 kVA (excl. photovoltaic generators)Export1months published, 2017-03 to 2017-03
8503 00 91Parts suitable for use solely or principally with electric motors and generators, electric generating sets and rotary converters, n.e.s., of cast iron or cast steelExport1months published, 2017-01 to 2017-01
8503 00 99Parts suitable for use solely or principally with electric motors and generators, electric generating sets and rotary converters, n.e.s. (excl. non-magnetic retaining rings and of cast iron or cast steel)Export1months published, 2024-08 to 2024-08
8505 90 90Parts of permanent magnets, electromagnets, electromagnetic clutches, couplings, brakes and lifting heads, electromagnetic or permanent magnet holding devices, n.e.s.Export1months published, 2018-04 to 2018-04
8511 30 00Distributors and ignition coils of a kind used for spark-ignition or compression-ignition internal combustion enginesExport1months published, 2021-08 to 2021-08
8515 90 20Parts of wave soldering machines used in manufacturing printed circuit assembliesExport1months published, 2021-02 to 2021-02
8516 90 00Parts of electric water heaters, immersion heaters, space-heating apparatus and soil-heating apparatus, hairdressing apparatus and hand dryers, electro-thermic appliances of a kind used for domestic purposes and electric heating resistors, n.e.s.Export1months published, 2018-09 to 2018-09
8535 10 00Fuses for a voltage > 1.000 VExport1months published, 2017-06 to 2017-06
8536 61 10Edison lamp holders, electricExport1months published, 2017-09 to 2017-09
8536 90 10Connections and contact elements, for wire and cables, for a voltage of <= 1.000 V (excl. plugs, sockets and prefabricated elements)Export1months published, 2017-12 to 2017-12
8536 90 95Electrical apparatus for making connections to or in electrical circuits, for a voltage <= 1.000 V (excl. fuses, circuit breakers and other apparatus for protecting electrical circuits, relays and other switches, lamp holders, plugs and sockets, prefabricated elements for electrical circuits, connections and contact elements for wire and cables, and car battery clamps)Import1months published, 2022-10 to 2022-10
8538 90 11Electronic assemblies for wafer probers of subheading 8536.90.20Export1months published, 2017-12 to 2017-12
8543 70 90Electrical machines and apparatus, having individual functions, n.e.s. in chap. 85Export1months published, 2020-07 to 2020-07
8544 49 93Conductors, electric, for a voltage <= 80 V, insulated, not fitted with connectors, n.e.s. (excl. winding wire, coaxial conductors, wiring sets for vehicles, aircraft or ships, and wire and cables with individual conductor wires of a diameter > 0,51 mm)Export1months published, 2022-07 to 2022-07
90
months published, 2016-01 to 2024-07
8708 99 97Parts and accessories for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. of closed-die forged steel)ImportExport60months published, 2016-01 to 2024-03
8708 10 10Bumpers and parts thereof, for the industrial assembly of motor cars and other motor vehicles principally designed for the transport of persons, vehicles for the transport of goods with compression-ignition internal combustion piston engine "diesel or semi-diesel engine" of a cylinder capacity <= 2.500 cm or with spark-ignition internal piston engine of a cylinder capacity <= 2.800 cm and speciaExport26months published, 2016-03 to 2023-05
8708 29 90Parts and accessories for the industrial assembly of bodies of: tractors, motor vehicles for the transport of >= 10 persons, motor cars and vehicles principally designed for the transport of persons, motor vehicles for the transport of goods, special purpose motor vehicles (excl. bumpers and parts thereof, safety seat belts, front windscreens "windshields", rear windows and other windows and partsImportExport18months published, 2016-02 to 2023-10
Show the 25 sampled codesShow fewer codesexpand_moreexpand_less
8708 99 10Parts and accessories for the industrial assembly of: pedestrian-controlled tractors, motor cars and vehicles principally designed for the transport of persons, vehicles for the transport of goods with compression-ignition internal combustion piston engine "diesel or semi-diesel engine" <= 2500 cm or with spark-ignition internal piston engine <= 2800 cm , special purpose motor vehicles of headingExport13months published, 2016-04 to 2021-07
8708 10 90Bumpers and parts thereof for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.10.10)Export11months published, 2016-07 to 2021-08
8708 30 91Parts for disc brakes, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.30.10)ImportExport7months published, 2020-10 to 2024-04
8714 99 90Parts and accessories for bicycles, and parts thereof, n.e.s.Export4months published, 2016-03 to 2018-12
8708 40 99Parts for gear boxes for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.40.20 and of closed-die forged steel)ImportExport3months published, 2018-06 to 2024-04
8708 93 90Clutches and parts thereof, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.93.10)Import3months published, 2022-01 to 2023-11
8708 92 99Parts for silencers "mufflers" and exhaust pipes, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.92.20 and of closed-dExport2months published, 2018-10 to 2020-03
8708 93 10Clutches and parts thereof, for the industrial assembly of: pedestrian-controlled tractors, motor cars and vehicles principally designed for the transport of persons, vehicles for the transport of goods with compression-ignition internal combustion piston engine "diesel or semi-diesel engine" <= 2500 cm or with spark-ignition internal piston engine <= 2800 cm , special purpose motor vehicles of hExport2months published, 2021-12 to 2023-05
8701 91 90Tractors, of an engine power <= 18 kW (excl. those of heading 8709, pedestrian-controlled tractors, road tractors for semi-trailers, track-laying tractors and wheeled agricultural/forestry tractors)Export1months published, 2017-09 to 2017-09
8701 95 10Agricultural tractors and forestry tractors, wheeled, of an engine power > 130 kW (excl. pedestrian-controlled tractors)Export1months published, 2022-04 to 2022-04
8702 30 10Motor vehicles for the transport of >= 10 persons, incl. driver, with both spark-ignition internal combustion reciprocating piston engine and electric motor as motors for propulsion, of a cylinder capacity of > 2.800 cmExport1months published, 2022-03 to 2022-03
8708 21 10Safety seat belts for the industrial assembly of : motor cars and other motor vehicles principally designed for the transport of persons, vehicles for the transport of goods, with compression-ignition internal combustion piston engine "diesel or semi-diesel" of a cylinder capacity <= 2.500 cm or with spark-ignition internal piston engine of a cylinder capacity <= 2.800 cm and special purpose motExport1months published, 2016-06 to 2016-06
8708 30 99Brakes and servo-brakes and their parts, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.30.10 and for disc brakes)Import1months published, 2023-01 to 2023-01
8708 80 99Suspension systems and parts thereof, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.80.20, shock-absorbers, anti rollExport1months published, 2022-07 to 2022-07
8708 91 20Radiators and parts thereof, for the industrial assembly of: pedestrian-controlled tractors, motor cars and vehicles principally designed for the transport of persons, vehicles for the transport of goods with compression-ignition internal combustion piston engine "diesel or semi-diesel engine" of a cylinder capacity <= 2500 cm or with spark-ignition internal piston engine of a cylinder capacity <Export1months published, 2024-06 to 2024-06
8708 91 99Parts for radiators, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.91.20 and those of closed-die forged steel)Export1months published, 2019-03 to 2019-03
8708 92 35Silencers "mufflers" and exhaust pipes, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.92.20)Export1months published, 2020-07 to 2020-07
8708 95 10Safety airbags with inflator system and parts thereof, for the industrial assembly of: pedestrian-controlled tractors, motor cars and vehicles principally designed for the transport of persons, vehicles for the transport of goods with compression-ignition internal combustion piston engine "diesel or semi-diesel engine" <= 2500 cm or with spark-ignition internal piston engine <= 2800 cm , specialExport1months published, 2018-06 to 2018-06
8714 10 50Clutches and parts thereof, of motorcycles "incl. mopeds"Export1months published, 2018-06 to 2018-06
8714 10 90Parts and accessories of motorcycles, incl. mopeds, n.e.s. (excl. brakes, gear boxes, road wheels, silencers, exhaust pipes, clutches, and their parts)Export1months published, 2018-11 to 2018-11
8716 20 00Self-loading or self-unloading trailers and semi-trailers for agricultural purposesExport1months published, 2022-09 to 2022-09
months published, 2019-07 to 2024-06
7308 20 00Towers and lattice masts, of iron or steelExport1months published, 2022-06 to 2022-06
7316 00 00Anchors, grapnels and parts thereof, of iron or steelExport1months published, 2019-03 to 2019-03
7318 11 00Coach screws of iron or steelExport1months published, 2016-01 to 2016-01
Show the 15 sampled codesShow fewer codesexpand_moreexpand_less
7318 12 10Wood screws of stainless steel (excl. coach screws)Export1months published, 2017-06 to 2017-06
7318 13 00Screw hooks and screw rings, of iron or steelExport1months published, 2024-06 to 2024-06
7318 15 48Screws and bolts, of iron or steel other than stainless "whether or not with their nuts and washers", without heads, with a tensile strength of >= 800 MPa (excl. screws and bolts for fixing railway track construction material)Export1months published, 2024-06 to 2024-06
7318 15 68Hexagonal-socket head screws and bolts, of iron or steel other than stainless "whether or not with their nuts and washers" (excl. wood screws, self-tapping screws and screws and bolts for fixing railway track construction material)Export1months published, 2024-06 to 2024-06
7318 15 82Hexagon screws and bolts, of iron or steel other than stainless "whether or not with their nuts and washers", with a tensile strength of < 800 MPa (excl. with socket head, wood screws, self-tapping screws and screws and bolts for fixing railway track construction material)Export1months published, 2019-12 to 2019-12
7318 15 95Screws and bolts, of iron or steel "whether or not with their nuts and washers", with heads (excl. with slotted, cross-recessed or hexagonal head; wood screws, self-tapping screws and screws and bolts for fixing railway track construction material, screw hooks and screw rings)Export1months published, 2022-04 to 2022-04
7318 16 99Nuts of iron or steel other than stainless, with an inside diameter > 12 mm (excl. blind rivet nuts and self-locking nuts)Export1months published, 2018-10 to 2018-10
7318 22 00Washers of iron or steel (excl. spring washers and other lock washers)Export1months published, 2024-06 to 2024-06
7320 10 11Laminated leaf-springs and leaves therefor, of iron or steelExport1months published, 2021-09 to 2021-09
7320 20 85Coil tension springs, of iron or steelExport1months published, 2023-10 to 2023-10
7326 90 30Ladders and steps, of iron or steelExport1months published, 2023-10 to 2023-10
months published, 2016-05 to 2026-04
4010 39 00Transmission belts or belting, of vulcanised rubber (excl. endless transmission belts of trapezoidal cross-section "V-belts", V-ribbed, of an outside circumference > 60 cm but <= 240 cm and endless synchronous belts of an outside circumference > 60 cm but <= 198 cm)Export9months published, 2016-05 to 2023-09
4010 31 00Endless transmission belts of trapezoidal cross-section "V-belts", of vulcanised rubber, V-ribbed, of an outside circumference > 60 cm but <= 180 cmImportExport5months published, 2016-05 to 2023-02
4016 10 00Articles of cellular rubber, n.e.s.Export4months published, 2016-07 to 2018-07
Show the 10 sampled codesShow fewer codesexpand_moreexpand_less
4008 29 00Rods, tubes and profile shapes, of non-cellular rubberExport2months published, 2019-12 to 2024-06
4010 35 00Endless synchronous belts, of vulcanised rubber, of an outside circumference > 60 cm but <= 150 cmImportExport2months published, 2022-02 to 2023-10
4009 31 00Tubes, pipes and hoses, of vulcanised rubber (excl. hard rubber), reinforced or otherwise combined only with textile materials, without fittingsExport1months published, 2024-06 to 2024-06
4010 12 00Conveyor belts or belting, of vulcanised rubber, reinforced only with textile materialsExport1months published, 2020-06 to 2020-06
4013 20 00Inner tubes, of rubber, of a kind used for bicyclesExport1months published, 2020-07 to 2020-07
4016 99 97Articles of vulcanised rubber, n.e.s. (excl. hard rubber and those of cellular rubber)Export1months published, 2024-06 to 2024-06
3
months published, 2021-11 to 2022-12
9026 20 20Electronic instruments and apparatus for measuring or checking pressure of liquids or gases (excl. regulators)Export2months published, 2023-07 to 2023-08
9026 10 21Electronic flow meters for measuring or checking the flow or level of liquids (excl. meters and regulators)Export1months published, 2017-05 to 2017-05
9031 80 20Instruments, appliances and machines for measuring or checking geometrical quantities, n.e.s. in Ch 90Export1months published, 2023-09 to 2023-09
Show the 7 sampled codesShow fewer codesexpand_moreexpand_less
9031 80 80Non-optical instruments, appliances and machines for measuring or checking, n.e.s. in Ch 90Export1months published, 2021-03 to 2021-03
9032 89 00Regulating or controlling instruments and apparatus (excl. hydraulic or pneumatic, manostats, thermostats, and taps, cocks and valves of heading 8481)Export1months published, 2019-12 to 2019-12
9032 90 00Parts and accessories for regulating or controlling instruments and apparatus, n.e.s.Export1months published, 2022-07 to 2022-07
months published, 2021-10 to 2024-05
3811 19 00Anti-knock preparations for motor fuels (excl. those based on lead compounds)Export7months published, 2021-02 to 2023-04
3824 99 96Chemical products and preparations of the chemical or allied industries, incl. those consisting of mixtures of natural products, not predominantly composed of organic compounds, n.e.s.Export1months published, 2021-02 to 2021-02
13
months published, 2021-12 to 2024-06
3214 10 90Painter's fillingsExport1months published, 2021-05 to 2021-05
months published, 2018-03 to 2018-03
3926 30 00Fittings for furniture, coachwork and the like, of plastics (excl. building components for permanent mounting on parts of buildings)Export1months published, 2020-10 to 2020-10
months published, 2016-08 to 2016-08
4820 40 00Manifold business forms and interleaved carbon sets, of paper or paperboardExport1months published, 2023-11 to 2023-11
2
months published, 2016-05 to 2017-05
6903 20 10Retorts, crucibles, mufflers, nozzles, plugs, supports, cupels, tubes, pipes, sheaths, rods and other refractory ceramic goods, containing, by weight, < 45% of alumina and > 50% of silica (excl. refractory bricks, blocks, tiles and similar refractory ceramic constructional goods)Export1months published, 2018-05 to 2018-05
months published, 2019-09 to 2019-09
8207 50 30Interchangeable masonry drills, with working parts of materials other than diamond or agglomerated diamondExport1months published, 2016-08 to 2016-08
months published, 2016-03 to 2018-06
8807 10 00Propellers and rotors and parts thereof, for aircraft, n.e.s.Export1months published, 2024-05 to 2024-05
1
months published, 2024-06 to 2024-06
months published, 2023-12 to 2023-12
months published, 2018-01 to 2018-01
months published, 2024-05 to 2024-07
1
months published, 2020-07 to 2020-07
RINGBACK LTD · Tradaro
On the same codes
Traders published against the most of the same codes. A shared code is a shared commodity, not a relationship between them.
UK traderHMRC trader directoryref 62319