A filled cell is a month with at least one published link in the loaded scope. A gap is a month with no published link, not a month without trade.
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
Published in 94 months between 2016-01 and 2026-07. The months are listed with their commodity codes in the table above.
at least one published link
no published link in this month
outside the loaded window
swap_horizPublished as both an importer and an exporter, against 39 commodity codes across 5 tariff chapters.
event_busyPublished in 94 of the 127 months from January 2016 to July 2026. A missing month is one with no published link, not a month without trade.
scatter_plotSpread across 5 tariff chapters, none of them holding half the loaded codes.
scheduleThe chapter 90 codes only start in June 2020.
What it trades
Grouped by tariff chapter, most published codes first. Descriptions are HMRC’s own, verbatim. This list is bounded: codes outside the loaded coverage are not listed.
inventory_2Chapter 84Published 2016-02 to 2026-0717of 39 loaded codes44%
8409 91 00Parts suitable for use solely or principally with spark-ignition internal combustion piston engine, n.e.s.ImportExport39months published, 2016-04 to 2026-07
8409 99 00Parts suitable for use solely or principally with compression-ignition internal combustion piston engine "diesel or semi-diesel engine", n.e.s.ImportExport8months published, 2016-03 to 2022-06
8411 91 00Parts of turbojets or turbopropellers, n.e.s.Import8months published, 2023-08 to 2026-04
8481 20 90Valves for the control of pneumatic power transmissionImport7months published, 2020-08 to 2022-11
Show the 17 sampled codesShow fewer codesexpand_moreexpand_less
8414 90 00Parts of: air or vacuum pumps, air or other gas compressors, fans and ventilating or recycling hoods incorporating a fan, and gas-tight biological safety cabinets, n.e.s.Import4months published, 2022-02 to 2025-12
8412 90 80Parts of non-electrical engines and motors, n.e.s.Import
inventory_2Chapter 90Published 2020-06 to 2025-088of 39 loaded codes21%
9032 90 00Parts and accessories for regulating or controlling instruments and apparatus, n.e.s.ImportExport
inventory_2Chapter 85Published 2019-03 to 2026-057of 39 loaded codes18%
8537 10 91Programmable memory controllers (excl. numerical control panels with built-in automatic data-processing machines)ImportExport
inventory_2Chapter 87Published 2016-01 to 2026-035of 39 loaded codes13%
8708 99 97Parts and accessories for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. of closed-die forged steel)Import
inventory_2Chapter 73Published 2019-03 to 2023-082of 39 loaded codes5%
7304 90 00Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron)Export1
2months published, 2019-02 to 2020-10
8414 80 11Turbocompressors, single-stage (excl. compressors for refrigerating equipment and air compressors mounted on a wheeled chassis for towing)Import2months published, 2017-05 to 2017-06
8425 11 00Pulley tackle and hoists, powered by electric motor (other than skip hoists or hoists of a kind used for raising vehicles)Import2months published, 2021-09 to 2022-03
8481 90 00Parts of valves and similar articles for pipes, boiler shells, tanks, vats or the like, n.e.s.Import2months published, 2016-09 to 2017-12
8412 10 00Reaction engines other than turbojetsExport1months published, 2017-06 to 2017-06
8414 80 51Reciprocating displacement compressors, having a gauge pressure capacity > 15 bar, giving a flow/h <= 120 m (excl. compressors for refrigerating equipment and air compressors mounted on a wheeled chassis for towing)Import1months published, 2022-05 to 2022-05
8471 30 00Data-processing machines, automatic, portable, weighing <= 10 kg, consisting of at least a central processing unit, a keyboard and a display (excl. peripheral units)Export1months published, 2020-10 to 2020-10
8479 90 70Parts of machines and mechanical appliances having individual functions, n.e.s. (excl. of cast iron or cast steel)Import1months published, 2017-02 to 2017-02
8479 90 80Parts of machines and mechanical appliances having individual functions, n.e.s. (excl. of cast iron or cast steel)Import1months published, 2016-07 to 2016-07
8481 80 99Appliances for pipes, boiler shells, tanks, vats or the like (excl. pressure-reducing valves, valves for the control of pneumatic power transmission, check "non-return" valves, safety or relief valves, taps, cocks and valves for sinks, baths and similar fixtures, central heating radiator valves, valves for pneumatic tyres and inner-tubes, process control valves, globe valves, gate valves, ball andImport1months published, 2016-02 to 2016-02
8483 90 89Toothed wheels, chain sprockets and other transmission elements presented separately and parts of transmission shafts and cranks; bearing housings and plain shaft bearings; gears and gearing, ball or roller screws, gear boxes and other speed changers, flywheels and pulleys, clutches and shaft couplings, n.e.s. (excl. of cast iron or cast steel)Import1months published, 2016-02 to 2016-02
18
months published, 2022-04 to 2025-08
9026 10 21Electronic flow meters for measuring or checking the flow or level of liquids (excl. meters and regulators)Export3months published, 2022-09 to 2023-10
9026 90 00Parts and accessories for instruments and apparatus for measuring or checking the flow, level, pressure or other variables of liquids or gases, n.e.s.ImportExport3months published, 2023-02 to 2024-11
9032 10 20Electronic thermostatsExport2months published, 2020-06 to 2022-07
Show the 8 sampled codesShow fewer codesexpand_moreexpand_less
9026 20 20Electronic instruments and apparatus for measuring or checking pressure of liquids or gases (excl. regulators)Export1months published, 2022-09 to 2022-09
9031 10 00Machines for balancing mechanical partsExport1months published, 2020-10 to 2020-10
9031 90 00Parts and accessories for instruments, appliances and machines for measuring and checking, n.e.s.Export1months published, 2023-08 to 2023-08
9032 89 00Regulating or controlling instruments and apparatus (excl. hydraulic or pneumatic, manostats, thermostats, and taps, cocks and valves of heading 8481)Import1months published, 2023-04 to 2023-04
13
months published, 2019-03 to 2026-05
8537 20 99Boards, cabinets and similar combinations of apparatus for electric control or the distribution of electricity, for a voltage > 72,5 kVImportExport7months published, 2021-01 to 2024-07
8543 90 00Parts of electrical machines and apparatus, having individual functions, n.e.s. in chapter 85ImportExport2months published, 2022-04 to 2023-08
8537 10 10Numerical control panels with built-in automatic data-processing machinesExport1months published, 2022-07 to 2022-07
Show the 7 sampled codesShow fewer codesexpand_moreexpand_less
8537 10 98Boards, cabinets and similar combinations of apparatus for electric control or the distribution of electricity, for a voltage <= 1.000 V (excl. switching apparatus for line telephony or line telegraphy, numerical control panels with built-in automatic data-processing machines, programmable memory controllers and touch screens)Import1months published, 2026-01 to 2026-01
8537 20 91Boards, cabinets and similar combinations of apparatus for electric control or the distribution of electricity, for a voltage > 1.000 V but <= 72,5 kVImport1months published, 2022-08 to 2022-08
8540 11 00Cathode ray television picture tubes, incl. video monitor cathode ray tubes, colourExport1months published, 2020-07 to 2020-07
22
months published, 2016-01 to 2025-03
8708 99 10Parts and accessories for the industrial assembly of: pedestrian-controlled tractors, motor cars and vehicles principally designed for the transport of persons, vehicles for the transport of goods with compression-ignition internal combustion piston engine "diesel or semi-diesel engine" <= 2500 cm or with spark-ignition internal piston engine <= 2800 cm , special purpose motor vehicles of headingExport2months published, 2022-05 to 2024-01
8708 10 10Bumpers and parts thereof, for the industrial assembly of motor cars and other motor vehicles principally designed for the transport of persons, vehicles for the transport of goods with compression-ignition internal combustion piston engine "diesel or semi-diesel engine" of a cylinder capacity <= 2.500 cm or with spark-ignition internal piston engine of a cylinder capacity <= 2.800 cm and speciaExport1months published, 2023-05 to 2023-05
8708 50 20Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, and parts thereof, for the industrial assembly of: pedestrian-controlled tractors, motor cars and vehicles principally designed for the transport of persons, vehicles for the transport of goods with compression-ignition internal combustion piston engine "diesel or semi-diesel engine" <Export1months published, 2024-08 to 2024-08
Show the 5 sampled codesShow fewer codesexpand_moreexpand_less
8708 92 99Parts for silencers "mufflers" and exhaust pipes, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.92.20 and of closed-dImport1months published, 2026-03 to 2026-03
months published, 2023-08 to 2023-08
7326 90 98Articles of iron or steel, n.e.s.Import1months published, 2019-03 to 2019-03
BADGER 5 LTD · Tradaro
On the same codes
Traders published against the most of the same codes. A shared code is a shared commodity, not a relationship between them.
UK traderHMRC trader directoryref 63664