A filled cell is a month with at least one published link in the loaded scope. A gap is a month with no published link, not a month without trade.
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
Published in 127 months between 2016-01 and 2026-07. Each published month is listed with its commodity code count in the table above.
at least one published link
no published link in this month
outside the loaded window
swap_horizPublished as both an importer and an exporter, against 185 commodity codes across 18 tariff chapters.
event_availablePublished in every one of the 127 months from January 2016 to July 2026, without a gap.
scatter_plotSpread across 18 tariff chapters, none of them holding half the loaded codes.
south_westThe chapter 72 codes are import only.
What it trades
Grouped by tariff chapter, most published codes first. Descriptions are HMRC’s own, verbatim. This list is bounded: codes outside the loaded coverage are not listed.
inventory_2Chapter 84Published 2016-01 to 2026-0785of 185 loaded codes46%
8483 40 30Ball or roller screws, for machineryImportExport94months published, 2016-02 to 2026-07
8412 90 80Parts of non-electrical engines and motors, n.e.s.Import83months published, 2016-01 to 2025-12
8412 31 00Pneumatic power engines and motors, linear-acting, "cylinders"ImportExport82months published, 2017-03 to 2026-07
8431 39 00Parts of machinery of heading 8428, n.e.s.ImportExport81months published, 2016-03 to 2026-03
Show the 85 sampled codesShow fewer codesexpand_moreexpand_less
8483 20 00Bearing housings, incorporating ball or roller bearings, for machineryImport78months published, 2018-11 to 2026-06
8483 40 90Gears and gearing, for machinery (excl. ball or roller screws and gears and gearing in general, and toothed wheels, chain sprockets and other transmission elements presented separately)
inventory_2Chapter 73Published 2016-01 to 2026-0627of 185 loaded codes15%
7326 90 98Articles of iron or steel, n.e.s.ImportExport
inventory_2Chapter 85Published 2017-04 to 2026-0218of 185 loaded codes10%
8501 52 90AC motors, multi-phase, of an output > 37 kW but <= 75 kWImport13
inventory_2Chapter 39Published 2016-04 to 2026-0714of 185 loaded codes8%
3917 29 00Rigid tubes, pipes and hoses, of plastics (excl. those of polymers of ethylene, propylene and vinyl chloride)Import
inventory_2Chapter 76Published 2016-06 to 2026-0710of 185 loaded codes5%
7604 21 00Hollow profiles of aluminium alloys, n.e.s.ImportExport
inventory_2Chapter 72Published 2018-06 to 2026-076of 185 loaded codes3%
7215 50 80Other bars and rods of iron or non-alloy steel, not further worked than cold-formed or cold-finished, containing by weight >= 0,25% of carbon (excl. those of free-cutting steel)Import
inventory_2Chapter 83Published 2016-09 to 2025-095of 185 loaded codes3%
8302 20 00Castors with mountings of base metalImport7
inventory_2Chapter 87Published 2016-03 to 2026-044of 185 loaded codes2%
8708 99 97Parts and accessories for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. of closed-die forged steel)ImportExport
inventory_2Chapter 75Published 2019-04 to 2024-013of 185 loaded codes2%
inventory_2Chapter 33Published 2018-06 to 2018-061of 185 loaded codes1%
3302 90 90Mixtures of odoriferous substances and mixtures based on one or more of these substances, of a kind used as raw materials in industry (excl. the food and drink industries and alcoholic solutions)Import
inventory_2Chapter 40Published 2022-01 to 2026-071of 185 loaded codes1%
4016 93 00Gaskets, washers and other seals, of vulcanised rubber (excl. hard rubber and those of cellular rubber)Import
inventory_2Chapter 70Published 2022-12 to 2022-121of 185 loaded codes1%
7002 39 00Tubes of glass, unworked (excl. tubes of glass having a linear coefficient of expansion <= 5 x 10-6 per kelvin within a temperature range of 0 C to 300 C or of fused quartz or other fused silica)Export
inventory_2Chapter 79Published 2022-10 to 2026-021of 185 loaded codes1%
8479 90 70Parts of machines and mechanical appliances having individual functions, n.e.s. (excl. of cast iron or cast steel)ImportExport60months published, 2017-06 to 2026-06
8481 90 00Parts of valves and similar articles for pipes, boiler shells, tanks, vats or the like, n.e.s.ImportExport49months published, 2017-01 to 2025-04
8483 90 89Toothed wheels, chain sprockets and other transmission elements presented separately and parts of transmission shafts and cranks; bearing housings and plain shaft bearings; gears and gearing, ball or roller screws, gear boxes and other speed changers, flywheels and pulleys, clutches and shaft couplings, n.e.s. (excl. of cast iron or cast steel)ImportExport49months published, 2016-06 to 2026-07
8481 80 40Valves for pneumatic tyres and inner-tubesImport48months published, 2019-08 to 2026-07
8487 90 90Machinery parts of chapter 84, not intended for a specific purpose, n.e.s.ImportExport42months published, 2016-07 to 2026-07
8418 99 90Parts of refrigerating or freezing equipment and heat pumps, n.e.s.ImportExport37months published, 2022-02 to 2026-07
8481 10 05Pressure-reducing valves combined with filters or lubricatorsImportExport30months published, 2019-05 to 2025-03
8481 80 19Taps, cocks and valves for sinks, washbasins, bidets, water cisterns, baths and similar fixtures (excl. mixing valves)ImportExport26months published, 2019-04 to 2023-10
8482 99 00Parts of ball or roller bearings (excl. balls, needles and rollers), n.e.s.ImportExport25months published, 2018-05 to 2026-03
8482 91 90Balls, needles and rollers for bearings (excl. tapered rollers and steel balls of heading 7326)Import23months published, 2022-03 to 2026-06
8483 40 29Gears and gearing, for machinery (excl. friction gears, spur, helical, bevel, bevel-spur gears and gearing and worm gear, gear boxes and other speed changers)Import23months published, 2019-04 to 2022-01
8481 80 99Appliances for pipes, boiler shells, tanks, vats or the like (excl. pressure-reducing valves, valves for the control of pneumatic power transmission, check "non-return" valves, safety or relief valves, taps, cocks and valves for sinks, baths and similar fixtures, central heating radiator valves, valves for pneumatic tyres and inner-tubes, process control valves, globe valves, gate valves, ball andImportExport21months published, 2018-11 to 2025-01
8467 92 00Parts of pneumatic tools for working in the hand, n.e.s.Import17months published, 2016-01 to 2025-08
8481 20 90Valves for the control of pneumatic power transmissionImportExport17months published, 2016-07 to 2025-12
8481 10 99Pressure-reducing valves of base metal (not combined with filters or lubricators)Import15months published, 2019-12 to 2025-07
8482 50 00Cylindrical roller bearings, incl. cage and roller assemblies (excl. bearings of 8482 10 to 8482 40)ImportExport15months published, 2022-05 to 2025-12
8483 40 21Spur and helical gears and gearing, for machinery (excl. friction gears, gear boxes and other speed changers)ImportExport11months published, 2016-08 to 2025-08
8466 93 60Parts and accessories for machine tools for working material by removing material of headings 8456 to 8461, n.e.s.ImportExport9months published, 2017-07 to 2023-11
8483 10 95Main shafts or driving shafts, counter shafts, cam shafts, eccentric shafts and other transmission shafts (excl. cranks, crank shafts and articulated shafts)Import9months published, 2016-01 to 2017-07
8421 39 25Machinery and apparatus for filtering or purifying air (excl. intake air filters for internal combustion engines, and those with stainless steel housing and with inlet and outlet tube bores with inside diameters <= 1,3 cm)Import7months published, 2019-06 to 2026-02
8443 99 90Parts and accessories of printers, copying machines and facsimile machines, n.e.s. (excl. electronic assemblies and of printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442)Import7months published, 2018-10 to 2022-02
8421 99 90Parts of machinery and apparatus for filtering or purifying liquids or gases, n.e.s.Import6months published, 2022-02 to 2025-06
8479 90 80Parts of machines and mechanical appliances having individual functions, n.e.s. (excl. of cast iron or cast steel)Import6months published, 2016-01 to 2016-10
8412 39 00Pneumatic power engines and motors (excl. linear acting)ImportExport5months published, 2025-07 to 2026-06
8482 40 00Needle roller bearings, incl. cage and needle roller assembliesImport5months published, 2023-02 to 2026-03
8483 60 80Clutches and shaft couplings, incl. universal joints (excl. of cast iron or cast steel)ImportExport5months published, 2021-11 to 2023-06
8421 39 85Machinery and apparatus for filtering or purifying gases other than air (excl. isotope separators, those using a catalytic process, those with stainless steel housing and with inlet and outlet tube bores with inside diameters <= 1,3 cm, and particulate filters for exhaust gases from internal combustion engines)Import4months published, 2019-03 to 2025-01
8482 10 90Ball bearings with greatest external diameter > 30 mmImport4months published, 2020-05 to 2026-07
8483 10 21Cranks and crank shafts, of cast iron or cast steelExport4months published, 2016-03 to 2022-10
8483 30 80Plain shaft bearings for machineryImportExport4months published, 2022-11 to 2024-02
8412 90 70Parts of non-electrical engines and motors, n.e.s.ImportExport3months published, 2026-02 to 2026-06
8428 33 00Continuous-action elevators and conveyors for goods or materials, belt type (excl. those for underground use)Import3months published, 2017-04 to 2024-06
8466 93 40Parts and accessories of machines of subheadings 84561110, 84561210, 845620, 845630, 845710, 845891, 84592100, 845961 or 846150 of a kind used solely or principally for the manufacture of printed circuits, printed circuit assemblies, parts of heading 8517, or parts of automatic data processing machinesImport3months published, 2021-10 to 2022-11
8483 40 25Worm gear for machinery (excl. friction gears, gear boxes and other speed changers)Import3months published, 2022-04 to 2025-05
8483 40 59Speed changers, incl. torque converters, for machinery (excl. gear boxes)Import3months published, 2022-05 to 2023-08
84Chapter-level link, no HMRC descriptionImport2months published, 2018-05 to 2018-08
8409 91 00Parts suitable for use solely or principally with spark-ignition internal combustion piston engine, n.e.s.Import2months published, 2021-05 to 2021-12
8412 90 20Parts of reaction engines, n.e.s. (excl. of turbojets)ImportExport2months published, 2022-11 to 2024-10
8414 90 00Parts of: air or vacuum pumps, air or other gas compressors, fans and ventilating or recycling hoods incorporating a fan, and gas-tight biological safety cabinets, n.e.s.ImportExport2months published, 2022-10 to 2024-09
8441 90 90Parts of machinery for making up paper pulp, paper or paperboard, n.e.s.Import2months published, 2024-02 to 2024-07
8459 70 00Threading or tapping machines for metals (excl. way-type unit head machines)Import2months published, 2021-08 to 2026-02
8479 89 97Machines, apparatus and mechanical appliances, n.e.s.ImportExport2months published, 2021-10 to 2023-07
8479 90 15Parts of automated electronic component placement machines of a kind used solely or principally for the manufacture of printed circuit assembliesImportExport2months published, 2023-10 to 2024-10
8412 10 00Reaction engines other than turbojetsExport1months published, 2025-03 to 2025-03
8412 80 80Engines and motors, non-electrical (excl. steam turbines, internal combustion piston engine, hydraulic turbines, water wheels, gas turbines, reaction engines, hydraulic power engines and motors, pneumatic power engines and motors, steam or other vapour power engines and electric motors)Import1months published, 2019-07 to 2019-07
8413 11 00Pumps fitted or designed to be fitted with a measuring device, for dispensing fuel or lubricants, of the type used in filling stations or in garagesExport1months published, 2022-12 to 2022-12
8415 90 00Parts of air conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, n.e.s.Import1months published, 2020-11 to 2020-11
8420 10 10Calendering or other rolling machines, of a kind used in the textile industryExport1months published, 2022-10 to 2022-10
8420 10 89Calendering or other rolling machines (excl. of a kind used in the textile or paper industries or for metals or glass, and roll laminators of a kind used solely or principally for the manufacture of printed circuit substrates or printed circuits)Export1months published, 2025-04 to 2025-04
8421 99 10Parts of machinery and apparatus of subheadings 84212920 or 84213915, n.e.s.Import1months published, 2022-05 to 2022-05
8422 19 00Dishwashing machines (excl. those of the household type)Import1months published, 2021-08 to 2021-08
8426 11 00Overhead travelling cranes on fixed supportExport1months published, 2022-11 to 2022-11
8428 90 90Lifting, handling, loading or unloading machinery, n.e.s.Import1months published, 2022-08 to 2022-08
8431 31 00Parts of lifts, skip hoists or escalators, n.e.s.Export1months published, 2018-11 to 2018-11
8432 90 00Parts of agricultural, horticultural or forestry machinery for soil preparation or cultivation or of lawn or sports-ground rollers, n.e.s.Import1months published, 2022-07 to 2022-07
8434 90 00Parts of milking machines and dairy machinery, n.e.s.Export1months published, 2016-07 to 2016-07
8438 90 00Parts of machinery for the industrial preparation or manufacture of food or drink, n.e.s.Import1months published, 2024-04 to 2024-04
8452 90 00Furniture, bases and covers for sewing machines and parts thereof; other parts of sewing machinesImport1months published, 2025-02 to 2025-02
8461 50 90Cutting-off machines for working metals, metal carbides or cermets (excl. machines for working in the hand and sawing machines)Import1months published, 2016-10 to 2016-10
8465 91 90Sawing machines for working wood, cork, bone, hard rubber, hard plastics or similar hard materials (excl. bandsaws, circular saws and machines for working in the hand)Import1months published, 2017-05 to 2017-05
8465 99 00Machine tools for working wood, cork, bone, hard rubber, hard plastics or similar hard materials (excl. machines for working in the hand, machines of subheadings 8465.10 and 8465.20, sawing machines, planing, milling or moulding "by cutting" machines, grinding, sanding or polishing machines, bending or assembling machines, drilling or mortising machines, splitting, slicing or paring machines and mImport1months published, 2018-12 to 2018-12
8466 91 20Parts and accessories for machine tools for working stone, ceramics, concrete, asbestos-cement or like mineral materials or for cold-working glass, n.e.s., of cast iron or cast steelImport1months published, 2021-07 to 2021-07
8466 93 70No description publishedImport1months published, 2016-10 to 2016-10
8466 94 00Parts and accessories for machine tools for working metal without removing material, n.e.s.Import1months published, 2022-11 to 2022-11
8467 11 10Tools for working in the hand, pneumatic, rotary type, for working metalExport1months published, 2022-01 to 2022-01
8467 99 00Parts of pneumatic tools for working in the hand, hydraulic or with self-contained electric or non-electric motor, n.e.s.Import1months published, 2020-08 to 2020-08
8471 49 00Data-processing machines, automatic, presented in the form of systems "comprising at least a central processing unit, one input unit and one output unit" (excl. portable weighing <= 10 kg and excl. peripheral units)Import1months published, 2023-01 to 2023-01
8471 80 00Units for automatic data-processing machines (excl. processing units, input or output units and storage units)Export1months published, 2024-10 to 2024-10
8471 90 00Magnetic or optical readers, machines for transcribing data onto data media in coded form and machines for processing such data, n.e.s.Import1months published, 2020-09 to 2020-09
8478 90 00Parts of machinery for preparing or making up tobacco, n.e.s.Import1months published, 2025-03 to 2025-03
8481 80 59Process control valves (excl. temperature regulators, pressure-reducing valves, valves for the control of oleohydraulic or pneumatic power transmission, check valves and safety or relief valves, taps, cocks and valves for sinks, washbasins, bidets, water cisterns, baths and similar fixtures and central heating radiator valves)Import1months published, 2021-11 to 2021-11
8482 10 10Ball bearings with greatest external diameter <= 30 mmExport1months published, 2022-06 to 2022-06
8482 91 10Tapered rollers for bearingsExport1months published, 2023-11 to 2023-11
8483 30 32Bearing housings for machinery, for ball or roller bearingsExport1months published, 2024-10 to 2024-10
8483 30 38Bearing housings not incorporating ball or roller bearings, for machinery and plain shaft bearings (excl. those for ball or roller bearings)Import1months published, 2018-01 to 2018-01
8483 40 51Gear boxes for machineryImport1months published, 2022-09 to 2022-09
8483 90 20Parts of bearing housings, n.e.s.Export1months published, 2023-09 to 2023-09
8487 90 51Parts of machinery of chapter 84, not intended for a specific purpose, of cast steel, n.e.s.Import1months published, 2022-05 to 2022-05
8487 90 59Parts of machinery of chapter 84, not intended for a specific purpose, of iron or steel, n.e.s. (other than cast, open-die or closed-die forged)Import1months published, 2022-07 to 2022-07
73
months published, 2016-01 to 2026-06
7318 29 00Non-threaded articles, of iron or steelImportExport36months published, 2016-01 to 2026-06
7318 11 00Coach screws of iron or steelImport31months published, 2016-01 to 2020-08
7318 16 60Self-locking nuts of iron or steel other than stainlessImport8months published, 2017-09 to 2025-10
Show the 27 sampled codesShow fewer codesexpand_moreexpand_less
7318 16 99Nuts of iron or steel other than stainless, with an inside diameter > 12 mm (excl. blind rivet nuts and self-locking nuts)Import5months published, 2018-05 to 2023-12
7318 15 95Screws and bolts, of iron or steel "whether or not with their nuts and washers", with heads (excl. with slotted, cross-recessed or hexagonal head; wood screws, self-tapping screws and screws and bolts for fixing railway track construction material, screw hooks and screw rings)Import4months published, 2018-01 to 2024-04
7318 16 92Nuts of iron or steel other than stainless, with an inside diameter <= 12 mm (excl. blind rivet nuts and self-locking nuts)Import4months published, 2021-03 to 2021-10
7318 19 00Threaded articles, of iron or steel, n.e.s.Import4months published, 2018-11 to 2024-01
7318 15 58Screws and bolts, of iron or steel other than stainless "whether or not with their nuts and washers", with slotted or cross-recessed heads (excl. wood screws and self-tapping screws)Import3months published, 2017-07 to 2022-03
7318 16 39Nuts of stainless steel (excl. blind rivet nuts)Import3months published, 2019-09 to 2019-11
7318 24 00Cotters and cotter pins, of iron or steelImport3months published, 2025-06 to 2025-10
7307 19 90Cast tube or pipe fittings of steelImport2months published, 2022-05 to 2022-08
7318 15 35Screws and bolts, of stainless steel "whether or not with their nuts and washers", without heads (excl. screws and bolts for fixing railway track construction material)Import2months published, 2021-03 to 2021-05
7318 16 40Blind rivet nuts of iron or steel other than stainlessImport2months published, 2023-10 to 2024-04
7326 20 00Articles of iron or steel wire, n.e.s.Import2months published, 2021-07 to 2021-09
7301 20 00Angles, shapes and sections, of iron or steel, weldedImport1months published, 2019-10 to 2019-10
7307 29 10Threaded tube or pipe fittings of stainless steel (excl. cast products, flanges, elbows, bends and sleeves)Export1months published, 2025-11 to 2025-11
7307 91 00Flanges of iron or steel (excl. cast or stainless products)Import1months published, 2023-08 to 2023-08
7307 99 80Tube or pipe fittings, of iron or steel (excl. of cast iron or stainless steel, threaded, butt welding fittings, and flanges)Import1months published, 2020-02 to 2020-02
7314 41 00Grill, netting and fencing, of iron or steel wire, not welded at the intersection, plated or coated with zincImport1months published, 2023-01 to 2023-01
7318 13 00Screw hooks and screw rings, of iron or steelImport1months published, 2018-12 to 2018-12
7318 14 99Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws)Import1months published, 2020-05 to 2020-05
7318 15 20Screws and bolts, of iron or steel "whether or not with their nuts and washers", for fixing railway track construction material (excl. coach screws)Export1months published, 2024-10 to 2024-10
7318 15 62Hexagonal-socket head screws and bolts, of stainless steel "whether or not with their nuts and washers" (excl. wood screws, self-tapping screws and screws and bolts for fixing railway track construction material)Import1months published, 2023-03 to 2023-03
7318 15 68Hexagonal-socket head screws and bolts, of iron or steel other than stainless "whether or not with their nuts and washers" (excl. wood screws, self-tapping screws and screws and bolts for fixing railway track construction material)Import1months published, 2025-03 to 2025-03
7318 16 31Blind rivet nuts of stainless steelImport1months published, 2021-08 to 2021-08
7326 11 00Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further workedExport1months published, 2021-06 to 2021-06
months published, 2017-04 to 2022-08
8536 50 80Switches for a voltage of > 60 V and <= 1.000 V (excl. relays, automatic circuit breakers, electronic AC switches consisting of optically coupled input and output circuits "insulated thyristor AC switches", electronic switches, incl. temperature protected electronic switches, consisting of a transistor and a logic chip [chip-on-chip technology] and electromechanical snap-action switches for a currImport10months published, 2020-02 to 2025-04
8504 40 90Static converters (excl. of a kind used with telecommunication apparatus, automatic data-processing machines and units thereof, battery chargers, polycrystalline semiconductor and other rectifiers, and a.c. converters)Import8months published, 2018-03 to 2022-08
8536 69 90Plugs and sockets for a voltage of <= 1.000 V (excl. those for coaxial cables and printed circuits)Import4months published, 2017-09 to 2018-10
Show the 18 sampled codesShow fewer codesexpand_moreexpand_less
8536 50 03Electronic AC switches consisting of optically coupled input and output circuits "insulated thyristor AC switches" (excl. relays and automatic circuit breakers)ImportExport3months published, 2022-01 to 2024-04
8501 10 10Synchronous motors of an output <= 18 WExport2months published, 2021-09 to 2024-04
8501 51 00AC motors, multi-phase, of an output > 37,5 W but <= 750 WImport2months published, 2023-04 to 2023-05
8505 19 90Permanent magnets and articles intended to become permanent magnets after magnetization, of materials other than metal or agglomerated ferriteImport2months published, 2022-09 to 2024-08
8536 90 95Electrical apparatus for making connections to or in electrical circuits, for a voltage <= 1.000 V (excl. fuses, circuit breakers and other apparatus for protecting electrical circuits, relays and other switches, lamp holders, plugs and sockets, prefabricated elements for electrical circuits, connections and contact elements for wire and cables, and car battery clamps)Import2months published, 2024-05 to 2025-06
8501 10 91Universal AC-DC motors of an output <= 37,5 WImport1months published, 2023-10 to 2023-10
8501 34 00DC motors and DC generators of an output > 375 kW (excl. photovoltaic generators)Export1months published, 2026-02 to 2026-02
8501 80 00Photovoltaic AC generatorsImport1months published, 2022-09 to 2022-09
8505 11 10Permanent magnets of metal and articles intended to become permanent magnets after magnetization, containing neodymium, praseodymium, dysprosium or samarium (excl. chucks, clamps and similar holding devices)Import1months published, 2023-02 to 2023-02
8505 11 90Permanent magnets of metal and articles intended to become permanent magnets after magnetization (excl. containing neodymium, praseodymium, dysprosium or samarium, and chucks, clamps and similar holding devices)Import1months published, 2024-01 to 2024-01
8536 69 10Plugs and sockets for a voltage of <= 1.000 V, for coaxial cablesImport1months published, 2024-02 to 2024-02
8536 90 40Battery clamps of a kind used for motor vehicles of heading 8702, 8703, 8704, or 8711Import1months published, 2021-11 to 2021-11
8542 31 90Electronic integrated circuits as processors and controllers, whether or not combined with memories, converters, logic circuits, amplifiers, clock and timing circuits, or other circuits (excl. in the form of multichip or multi-component integrated circuits)Export1months published, 2021-07 to 2021-07
8542 39 90Electronic integrated circuits (excl. in the form of multichip or multi-component integrated circuits and such as processors, controllers, memories and amplifiers)Import1months published, 2020-06 to 2020-06
51
months published, 2019-04 to 2026-07
3926 90 97Articles of plastics and articles of other materials of heading 3901 to 3914, n.e.s.Import24months published, 2016-04 to 2025-12
3917 32 00Flexible tubes, pipes and hoses of plastics, not reinforced or otherwise combined with other materials, without fittingsImport15months published, 2018-02 to 2024-11
3916 90 90Monofilament of which any cross-sectional dimension > 1 mm, rods, sticks and profile shapes, of plastics, whether or not surface-worked but not further worked (excl. that of addition polymerization products, condensation or rearrangement polymerization products, whether or not chemically modified)Import14months published, 2020-10 to 2026-02
Show the 14 sampled codesShow fewer codesexpand_moreexpand_less
3917 40 00Fittings, e.g. joints, elbows, flanges, of plastics, for tubes, pipes and hosesImport11months published, 2019-05 to 2025-12
3923 50 90Stoppers, lids, caps and other closures, of plastics (excl. caps and capsules for bottles)Import8months published, 2021-04 to 2025-08
3916 20 00Monofilament with any cross-sectional dimension of > 1 mm, rods, sticks and profile shapes, whether or not surface-worked but not otherwise worked, of polymers of vinyl chlorideImport3months published, 2020-09 to 2022-02
3926 30 00Fittings for furniture, coachwork and the like, of plastics (excl. building components for permanent mounting on parts of buildings)Import3months published, 2021-07 to 2022-02
3926 10 00Office or school supplies, of plastics, n.e.s.Export2months published, 2022-03 to 2022-09
3917 10 90Artificial guts "sausage casings" of cellulose materialsImport1months published, 2020-03 to 2020-03
3917 21 90Rigid tubes, pipes and hoses, of polymers of ethylene (excl. seamless and cut to length only)Import1months published, 2016-06 to 2016-06
3917 22 90Rigid tubes, pipes and hoses, of polymers of propylene (excl. seamless and cut to length only)Import1months published, 2019-04 to 2019-04
3920 51 00Plates, sheets, film, foil and strip, of non-cellular poly"methyl methacrylate", not reinforced, laminated, supported or similarly combined with other materials, without backing, unworked or merely surface-worked or merely cut into squares or rectangles (excl. self-adhesive products, and floor, wall and ceiling coverings of heading 3918)Import1months published, 2019-07 to 2019-07
3923 10 10Boxes, cases, crates and similar articles, of plastic, specially shaped or fitted for the conveyance or packing of semiconductor wafers, masks, or reticlesImport1months published, 2022-08 to 2022-08
65
months published, 2018-10 to 2026-07
7604 29 90Solid profiles, of aluminium alloys, n.e.s.Import32months published, 2016-06 to 2026-06
7616 99 90Articles of aluminium, uncast, n.e.s.ImportExport31months published, 2016-06 to 2026-07
7610 90 90Structures and parts of structures, of aluminium, n.e.s., and plates, rods, profiles, tubes and the like, prepared for use in structures, of aluminium, n.e.s. (excl. prefabricated buildings of heading 9406, doors and windows and their frames and thresholds for doors, bridges and bridge-sections, towers and lattice masts)Import30months published, 2019-07 to 2026-05
Show the 10 sampled codesShow fewer codesexpand_moreexpand_less
7604 10 90Profiles of non-alloy aluminium, n.e.s.Import7months published, 2018-07 to 2026-02
7604 10 10Bars, rods and profiles, of non-alloy aluminiumImportExport6months published, 2018-06 to 2022-12
7612 10 00Collapsible tubular containers, of aluminiumImport2months published, 2021-11 to 2025-01
7601 20 80Unwrought aluminium alloys (excl. slabs and billets)Import1months published, 2026-07 to 2026-07
7608 20 89Tubes and pipes of aluminium alloys (excl. such products welded or not further worked than extruded, and hollow profiles)Import1months published, 2016-09 to 2016-09
7616 10 00Nails, tacks, staples, screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles, of aluminium (excl. staples in strips, plugs, bungs and the like, threaded)Import1months published, 2026-01 to 2026-01
14
months published, 2022-02 to 2025-06
7220 20 89Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of <= 0,35 mm and containing by weight < 2,5% nickelImport14months published, 2022-04 to 2026-07
7222 20 21Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section measuring >= 25 mm but < 80 mm and containing by weight >= 2,5% nickelImport6months published, 2022-02 to 2025-02
7215 90 00Bars or rods, of iron or non-alloy steel, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s.Import2months published, 2018-06 to 2026-02
Show the 6 sampled codesShow fewer codesexpand_moreexpand_less
7222 20 31Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section measuring < 25 mm and containing by weight >= 2,5% nickelImport1months published, 2025-02 to 2025-02
7222 20 89Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, containing by weight < 2,5% nickel (excl. such products of circular cross-section)Import1months published, 2022-06 to 2022-06
months published, 2021-07 to 2025-09
8302 49 00Base metal mountings, fittings and similar articles (excl. locks with keys, clasps and frames with clasps incorporating locks, hinges, castors and mountings and fittings suitable for buildings, motor vehicles or furniture)Import4months published, 2018-06 to 2024-04
8301 40 11Cylinder locks of a kind used for doors of buildings, of base metalImport1months published, 2021-07 to 2021-07
8301 40 90Locks of base metal (excl. padlocks and locks of a kind used for motor vehicles, furniture or doors of buildings)Import1months published, 2024-05 to 2024-05
Show the 5 sampled codesShow fewer codesexpand_moreexpand_less
8302 30 00Base metal mountings, fittings and similar articles suitable for motor vehicles (excl. hinges and castors)Import1months published, 2016-09 to 2016-09
11
months published, 2016-08 to 2026-02
8708 80 99Suspension systems and parts thereof, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.80.20, shock-absorbers, anti rollImport5months published, 2016-03 to 2026-04
8708 10 10Bumpers and parts thereof, for the industrial assembly of motor cars and other motor vehicles principally designed for the transport of persons, vehicles for the transport of goods with compression-ignition internal combustion piston engine "diesel or semi-diesel engine" of a cylinder capacity <= 2.500 cm or with spark-ignition internal piston engine of a cylinder capacity <= 2.800 cm and speciaExport2months published, 2020-03 to 2022-09
8708 80 35Suspension shock-absorbers for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.80.20)Import1months published, 2017-11 to 2017-11
months published, 2019-04 to 2022-05
7507 20 00Tube or pipe fittings, of nickelImport5months published, 2022-02 to 2024-01
7507 11 00Tubes and pipes of non-alloy nickelImport4months published, 2019-08 to 2022-09
months published, 2017-05 to 2022-02
9018 90 84Instruments and appliances used in medical, surgical or veterinary sciences, n.e.s.Import1months published, 2020-02 to 2020-02
9026 20 80Instruments and apparatus for measuring or checking pressure of liquids or gases, non-electronic (excl. spiral or metal diaphragm type pressure gauges, and regulators)Import1months published, 2016-12 to 2016-12
months published, 2017-01 to 2019-03
4805 40 00Filter paper and paperboard, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded stateImport1months published, 2021-07 to 2021-07
months published, 2018-08 to 2025-12
7415 33 00Screws, bolts, nuts and similar articles, threaded, of copper (other than screw hooks, ring- and eyebolts, lag screws, plugs, bungs and the like, with screw thread)Import3months published, 2021-07 to 2023-03
1
months published, 2018-06 to 2018-06
20
months published, 2022-01 to 2026-07
1
months published, 2022-12 to 2022-12
months published, 2022-10 to 2026-02
months published, 2024-01 to 2024-01
months published, 2021-05 to 2021-05
MATARA UK LTD · Tradaro
On the same codes
Traders published against the most of the same codes. A shared code is a shared commodity, not a relationship between them.