A filled cell is a month with at least one published link in the loaded scope. A gap is a month with no published link, not a month without trade.
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
Published in 118 months between 2016-01 and 2026-07. Each published month is listed with its commodity code count in the table above.
at least one published link
no published link in this month
outside the loaded window
swap_horizPublished as both an importer and an exporter, against 141 commodity codes across 19 tariff chapters.
event_busyPublished in 118 of the 126 months from February 2016 to July 2026. A missing month is one with no published link, not a month without trade.
scatter_plotSpread across 19 tariff chapters, none of them holding half the loaded codes.
south_westThe chapter 59 codes are import only.
What it trades
Grouped by tariff chapter, most published codes first. Descriptions are HMRC’s own, verbatim. This list is bounded: codes outside the loaded coverage are not listed.
inventory_2Chapter 84Published 2016-02 to 2026-0770of 141 loaded codes50%
8413 91 00Parts of pumps for liquids, n.e.s.ImportExport89months published, 2016-02 to 2026-07
8413 70 81Single-stage centrifugal pumps, power-driven, with a discharge outlet diameter > 15 mm (excl. pumps of subheading 8413.11 and 8413.19; fuel, lubricating or cooling medium pumps for internal combustion piston engine; concrete pumps; submersible pumps; impeller pumps for heating systems and warm water supply; channel impeller, side channel and general radial flow pumps)ImportExport57months published, 2016-03 to 2026-07
8413 50 40Dosing and proportioning reciprocating positive displacement pumps, power-drivenImportExport55months published, 2021-02 to 2026-07
8419 50 80Heat-exchange units (excl. those used with boilers and those made of fluoropolymers with inlet and outlet tube bores with inside diameters measuring <=3 cm)ImportExport50months published, 2017-07 to 2026-07
Show the 70 sampled codesShow fewer codesexpand_moreexpand_less
8481 80 73Globe valves of steel (excl. temperature regulators, pressure-reducing valves, valves for the control of oleohydraulic or pneumatic power transmission, check valves and safety or relief valves, process control valves, taps, cocks and valves for sinks, washbasins, bidets, water cisterns, baths and similar fixtures, and central heating radiator valves)Import50months published, 2022-01 to 2026-07
inventory_2Chapter 73Published 2021-10 to 2026-0721of 141 loaded codes15%
7326 90 98Articles of iron or steel, n.e.s.ImportExport
inventory_2Chapter 85Published 2021-10 to 2026-0717of 141 loaded codes12%
8501 52 90AC motors, multi-phase, of an output > 37 kW but <= 75 kWImportExport
inventory_2Chapter 90Published 2021-09 to 2026-0712of 141 loaded codes9%
9023 00 80Instruments, apparatus and models designed for demonstrational purposes, e.g. in education or exhibitions, unsuitable for other uses (excl. ground flying trainers of heading 8805, collectors' pieces of heading 9705, antiques of an age > 100 years of heading 9706 and of the type used for teaching physics, chemistry and technical subjects)ImportExport
inventory_2Chapter 40Published 2022-12 to 2026-053of 141 loaded codes2%
4016 93 00Gaskets, washers and other seals, of vulcanised rubber (excl. hard rubber and those of cellular rubber)ImportExport
inventory_2Chapter 39Published 2021-08 to 2026-062of 141 loaded codes1%
3926 90 97Articles of plastics and articles of other materials of heading 3901 to 3914, n.e.s.ImportExport
inventory_2Chapter 49Published 2022-02 to 2026-052of 141 loaded codes1%
4901 99 00Printed books, brochures and similar printed matter (excl. those in single sheets; dictionaries, encyclopaedias, periodicals and publications which are essentially devoted to advertising)Import
inventory_2Chapter 59Published 2021-09 to 2026-072of 141 loaded codes1%
5911 90 99Textile products and articles, for technical purposes, specified in Note 7 to chapter 59, n.e.s.Import2
inventory_2Chapter 69Published 2023-05 to 2026-042of 141 loaded codes1%
6914 90 00Ceramic articles, n.e.s. (excl. of porcelain or china)Import4
inventory_2Chapter 34Published 2025-05 to 2025-051of 141 loaded codes1%
3403 99 00Lubricant preparations, incl. cutting-oil preparations, bolt or nut release preparations, anti-rust or anti-corrosion preparations and mould-release preparations, based on lubricants but not containing petroleum oil or bituminous mineral oil (excl. preparations for the treatment of textiles, leather, furskins and other materials)Export
inventory_2Chapter 42Published 2022-03 to 2022-031of 141 loaded codes1%
4202 19 10Trunks, suitcases, vanity cases, executive-cases, briefcases, school satchels and similar containers, with outer surface of aluminiumExport
inventory_2Chapter 44Published 2026-01 to 2026-011of 141 loaded codes1%
4415 20 90Box pallets and other load boards, of wood (excl. containers specially designed and equipped for one or more modes of transport; flat pallets and pallet collars)Import
inventory_2Chapter 48Published 2023-07 to 2023-071of 141 loaded codes1%
4823 90 85Paper, paperboard, cellulose wadding and webs of cellulose fibres, in strips or rolls of a width <= 36 cm, in rectangular or square sheets, of which no side > 36 cm in the unfolded state, or cut to shape other than rectangular or square, and articles of paper pulp, paper, cellulose wadding or webs of cellulose fibres, n.e.s.Import
inventory_2Chapter 68Published 2026-05 to 2026-051of 141 loaded codes1%
6815 11 00Carbon fibresImport1months published, 2026-05 to 2026-05
inventory_2Chapter 74Published 2025-07 to 2026-061of 141 loaded codes1%
7419 20 00Articles of copper, cast, moulded, stamped or forged, but not further worked, n.e.s.Import2
inventory_2Chapter 75Published 2022-03 to 2024-031of 141 loaded codes1%
inventory_2Chapter 76Published 2024-04 to 2025-111of 141 loaded codes1%
7616 99 90Articles of aluminium, uncast, n.e.s.Import2
inventory_2Chapter 82Published 2023-06 to 2025-041of 141 loaded codes1%
8205 59 80Hand tools, incl. glaziers' diamonds, of base metal, n.e.s.Import3
inventory_2Chapter 83Published 2025-12 to 2025-121of 141 loaded codes1%
8307 90 00Flexible tubing of base metal other than iron or steel, with or without fittingsImport1
Gear pumps, power-driven (excl. pumps of subheading 8413.11 and 8413.19, fuel, lubricating or cooling medium pumps for internal combustion piston engine and hydraulic pumps, incl. hydraulic units)
ImportExport
47months published, 2022-01 to 2026-07
8413 60 70Screw pumps, power-driven (excl. pumps of subheading 8413.11 and 8413.19, fuel, lubricating or cooling medium pumps for internal combustion piston engine, concrete pumps and hydraulic units)ImportExport47months published, 2022-01 to 2026-07
8481 40 10Safety or relief valves of cast iron or of steelImportExport47months published, 2022-01 to 2026-07
8481 90 00Parts of valves and similar articles for pipes, boiler shells, tanks, vats or the like, n.e.s.ImportExport46months published, 2022-01 to 2026-07
8484 20 00Mechanical sealsImportExport34months published, 2023-05 to 2026-07
8483 10 95Main shafts or driving shafts, counter shafts, cam shafts, eccentric shafts and other transmission shafts (excl. cranks, crank shafts and articulated shafts)ImportExport32months published, 2022-05 to 2026-07
8413 70 21Submersible pumps, single-stageImportExport30months published, 2018-01 to 2026-07
8483 30 80Plain shaft bearings for machineryImport30months published, 2022-02 to 2026-06
8483 90 89Toothed wheels, chain sprockets and other transmission elements presented separately and parts of transmission shafts and cranks; bearing housings and plain shaft bearings; gears and gearing, ball or roller screws, gear boxes and other speed changers, flywheels and pulleys, clutches and shaft couplings, n.e.s. (excl. of cast iron or cast steel)ImportExport30months published, 2022-01 to 2026-07
8421 29 80Machinery and apparatus for filtering or purifying liquids (excl. such machinery and apparatus for water and other beverages, oil or petrol filters for internal combustion engines, artificial kidneys, and those made of fluoropolymers with filter or purifier membrane thickness <= 140 ?m)Import18months published, 2021-07 to 2026-03
8413 92 00Parts of liquid elevators, n.e.s.ImportExport17months published, 2017-09 to 2026-02
8479 89 97Machines, apparatus and mechanical appliances, n.e.s.ImportExport16months published, 2021-11 to 2026-07
8481 80 87Diaphragm valves for pipes, boiler shells, tanks, vats or the likeImportExport16months published, 2022-02 to 2024-08
8479 90 20Parts of machines and mechanical appliances having individual functions, of cast iron or cast steel, n.e.s.Import14months published, 2022-07 to 2026-04
8483 30 32Bearing housings for machinery, for ball or roller bearingsImport14months published, 2023-06 to 2026-07
8482 10 90Ball bearings with greatest external diameter > 30 mmImport13months published, 2023-07 to 2026-07
8482 20 00Tapered roller bearings, incl. cone and tapered roller assembliesImport13months published, 2022-12 to 2026-06
8413 70 29Submersible pumps, multi-stageImportExport11months published, 2016-10 to 2023-04
8483 40 51Gear boxes for machineryImportExport11months published, 2022-04 to 2026-04
8413 70 89Multi-stage centrifugal pumps, power-driven, with a discharge outlet diameter > 15 mm (excl. pumps of subheading 8413.11 and 8413.19; fuel, lubricating or cooling medium pumps for internal combustion piston engine; concrete pumps; submersible pumps; impeller pumps for heating systems and warm water supply; channel impeller, side channel and general radial flow pumps)ImportExport10months published, 2016-12 to 2025-11
8484 10 00Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metalImport10months published, 2022-02 to 2026-07
8483 40 90Gears and gearing, for machinery (excl. ball or roller screws and gears and gearing in general, and toothed wheels, chain sprockets and other transmission elements presented separately)Import8months published, 2022-11 to 2025-04
8413 50 80Reciprocating positive displacement pumps, power-driven (excl. pumps of subheading 8413.11 and 8413.19, fuel, lubricating or cooling medium pumps for internal combustion piston engine, concrete pumps, hydraulic units, dosing pumps and general piston pumps)ImportExport7months published, 2021-03 to 2025-04
8413 60 80Rotary positive displacement pumps, power-driven (excl. pumps of subheading 8413.11 and 8413.19, fuel, lubricating or cooling medium pumps for internal combustion piston engine, concrete pumps, gear pumps, vane pumps, screw pumps and hydraulic units)ImportExport7months published, 2022-03 to 2026-06
8421 39 25Machinery and apparatus for filtering or purifying air (excl. intake air filters for internal combustion engines, and those with stainless steel housing and with inlet and outlet tube bores with inside diameters <= 1,3 cm)ImportExport7months published, 2022-05 to 2026-02
8479 90 70Parts of machines and mechanical appliances having individual functions, n.e.s. (excl. of cast iron or cast steel)Import7months published, 2022-08 to 2025-10
8419 60 00Machinery for liquefying air or other gasesImportExport6months published, 2018-01 to 2021-07
8421 99 90Parts of machinery and apparatus for filtering or purifying liquids or gases, n.e.s.Import6months published, 2023-06 to 2026-03
8487 90 90Machinery parts of chapter 84, not intended for a specific purpose, n.e.s.ImportExport6months published, 2022-03 to 2024-03
8482 99 00Parts of ball or roller bearings (excl. balls, needles and rollers), n.e.s.Import5months published, 2024-02 to 2025-08
8413 19 00Pumps for liquids, fitted or designed to be fitted with a measuring device (excl. pumps for dispensing fuel or lubricants, of the type used in filling stations or in garages)ImportExport4months published, 2021-12 to 2026-02
8482 50 00Cylindrical roller bearings, incl. cage and roller assemblies (excl. bearings of 8482 10 to 8482 40)Import4months published, 2023-06 to 2026-02
8483 40 59Speed changers, incl. torque converters, for machinery (excl. gear boxes)ImportExport4months published, 2024-04 to 2026-07
8414 90 00Parts of: air or vacuum pumps, air or other gas compressors, fans and ventilating or recycling hoods incorporating a fan, and gas-tight biological safety cabinets, n.e.s.Import3months published, 2021-07 to 2026-03
8419 90 85Parts of machinery, plant and laboratory equipment, whether or not electrically heated, for the treatment of materials by a process involving a change of temperature, and of non-electric instantaneous and storage water heaters, n.e.s. (excl. of medical, surgical or laboratory sterilizers, those for the manufacture of semiconductor boules or wafers, semiconductor devices, electronic integrated circImport3months published, 2019-12 to 2026-05
8481 30 91Check "non-return" valves for pipes, boiler shells, tanks, vats or the like, of cast iron or of steelImport3months published, 2023-05 to 2024-07
8484 90 00Sets or assortments of gaskets and similar joints, dissimilar in composition, put up in pouches, envelopes or similar packingsImport3months published, 2023-10 to 2025-12
8413 60 31Hydraulic fluid power gear pumps (excl. hydraulic units)ImportExport2months published, 2022-03 to 2024-10
8413 60 69Vane pumps, power-driven (excl. pumps of subheading 8413.11 and 8413.19, fuel, lubricating or cooling medium pumps for internal combustion piston engine and hydraulic pumps, incl. hydraulic units)Import2months published, 2022-02 to 2022-09
8413 70 30Glandless impeller pumps for heating systems and warm water supplyImportExport2months published, 2019-08 to 2021-12
8421 39 85Machinery and apparatus for filtering or purifying gases other than air (excl. isotope separators, those using a catalytic process, those with stainless steel housing and with inlet and outlet tube bores with inside diameters <= 1,3 cm, and particulate filters for exhaust gases from internal combustion engines)Import2months published, 2024-03 to 2024-07
8466 20 20Work holders for machine tools in the form of jigs and fixtures for specific applications, incl. sets of standard jig and fixture componentsImportExport2months published, 2025-05 to 2025-07
8483 60 80Clutches and shaft couplings, incl. universal joints (excl. of cast iron or cast steel)Import2months published, 2024-07 to 2026-01
8483 90 81Toothed wheels, chain sprockets and other transmission elements presented separately and parts of transmission shafts and cranks; bearing housings and plain shaft bearings; gears and gearing, ball or roller screws, gear boxes and other speed changers, flywheels and pulleys, clutches and shaft couplings, of cast iron or cast steel, n.e.s.Import2months published, 2022-04 to 2024-05
8409 99 00Parts suitable for use solely or principally with compression-ignition internal combustion piston engine "diesel or semi-diesel engine", n.e.s.Import1months published, 2023-12 to 2023-12
8413 20 00Hand pumps for liquids (excl. those of subheading 8413.11 and 8413.19)Import1months published, 2024-04 to 2024-04
8413 30 20Injection pumps for internal combustion piston engineExport1months published, 2021-11 to 2021-11
8413 30 80Fuel, lubricating or cooling medium pumps for internal combustion piston engine (excl. injection pumps)Import1months published, 2017-04 to 2017-04
8413 50 20Reciprocating positive displacement hydraulic units, with pumpsExport1months published, 2018-04 to 2018-04
8413 50 61Hydraulic fluid power piston pumps (excl. hydraulic units)Import1months published, 2023-07 to 2023-07
8413 50 69Piston pumps, power-driven (excl. pumps of subheading 8413.11 and 8413.19, fuel, lubricating or cooling medium pumps for internal combustion piston engine, concrete pumps, hydraulic pumps, incl. hydraulic units, and dosing pumps)Export1months published, 2024-10 to 2024-10
8413 70 59Radial flow centrifugal pumps with a discharge outlet diameter > 15 mm, single-stage, with single entry impeller (other than monobloc and excl. pumps of subheading 8413.11 and 8413.19)Export1months published, 2023-08 to 2023-08
8414 80 11Turbocompressors, single-stage (excl. compressors for refrigerating equipment and air compressors mounted on a wheeled chassis for towing)Export1months published, 2025-07 to 2025-07
8414 80 19Turbocompressors, multi-stage (excl. compressors for refrigerating equipment and air compressors mounted on a wheeled chassis for towing)Import1months published, 2022-12 to 2022-12
8414 80 22Reciprocating displacement compressors, having a gauge pressure capacity <= 15 bar, giving a flow/h <= 60 m (excl. compressors for refrigerating equipment and air compressors mounted on a wheeled chassis for towing)Import1months published, 2021-07 to 2021-07
8414 80 51Reciprocating displacement compressors, having a gauge pressure capacity > 15 bar, giving a flow/h <= 120 m (excl. compressors for refrigerating equipment and air compressors mounted on a wheeled chassis for towing)Import1months published, 2022-11 to 2022-11
8414 80 80Air pumps and ventilating or recycling hoods incorporating a fan, whether or not fitted with filters, with a maximum horizontal side > 120 cm (excl. vacuum pumps, hand- or foot-operated air pumps, compressors and gas-tight biological safety cabinets)Export1months published, 2022-07 to 2022-07
8419 50 20Heat exchange units made of fluoropolymers and with inlet and outlet tube bores with inside diameters measuring <=3 cmImport1months published, 2019-09 to 2019-09
8439 10 00Machinery for making pulp of fibrous cellulosic material (excl. autoclaves, boilers and other heating appliances)Export1months published, 2024-10 to 2024-10
8481 10 05Pressure-reducing valves combined with filters or lubricatorsExport1months published, 2019-04 to 2019-04
8481 10 99Pressure-reducing valves of base metal (not combined with filters or lubricators)Import1months published, 2024-03 to 2024-03
8481 20 90Valves for the control of pneumatic power transmissionImport1months published, 2024-09 to 2024-09
8481 40 90Safety or relief valves (excl. those of cast iron or steel)Import1months published, 2020-02 to 2020-02
8481 80 81Ball and plug valves for pipes, boiler shells, tanks, vats or the like (excl. taps, cocks and valves for sinks, washbasins, bidets, water cisterns, baths and similar fixtures, and central heating radiator valves)Import1months published, 2024-07 to 2024-07
8482 10 10Ball bearings with greatest external diameter <= 30 mmImport1months published, 2024-09 to 2024-09
32
months published, 2022-01 to 2026-06
7307 29 80Tube or pipe fittings of stainless steel (excl. cast, threaded, butt welding fittings and flanges)ImportExport27months published, 2023-06 to 2026-07
7320 20 81Coil compression springs, of iron or steelImport14months published, 2022-07 to 2026-06
7325 10 00Articles of non-malleable cast iron, n.e.s.Import10months published, 2022-01 to 2026-06
Show the 21 sampled codesShow fewer codesexpand_moreexpand_less
7318 21 00Spring washers and other lock washers, of iron or steelImport7months published, 2022-05 to 2026-04
7318 15 35Screws and bolts, of stainless steel "whether or not with their nuts and washers", without heads (excl. screws and bolts for fixing railway track construction material)Import6months published, 2022-02 to 2026-06
7318 16 39Nuts of stainless steel (excl. blind rivet nuts)Import6months published, 2022-08 to 2026-05
7318 22 00Washers of iron or steel (excl. spring washers and other lock washers)ImportExport6months published, 2022-12 to 2026-05
7304 41 00Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas)Import5months published, 2022-03 to 2026-04
7307 21 00Flanges of stainless steel (excl. cast products)Import4months published, 2023-12 to 2024-04
7308 90 98Structures and parts of structures of iron or steel, n.e.s. (excl. bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet)Import4months published, 2025-03 to 2026-04
7318 19 00Threaded articles, of iron or steel, n.e.s.Import3months published, 2023-10 to 2025-11
7318 15 48Screws and bolts, of iron or steel other than stainless "whether or not with their nuts and washers", without heads, with a tensile strength of >= 800 MPa (excl. screws and bolts for fixing railway track construction material)Import2months published, 2024-09 to 2025-04
7318 15 95Screws and bolts, of iron or steel "whether or not with their nuts and washers", with heads (excl. with slotted, cross-recessed or hexagonal head; wood screws, self-tapping screws and screws and bolts for fixing railway track construction material, screw hooks and screw rings)Import2months published, 2023-11 to 2024-06
7318 16 99Nuts of iron or steel other than stainless, with an inside diameter > 12 mm (excl. blind rivet nuts and self-locking nuts)Import2months published, 2023-10 to 2025-10
7304 90 00Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron)Import1months published, 2024-09 to 2024-09
7307 99 80Tube or pipe fittings, of iron or steel (excl. of cast iron or stainless steel, threaded, butt welding fittings, and flanges)Import1months published, 2021-10 to 2021-10
7309 00 59Reservoirs, tanks, vats and similar containers, of iron or steel, for liquids, of a capacity of <= 100.000 l but > 300 l (excl. containers lined or heat-insulated or fitted with mechanical or thermal equipment and containers specifically constructed or equipped for one or more types of transport)Import1months published, 2025-11 to 2025-11
7318 15 42Screws and bolts, of iron or steel other than stainless "whether or not with their nuts and washers", without heads, with a tensile strength of < 800 MPa (excl. screws and bolts for fixing railway track construction material)Import1months published, 2023-04 to 2023-04
7320 90 10Flat spiral springs, of iron or steelImport1months published, 2025-03 to 2025-03
7326 19 90Articles of iron or steel, closed-die forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills)Import1months published, 2025-06 to 2025-06
12
months published, 2021-10 to 2026-02
8501 52 20AC motors, multi-phase, of an output > 750 W but <= 7,5 kWImportExport11months published, 2023-11 to 2026-04
8501 52 30AC motors, multi-phase, of an output > 7,5 kW but <= 37 kWImportExport7months published, 2022-01 to 2025-09
8537 10 91Programmable memory controllers (excl. numerical control panels with built-in automatic data-processing machines)Import5months published, 2022-06 to 2026-07
Show the 17 sampled codesShow fewer codesexpand_moreexpand_less
8501 51 00AC motors, multi-phase, of an output > 37,5 W but <= 750 WExport4months published, 2023-11 to 2025-05
8536 50 19Switches for a voltage of <= 60 V (excl. relays, push-button switches and rotary switches)Import4months published, 2022-03 to 2025-12
8536 90 95Electrical apparatus for making connections to or in electrical circuits, for a voltage <= 1.000 V (excl. fuses, circuit breakers and other apparatus for protecting electrical circuits, relays and other switches, lamp holders, plugs and sockets, prefabricated elements for electrical circuits, connections and contact elements for wire and cables, and car battery clamps)Import4months published, 2024-06 to 2025-12
8537 10 98Boards, cabinets and similar combinations of apparatus for electric control or the distribution of electricity, for a voltage <= 1.000 V (excl. switching apparatus for line telephony or line telegraphy, numerical control panels with built-in automatic data-processing machines, programmable memory controllers and touch screens)Import4months published, 2025-03 to 2025-10
8501 53 81AC motors, multi-phase, of an output of > 75 kW but <= 375 kW (excl. traction motors)Export3months published, 2023-06 to 2025-11
8542 90 00Parts of electronic integrated circuits, n.e.s.Import3months published, 2024-11 to 2025-12
8504 40 85Inverters having power handling capacity <= 7,5 kVAImportExport2months published, 2024-05 to 2024-07
8503 00 99Parts suitable for use solely or principally with electric motors and generators, electric generating sets and rotary converters, n.e.s. (excl. non-magnetic retaining rings and of cast iron or cast steel)Import1months published, 2022-11 to 2022-11
8504 40 86Inverters having power handling capacity > 7,5 kVAExport1months published, 2025-05 to 2025-05
8504 40 95Static converters (excl. accumulator chargers, rectifiers, and inverters)Import1months published, 2025-09 to 2025-09
8525 89 00Television cameras, digital cameras and video camera recorders (excl. high-speed, radiation-hardened or radiation-tolerant, and night vision goods)Import1months published, 2026-02 to 2026-02
8531 20 95Indicator panels with liquid crystal devices "LCD" (excl. active matrix liquid crystal devices and those of a kind used for motor vehicles, cycles or traffic signalling)Import1months published, 2026-02 to 2026-02
8534 00 90Printed circuits consisting of conductor elements, contacts and other passive elements (excl. those with passive and active elements)Import1months published, 2026-02 to 2026-02
10
months published, 2022-04 to 2026-06
9026 10 89Instruments and apparatus for measuring or checking the flow or level of liquids, non-electronic (excl. flow meters, meters and regulators)Import8months published, 2022-03 to 2026-02
9026 80 20Electronic instruments or apparatus for measuring or checking variables of liquids or gases, n.e.s.ImportExport5months published, 2024-10 to 2026-07
9026 20 80Instruments and apparatus for measuring or checking pressure of liquids or gases, non-electronic (excl. spiral or metal diaphragm type pressure gauges, and regulators)Import3months published, 2022-05 to 2024-11
Show the 12 sampled codesShow fewer codesexpand_moreexpand_less
9025 19 00Thermometers and pyrometers, not combined with other instruments (excl. liquid-filled thermometers for direct reading)Import2months published, 2023-08 to 2023-11
9032 89 00Regulating or controlling instruments and apparatus (excl. hydraulic or pneumatic, manostats, thermostats, and taps, cocks and valves of heading 8481)ImportExport2months published, 2024-07 to 2024-09
9023 00 10Instruments, apparatus and models for teaching physics, chemistry or technical subjectsImportExport1months published, 2021-09 to 2021-09
9026 10 21Electronic flow meters for measuring or checking the flow or level of liquids (excl. meters and regulators)Import1months published, 2025-03 to 2025-03
9026 10 81Flow meters for measuring or checking the flow or level of liquids, non-electronic (excl. meters and regulators)Import1months published, 2023-10 to 2023-10
9026 20 40Spiral or metal diaphragm type pressure gaugesExport1months published, 2021-12 to 2021-12
9029 10 00Revolution counters, production counters, taximeters, milometers, pedometers and the like (excl. gas, liquid and electricity meters)Import1months published, 2023-07 to 2023-07
9032 81 00Hydraulic or pneumatic regulating or controlling instruments and apparatus (excl. manostats and taps, cocks and valves of heading 8481)Export1months published, 2024-12 to 2024-12
12
months published, 2022-12 to 2026-05
4016 10 00Articles of cellular rubber, n.e.s.Import1months published, 2025-01 to 2025-01
4016 99 97Articles of vulcanised rubber, n.e.s. (excl. hard rubber and those of cellular rubber)Import1months published, 2026-03 to 2026-03
46
months published, 2021-08 to 2026-06
3917 40 00Fittings, e.g. joints, elbows, flanges, of plastics, for tubes, pipes and hosesImport1months published, 2025-04 to 2025-04
16
months published, 2022-02 to 2025-09
4901 10 00Printed books, brochures and similar printed matter, in single sheets, whether or not folded (excl. periodicals and publications which are essentially devoted to advertising)Export1months published, 2026-05 to 2026-05
months published, 2021-09 to 2026-07
5911 90 10Felt products and articles, for technical purposes, specified in Note 7 to chapter 59, n.e.s.Import1months published, 2025-10 to 2025-10
months published, 2023-05 to 2026-04
6909 12 00Ceramic articles having a hardness equivalent to >= 9 on the Mohs scale, for chemical or other technical uses (excl. of porcelain or china, refractory ceramic goods, electrical devices, insulators and other electrical insulating fittings)Import1months published, 2024-03 to 2024-03
1
months published, 2025-05 to 2025-05
1
months published, 2022-03 to 2022-03
1
months published, 2026-01 to 2026-01
1
months published, 2023-07 to 2023-07
months published, 2025-07 to 2026-06
months published, 2022-03 to 2024-03
months published, 2024-04 to 2025-11
months published, 2023-06 to 2025-04
months published, 2025-12 to 2025-12
KINDER-JANES ENGINEERS LTD · Tradaro
On the same codes
Traders published against the most of the same codes. A shared code is a shared commodity, not a relationship between them.